Mevotech H515036HW Wheel Bearing and Hub Assembly - Front
Front Wheel Bearing Hub Assembly
Mevotech H515036HW is a front wheel bearing and hub assembly built for high-usage passenger vehicles, SUVs, fleets, and working trucks. It combines a Gen 3 roll-form design with a pre-greased bearing and an integrated ABS sensor for a direct-fit front hub service on select Chevrolet, GMC, and Cadillac applications.
Key Features
- Front wheel bearing and hub assembly for select GM full-size trucks, vans, and SUVs
- Gen 3 roll-form design for application-specific durability
- ABS sensor included for vehicles equipped with wheel speed sensing
- Pre-greased for service-ready installation
- 3 flange bolt holes and 6 bolt holes for the specified fitments
- Outside diameter: 179 mm; inside diameter: 78.4 mm
- Mevotech H515036HW part number for accurate ordering and replacement matching
Detailed Description
Mevotech Supreme hub bearing assemblies are engineered in-house with upgrades tailored to the demands of commercial use and daily driving. This H515036HW front hub assembly is designed for select Chevrolet Express 1500, GMC Savana 1500, Chevrolet Silverado 1500, GMC Sierra 1500, Cadillac Escalade, Chevrolet Tahoe, and related front axle applications. The integrated ABS sensor and pre-greased construction help streamline service while the roll-form hub design supports consistent performance in demanding front-end conditions. If you are replacing a worn front hub on a Chevrolet Silverado 1500 or GMC Sierra 1500, Mevotech H515036HW provides a direct replacement option built around the original application requirements.
This part cross-references OE part number 15863441 for the same application.
Common Problems This Part Can Address
- Front wheel bearing noise or growling from the hub area
- ABS warning light caused by a failing hub sensor assembly
- Wheel play or looseness at the front hub
- Uneven front-end vibration related to hub wear
- Service issues on high-mileage Chevrolet, GMC, and Cadillac front hubs
Installation Notes and Tips
Confirm the vehicle’s front hub configuration, including 6-stud hub notes where listed, before installation. Verify flange bolt hole count, bolt pattern, and ABS sensor connection against the removed part. Clean the mounting surface thoroughly and inspect adjacent steering and suspension components during service. For best results, follow the vehicle manufacturer’s torque specifications and use the correct front hub procedure for the specific Chevrolet, GMC, or Cadillac model.
Quality Assurance
Mevotech Supreme Parts are engineered in-house with application-specific upgrades for durability and performance. The H515036HW is built for front-end service on high-usage vehicles and fleets, with a design focused on easier installation and dependable fitment across the listed applications.
Front Wheel Bearing Hub Assembly
Mevotech H515036HW is a front wheel bearing and hub assembly built for high-usage passenger vehicles, SUVs, fleets, and working trucks. It combines a Gen 3 roll-form design with a pre-greased bearing and an integrated ABS sensor for a direct-fit front hub service on select Chevrolet, GMC, and Cadillac applications.
Key Features
- Front wheel bearing and hub assembly for select GM full-size trucks, vans, and SUVs
- Gen 3 roll-form design for application-specific durability
- ABS sensor included for vehicles equipped with wheel speed sensing
- Pre-greased for service-ready installation
- 3 flange bolt holes and 6 bolt holes for the specified fitments
- Outside diameter: 179 mm; inside diameter: 78.4 mm
- Mevotech H515036HW part number for accurate ordering and replacement matching
Detailed Description
Mevotech Supreme hub bearing assemblies are engineered in-house with upgrades tailored to the demands of commercial use and daily driving. This H515036HW front hub assembly is designed for select Chevrolet Express 1500, GMC Savana 1500, Chevrolet Silverado 1500, GMC Sierra 1500, Cadillac Escalade, Chevrolet Tahoe, and related front axle applications. The integrated ABS sensor and pre-greased construction help streamline service while the roll-form hub design supports consistent performance in demanding front-end conditions. If you are replacing a worn front hub on a Chevrolet Silverado 1500 or GMC Sierra 1500, Mevotech H515036HW provides a direct replacement option built around the original application requirements.
This part cross-references OE part number 15863441 for the same application.
Common Problems This Part Can Address
- Front wheel bearing noise or growling from the hub area
- ABS warning light caused by a failing hub sensor assembly
- Wheel play or looseness at the front hub
- Uneven front-end vibration related to hub wear
- Service issues on high-mileage Chevrolet, GMC, and Cadillac front hubs
Installation Notes and Tips
Confirm the vehicle’s front hub configuration, including 6-stud hub notes where listed, before installation. Verify flange bolt hole count, bolt pattern, and ABS sensor connection against the removed part. Clean the mounting surface thoroughly and inspect adjacent steering and suspension components during service. For best results, follow the vehicle manufacturer’s torque specifications and use the correct front hub procedure for the specific Chevrolet, GMC, or Cadillac model.
Quality Assurance
Mevotech Supreme Parts are engineered in-house with application-specific upgrades for durability and performance. The H515036HW is built for front-end service on high-usage vehicles and fleets, with a design focused on easier installation and dependable fitment across the listed applications.
Original: $126.71
-65%$126.71
$44.35Description
Front Wheel Bearing Hub Assembly
Mevotech H515036HW is a front wheel bearing and hub assembly built for high-usage passenger vehicles, SUVs, fleets, and working trucks. It combines a Gen 3 roll-form design with a pre-greased bearing and an integrated ABS sensor for a direct-fit front hub service on select Chevrolet, GMC, and Cadillac applications.
Key Features
- Front wheel bearing and hub assembly for select GM full-size trucks, vans, and SUVs
- Gen 3 roll-form design for application-specific durability
- ABS sensor included for vehicles equipped with wheel speed sensing
- Pre-greased for service-ready installation
- 3 flange bolt holes and 6 bolt holes for the specified fitments
- Outside diameter: 179 mm; inside diameter: 78.4 mm
- Mevotech H515036HW part number for accurate ordering and replacement matching
Detailed Description
Mevotech Supreme hub bearing assemblies are engineered in-house with upgrades tailored to the demands of commercial use and daily driving. This H515036HW front hub assembly is designed for select Chevrolet Express 1500, GMC Savana 1500, Chevrolet Silverado 1500, GMC Sierra 1500, Cadillac Escalade, Chevrolet Tahoe, and related front axle applications. The integrated ABS sensor and pre-greased construction help streamline service while the roll-form hub design supports consistent performance in demanding front-end conditions. If you are replacing a worn front hub on a Chevrolet Silverado 1500 or GMC Sierra 1500, Mevotech H515036HW provides a direct replacement option built around the original application requirements.
This part cross-references OE part number 15863441 for the same application.
Common Problems This Part Can Address
- Front wheel bearing noise or growling from the hub area
- ABS warning light caused by a failing hub sensor assembly
- Wheel play or looseness at the front hub
- Uneven front-end vibration related to hub wear
- Service issues on high-mileage Chevrolet, GMC, and Cadillac front hubs
Installation Notes and Tips
Confirm the vehicle’s front hub configuration, including 6-stud hub notes where listed, before installation. Verify flange bolt hole count, bolt pattern, and ABS sensor connection against the removed part. Clean the mounting surface thoroughly and inspect adjacent steering and suspension components during service. For best results, follow the vehicle manufacturer’s torque specifications and use the correct front hub procedure for the specific Chevrolet, GMC, or Cadillac model.
Quality Assurance
Mevotech Supreme Parts are engineered in-house with application-specific upgrades for durability and performance. The H515036HW is built for front-end service on high-usage vehicles and fleets, with a design focused on easier installation and dependable fitment across the listed applications.
