Mevotech H513096 Wheel Bearing and Hub Assembly - Front
Front Wheel Bearing Hub Assembly for BMW
The Mevotech H513096 is a front wheel bearing and hub assembly engineered for select BMW applications, including 1991-1993 BMW M5 and other 7 Series and 8 Series front fitments. Built as a pre-greased, Gen 3 roll-form design, it is made for demanding daily use in passenger vehicles and working applications.
Key Features
- Front wheel bearing and hub assembly for select BMW models
- Pre-greased for ready-to-install service
- Gen 3 roll-form design for improved assembly construction
- Non-integral ABS sensor configuration
- 5-bolt hole hub design
- Inside diameter: 79 mm
- Outside diameter: 138.8 mm
- Mevotech H513096 part number for catalog matching
Detailed Description
Mevotech Supreme Parts are engineered in-house with application-specific upgrades focused on durability and performance. The H513096 hub bearing assembly is part of that line and is built for front-end service on select BMW vehicles, including BMW M5, BMW 525i, BMW 535i, BMW 735i, BMW 735iL, BMW 750iL, and BMW 850i applications. If you are searching for a front wheel bearing hub assembly for BMW M5 or a Mevotech H513096 replacement for a BMW 735i front hub, this part is built to match those requirements.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Front wheel bearing noise or growling
- Hub play or looseness at the wheel
- Uneven wheel rotation caused by worn bearing surfaces
- ABS-related service needs on non-integral sensor setups
- Front-end vibration tied to hub wear
Installation Notes and Tips
Confirm the vehicle’s year breakpoints before ordering, especially for 1991 BMW 525i, 1991 BMW 535i, and 1992 BMW 850i applications with date-specific notes. Verify the front position, bolt pattern, inside diameter, and outside diameter against the removed part before installation. Because this assembly is pre-greased, it is ready for service once the mounting surfaces are cleaned and inspected.
Quality Assurance
Mevotech Supreme hub bearing assemblies are built with application-specific engineering for commercial and passenger vehicle use. The H513096 follows Mevotech’s Supreme Parts construction approach and is designed for consistent front hub service on the listed BMW fitments.
- Fits 1991-1993 BMW M5, front
- Fits 1992 BMW 850i, front, to 3/1992
- Fits 1991 BMW 525i, front, to 3/1991
- Fits 1991 BMW 535i, front, to 03/31/1991
- Fits 1987-1991 BMW 735i, front
- Fits 1988-1991 BMW 735iL, front
- Fits 1988-1991 BMW 750iL, front
- Fits 1991 BMW 850i, front
- Fits 1989-1990 BMW 525i, front
- Fits 1989-1990 BMW 535i, front
Front Wheel Bearing Hub Assembly for BMW
The Mevotech H513096 is a front wheel bearing and hub assembly engineered for select BMW applications, including 1991-1993 BMW M5 and other 7 Series and 8 Series front fitments. Built as a pre-greased, Gen 3 roll-form design, it is made for demanding daily use in passenger vehicles and working applications.
Key Features
- Front wheel bearing and hub assembly for select BMW models
- Pre-greased for ready-to-install service
- Gen 3 roll-form design for improved assembly construction
- Non-integral ABS sensor configuration
- 5-bolt hole hub design
- Inside diameter: 79 mm
- Outside diameter: 138.8 mm
- Mevotech H513096 part number for catalog matching
Detailed Description
Mevotech Supreme Parts are engineered in-house with application-specific upgrades focused on durability and performance. The H513096 hub bearing assembly is part of that line and is built for front-end service on select BMW vehicles, including BMW M5, BMW 525i, BMW 535i, BMW 735i, BMW 735iL, BMW 750iL, and BMW 850i applications. If you are searching for a front wheel bearing hub assembly for BMW M5 or a Mevotech H513096 replacement for a BMW 735i front hub, this part is built to match those requirements.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Front wheel bearing noise or growling
- Hub play or looseness at the wheel
- Uneven wheel rotation caused by worn bearing surfaces
- ABS-related service needs on non-integral sensor setups
- Front-end vibration tied to hub wear
Installation Notes and Tips
Confirm the vehicle’s year breakpoints before ordering, especially for 1991 BMW 525i, 1991 BMW 535i, and 1992 BMW 850i applications with date-specific notes. Verify the front position, bolt pattern, inside diameter, and outside diameter against the removed part before installation. Because this assembly is pre-greased, it is ready for service once the mounting surfaces are cleaned and inspected.
Quality Assurance
Mevotech Supreme hub bearing assemblies are built with application-specific engineering for commercial and passenger vehicle use. The H513096 follows Mevotech’s Supreme Parts construction approach and is designed for consistent front hub service on the listed BMW fitments.
- Fits 1991-1993 BMW M5, front
- Fits 1992 BMW 850i, front, to 3/1992
- Fits 1991 BMW 525i, front, to 3/1991
- Fits 1991 BMW 535i, front, to 03/31/1991
- Fits 1987-1991 BMW 735i, front
- Fits 1988-1991 BMW 735iL, front
- Fits 1988-1991 BMW 750iL, front
- Fits 1991 BMW 850i, front
- Fits 1989-1990 BMW 525i, front
- Fits 1989-1990 BMW 535i, front
Original: $50.95
-65%$50.95
$17.83Description
Front Wheel Bearing Hub Assembly for BMW
The Mevotech H513096 is a front wheel bearing and hub assembly engineered for select BMW applications, including 1991-1993 BMW M5 and other 7 Series and 8 Series front fitments. Built as a pre-greased, Gen 3 roll-form design, it is made for demanding daily use in passenger vehicles and working applications.
Key Features
- Front wheel bearing and hub assembly for select BMW models
- Pre-greased for ready-to-install service
- Gen 3 roll-form design for improved assembly construction
- Non-integral ABS sensor configuration
- 5-bolt hole hub design
- Inside diameter: 79 mm
- Outside diameter: 138.8 mm
- Mevotech H513096 part number for catalog matching
Detailed Description
Mevotech Supreme Parts are engineered in-house with application-specific upgrades focused on durability and performance. The H513096 hub bearing assembly is part of that line and is built for front-end service on select BMW vehicles, including BMW M5, BMW 525i, BMW 535i, BMW 735i, BMW 735iL, BMW 750iL, and BMW 850i applications. If you are searching for a front wheel bearing hub assembly for BMW M5 or a Mevotech H513096 replacement for a BMW 735i front hub, this part is built to match those requirements.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Front wheel bearing noise or growling
- Hub play or looseness at the wheel
- Uneven wheel rotation caused by worn bearing surfaces
- ABS-related service needs on non-integral sensor setups
- Front-end vibration tied to hub wear
Installation Notes and Tips
Confirm the vehicle’s year breakpoints before ordering, especially for 1991 BMW 525i, 1991 BMW 535i, and 1992 BMW 850i applications with date-specific notes. Verify the front position, bolt pattern, inside diameter, and outside diameter against the removed part before installation. Because this assembly is pre-greased, it is ready for service once the mounting surfaces are cleaned and inspected.
Quality Assurance
Mevotech Supreme hub bearing assemblies are built with application-specific engineering for commercial and passenger vehicle use. The H513096 follows Mevotech’s Supreme Parts construction approach and is designed for consistent front hub service on the listed BMW fitments.
- Fits 1991-1993 BMW M5, front
- Fits 1992 BMW 850i, front, to 3/1992
- Fits 1991 BMW 525i, front, to 3/1991
- Fits 1991 BMW 535i, front, to 03/31/1991
- Fits 1987-1991 BMW 735i, front
- Fits 1988-1991 BMW 735iL, front
- Fits 1988-1991 BMW 750iL, front
- Fits 1991 BMW 850i, front
- Fits 1989-1990 BMW 525i, front
- Fits 1989-1990 BMW 535i, front
