Mevotech MB40330 Wheel Bearing and Hub Assembly - Front
Mevotech MB40330 Wheel Bearing Hub Assembly
The Mevotech MB40330 is a Gen 3 wheel bearing and hub assembly built for high-use passenger vehicles, SUVs, fleets, and working trucks. It features a pre-greased design and an integrated ABS sensor for a direct replacement on supported applications.
Key Features
- Wheel bearing and hub assembly for driveline and axle service
- Gen 3 bearing generation for modern hub applications
- Pre-greased for ready-to-install service
- Integrated anti-lock brake sensor included
- 4 flange bolt holes for secure mounting
- 10 wheel studs for wheel attachment
- 45.0 inside diameter and 203.2 outside diameter
Detailed Description
Mevotech Supreme Parts are engineered in-house with application-specific upgrades aimed at durability and consistent performance in demanding service. The MB40330 hub bearing assembly is built for commercial and passenger use where frequent load cycles and road exposure place added stress on the hub. For technicians servicing Ford Super Duty applications, this part number is a direct-fit style replacement designed around the original hub architecture.
This part cross-references Timken HA590724 and SKF BR930962 for the same application. The MB40330 also aligns with OE-style replacement needs for Ford F-250 Super Duty and Ford F-350 Super Duty service work where a complete hub and bearing unit is required.
What It Helps Fix
- Wheel bearing noise such as humming, growling, or rumbling
- Excessive hub play or looseness at the wheel end
- ABS warning light concerns tied to the hub sensor
- Uneven wheel rotation caused by worn bearing surfaces
- Hub service issues on Ford F-250 Super Duty and Ford F-350 Super Duty applications
Installation Notes and Tips
Verify axle, sensor, and flange specifications before installation. Because this assembly includes an ABS sensor, inspect the connector and wiring path during replacement. Clean the mounting surface thoroughly, torque fasteners to the vehicle manufacturer’s specification, and confirm proper wheel-end operation after installation. For Ford F-250 Super Duty and Ford F-350 Super Duty service, matching the hub to the exact application is important for correct fit and ABS function.
Quality Assurance
Mevotech Supreme hub bearing assemblies are engineered for demanding daily use in fleet, commercial, and passenger vehicle service. The MB40330 is built as a complete hub assembly with pre-greased internals and integrated sensor support for consistent replacement performance.
Mevotech MB40330 Wheel Bearing Hub Assembly
The Mevotech MB40330 is a Gen 3 wheel bearing and hub assembly built for high-use passenger vehicles, SUVs, fleets, and working trucks. It features a pre-greased design and an integrated ABS sensor for a direct replacement on supported applications.
Key Features
- Wheel bearing and hub assembly for driveline and axle service
- Gen 3 bearing generation for modern hub applications
- Pre-greased for ready-to-install service
- Integrated anti-lock brake sensor included
- 4 flange bolt holes for secure mounting
- 10 wheel studs for wheel attachment
- 45.0 inside diameter and 203.2 outside diameter
Detailed Description
Mevotech Supreme Parts are engineered in-house with application-specific upgrades aimed at durability and consistent performance in demanding service. The MB40330 hub bearing assembly is built for commercial and passenger use where frequent load cycles and road exposure place added stress on the hub. For technicians servicing Ford Super Duty applications, this part number is a direct-fit style replacement designed around the original hub architecture.
This part cross-references Timken HA590724 and SKF BR930962 for the same application. The MB40330 also aligns with OE-style replacement needs for Ford F-250 Super Duty and Ford F-350 Super Duty service work where a complete hub and bearing unit is required.
What It Helps Fix
- Wheel bearing noise such as humming, growling, or rumbling
- Excessive hub play or looseness at the wheel end
- ABS warning light concerns tied to the hub sensor
- Uneven wheel rotation caused by worn bearing surfaces
- Hub service issues on Ford F-250 Super Duty and Ford F-350 Super Duty applications
Installation Notes and Tips
Verify axle, sensor, and flange specifications before installation. Because this assembly includes an ABS sensor, inspect the connector and wiring path during replacement. Clean the mounting surface thoroughly, torque fasteners to the vehicle manufacturer’s specification, and confirm proper wheel-end operation after installation. For Ford F-250 Super Duty and Ford F-350 Super Duty service, matching the hub to the exact application is important for correct fit and ABS function.
Quality Assurance
Mevotech Supreme hub bearing assemblies are engineered for demanding daily use in fleet, commercial, and passenger vehicle service. The MB40330 is built as a complete hub assembly with pre-greased internals and integrated sensor support for consistent replacement performance.
Description
Mevotech MB40330 Wheel Bearing Hub Assembly
The Mevotech MB40330 is a Gen 3 wheel bearing and hub assembly built for high-use passenger vehicles, SUVs, fleets, and working trucks. It features a pre-greased design and an integrated ABS sensor for a direct replacement on supported applications.
Key Features
- Wheel bearing and hub assembly for driveline and axle service
- Gen 3 bearing generation for modern hub applications
- Pre-greased for ready-to-install service
- Integrated anti-lock brake sensor included
- 4 flange bolt holes for secure mounting
- 10 wheel studs for wheel attachment
- 45.0 inside diameter and 203.2 outside diameter
Detailed Description
Mevotech Supreme Parts are engineered in-house with application-specific upgrades aimed at durability and consistent performance in demanding service. The MB40330 hub bearing assembly is built for commercial and passenger use where frequent load cycles and road exposure place added stress on the hub. For technicians servicing Ford Super Duty applications, this part number is a direct-fit style replacement designed around the original hub architecture.
This part cross-references Timken HA590724 and SKF BR930962 for the same application. The MB40330 also aligns with OE-style replacement needs for Ford F-250 Super Duty and Ford F-350 Super Duty service work where a complete hub and bearing unit is required.
What It Helps Fix
- Wheel bearing noise such as humming, growling, or rumbling
- Excessive hub play or looseness at the wheel end
- ABS warning light concerns tied to the hub sensor
- Uneven wheel rotation caused by worn bearing surfaces
- Hub service issues on Ford F-250 Super Duty and Ford F-350 Super Duty applications
Installation Notes and Tips
Verify axle, sensor, and flange specifications before installation. Because this assembly includes an ABS sensor, inspect the connector and wiring path during replacement. Clean the mounting surface thoroughly, torque fasteners to the vehicle manufacturer’s specification, and confirm proper wheel-end operation after installation. For Ford F-250 Super Duty and Ford F-350 Super Duty service, matching the hub to the exact application is important for correct fit and ABS function.
Quality Assurance
Mevotech Supreme hub bearing assemblies are engineered for demanding daily use in fleet, commercial, and passenger vehicle service. The MB40330 is built as a complete hub assembly with pre-greased internals and integrated sensor support for consistent replacement performance.
