Mevotech H513197 Wheel Bearing and Hub Assembly - Front or Rear
Wheel Bearing Hub Assembly for Select GM Vehicles
Mevotech H513197 is a front or rear wheel bearing and hub assembly engineered for select Cadillac, Chevrolet, Buick, and Pontiac applications. Built as a Gen 3 design with a pre-greased bearing and an included ABS sensor, it is made for service on high-use passenger vehicles, SUVs, fleets, and working trucks.
For shoppers searching for a wheel bearing and hub assembly for 2004-2009 Cadillac SRX front, 2004-2007 Cadillac CTS front, or 2006-2009 Chevrolet Uplander rear, this Mevotech Supreme part number H513197 provides the application-specific fitment and hub configuration needed for the listed vehicles.
Key Features
- Part type: wheel bearing and hub assembly
- Mevotech Supreme Parts engineered in-house for application-specific durability upgrades
- Gen 3 design for the listed hub applications
- ABS sensor included
- Pre-greased for service-ready installation
- Outside diameter: 145.5 mm
- Inside diameter: 70.6 mm
- 6-bolt hub design with 3 flange bolt holes
Detailed Description
Mevotech H513197 is built for direct replacement on confirmed applications that require a 6-stud front hub or a rear hub with a 3-hole triangular flange. It is listed for 2011 Cadillac STS front with 6 stud hub, 2005-2010 Cadillac STS front with 6 stud hub and Brembo brake system on select years, 2004-2009 Cadillac SRX front, 2004-2007 Cadillac CTS front, 2006-2009 Chevrolet Uplander rear, 2006-2009 Pontiac Montana rear, and 2006-2007 Buick Terraza rear.
This part cross-references Timken HA590077 and SKF BR930313 for the same application. Mevotech Supreme hub bearing assemblies are designed for demanding daily use, and the Labor Saver design focus helps streamline the replacement process on the vehicles listed above.
What This Part Helps Address
- Wheel bearing noise such as humming or growling from the hub area
- Excessive wheel play or looseness at the hub
- ABS warning light concerns related to a failed hub sensor
- Uneven hub rotation or rough bearing feel during inspection
- Hub replacement needs on Cadillac SRX, Cadillac CTS, and Chevrolet Uplander applications
Installation Notes and Tips
Verify the vehicle’s brake package, hub style, and axle position before ordering. This assembly is listed for front applications on Cadillac STS, Cadillac SRX, and Cadillac CTS, and rear applications on Chevrolet Uplander, Pontiac Montana, and Buick Terraza. Confirm whether the vehicle uses the 6 stud hub or the 3-hole triangular flange configuration shown in the fitment notes.
Because the ABS sensor is included and the unit is pre-greased, installation can be more straightforward than rebuilding a worn hub. Always compare the original part, bolt pattern, and sensor connection before final assembly.
Quality Assurance
Mevotech Supreme Parts are engineered in-house with application-specific upgrades aimed at durability and performance for commercial and passenger vehicle service. H513197 is built as a service-ready hub bearing assembly for the listed GM fitments.
Wheel Bearing Hub Assembly for Select GM Vehicles
Mevotech H513197 is a front or rear wheel bearing and hub assembly engineered for select Cadillac, Chevrolet, Buick, and Pontiac applications. Built as a Gen 3 design with a pre-greased bearing and an included ABS sensor, it is made for service on high-use passenger vehicles, SUVs, fleets, and working trucks.
For shoppers searching for a wheel bearing and hub assembly for 2004-2009 Cadillac SRX front, 2004-2007 Cadillac CTS front, or 2006-2009 Chevrolet Uplander rear, this Mevotech Supreme part number H513197 provides the application-specific fitment and hub configuration needed for the listed vehicles.
Key Features
- Part type: wheel bearing and hub assembly
- Mevotech Supreme Parts engineered in-house for application-specific durability upgrades
- Gen 3 design for the listed hub applications
- ABS sensor included
- Pre-greased for service-ready installation
- Outside diameter: 145.5 mm
- Inside diameter: 70.6 mm
- 6-bolt hub design with 3 flange bolt holes
Detailed Description
Mevotech H513197 is built for direct replacement on confirmed applications that require a 6-stud front hub or a rear hub with a 3-hole triangular flange. It is listed for 2011 Cadillac STS front with 6 stud hub, 2005-2010 Cadillac STS front with 6 stud hub and Brembo brake system on select years, 2004-2009 Cadillac SRX front, 2004-2007 Cadillac CTS front, 2006-2009 Chevrolet Uplander rear, 2006-2009 Pontiac Montana rear, and 2006-2007 Buick Terraza rear.
This part cross-references Timken HA590077 and SKF BR930313 for the same application. Mevotech Supreme hub bearing assemblies are designed for demanding daily use, and the Labor Saver design focus helps streamline the replacement process on the vehicles listed above.
What This Part Helps Address
- Wheel bearing noise such as humming or growling from the hub area
- Excessive wheel play or looseness at the hub
- ABS warning light concerns related to a failed hub sensor
- Uneven hub rotation or rough bearing feel during inspection
- Hub replacement needs on Cadillac SRX, Cadillac CTS, and Chevrolet Uplander applications
Installation Notes and Tips
Verify the vehicle’s brake package, hub style, and axle position before ordering. This assembly is listed for front applications on Cadillac STS, Cadillac SRX, and Cadillac CTS, and rear applications on Chevrolet Uplander, Pontiac Montana, and Buick Terraza. Confirm whether the vehicle uses the 6 stud hub or the 3-hole triangular flange configuration shown in the fitment notes.
Because the ABS sensor is included and the unit is pre-greased, installation can be more straightforward than rebuilding a worn hub. Always compare the original part, bolt pattern, and sensor connection before final assembly.
Quality Assurance
Mevotech Supreme Parts are engineered in-house with application-specific upgrades aimed at durability and performance for commercial and passenger vehicle service. H513197 is built as a service-ready hub bearing assembly for the listed GM fitments.
Description
Wheel Bearing Hub Assembly for Select GM Vehicles
Mevotech H513197 is a front or rear wheel bearing and hub assembly engineered for select Cadillac, Chevrolet, Buick, and Pontiac applications. Built as a Gen 3 design with a pre-greased bearing and an included ABS sensor, it is made for service on high-use passenger vehicles, SUVs, fleets, and working trucks.
For shoppers searching for a wheel bearing and hub assembly for 2004-2009 Cadillac SRX front, 2004-2007 Cadillac CTS front, or 2006-2009 Chevrolet Uplander rear, this Mevotech Supreme part number H513197 provides the application-specific fitment and hub configuration needed for the listed vehicles.
Key Features
- Part type: wheel bearing and hub assembly
- Mevotech Supreme Parts engineered in-house for application-specific durability upgrades
- Gen 3 design for the listed hub applications
- ABS sensor included
- Pre-greased for service-ready installation
- Outside diameter: 145.5 mm
- Inside diameter: 70.6 mm
- 6-bolt hub design with 3 flange bolt holes
Detailed Description
Mevotech H513197 is built for direct replacement on confirmed applications that require a 6-stud front hub or a rear hub with a 3-hole triangular flange. It is listed for 2011 Cadillac STS front with 6 stud hub, 2005-2010 Cadillac STS front with 6 stud hub and Brembo brake system on select years, 2004-2009 Cadillac SRX front, 2004-2007 Cadillac CTS front, 2006-2009 Chevrolet Uplander rear, 2006-2009 Pontiac Montana rear, and 2006-2007 Buick Terraza rear.
This part cross-references Timken HA590077 and SKF BR930313 for the same application. Mevotech Supreme hub bearing assemblies are designed for demanding daily use, and the Labor Saver design focus helps streamline the replacement process on the vehicles listed above.
What This Part Helps Address
- Wheel bearing noise such as humming or growling from the hub area
- Excessive wheel play or looseness at the hub
- ABS warning light concerns related to a failed hub sensor
- Uneven hub rotation or rough bearing feel during inspection
- Hub replacement needs on Cadillac SRX, Cadillac CTS, and Chevrolet Uplander applications
Installation Notes and Tips
Verify the vehicle’s brake package, hub style, and axle position before ordering. This assembly is listed for front applications on Cadillac STS, Cadillac SRX, and Cadillac CTS, and rear applications on Chevrolet Uplander, Pontiac Montana, and Buick Terraza. Confirm whether the vehicle uses the 6 stud hub or the 3-hole triangular flange configuration shown in the fitment notes.
Because the ABS sensor is included and the unit is pre-greased, installation can be more straightforward than rebuilding a worn hub. Always compare the original part, bolt pattern, and sensor connection before final assembly.
Quality Assurance
Mevotech Supreme Parts are engineered in-house with application-specific upgrades aimed at durability and performance for commercial and passenger vehicle service. H513197 is built as a service-ready hub bearing assembly for the listed GM fitments.
