Mevotech H513041 Wheel Bearing and Hub Assembly - Rear
Rear Wheel Bearing Hub Assembly for GM Applications
Mevotech H513041 is a rear wheel bearing and hub assembly built for select Buick, Cadillac, Oldsmobile, and Pontiac vehicles from 1987-1990. It is a Gen 3 design with a pre-greased construction, a non-integral ABS sensor, and a 5-bolt hub pattern for direct replacement service.
Key Features
- Part number H513041 for rear hub and bearing replacement
- Gen 3 design for application-specific fitment
- Pre-greased assembly for ready-to-install service
- Non-integral ABS sensor configuration
- 150.5 mm outside diameter and 70.6 mm inside diameter
- 5 bolt holes with 4 flange bolt holes
Detailed Product Overview
Mevotech Supreme hub bearing assemblies are engineered in-house with upgrades tailored to the demands of higher-use passenger vehicles, SUVs, fleets, and working trucks. This H513041 assembly follows that approach with a service-focused design that supports rear wheel bearing replacement on vehicles such as the Buick LeSabre, Cadillac DeVille, and Pontiac Bonneville. The H513041 is built for applications that require a rear hub assembly with a non-integral ABS sensor and a pre-greased bearing package.
This part cross-references Timken 513041 for the same application.
Vehicle Fitment
- Fits 1988-1990 Buick LeSabre, Rear
- Fits 1988-1990 Buick Reatta, Rear
- Fits 1988-1990 Buick Riviera, Rear
- Fits 1988-1990 Cadillac Allante, Rear
- Fits 1987-1990 Cadillac DeVille, Rear
- Fits 1988-1990 Cadillac Eldorado, Rear
- Fits 1988-1990 Cadillac Seville, Rear
- Fits 1988-1990 Oldsmobile Delta 88, Rear
- Fits 1988-1990 Oldsmobile Toronado, Rear
- Fits 1988-1990 Pontiac Bonneville, Rear
Common Replacement Uses
- Rear wheel bearing noise or rough rotation
- Hub play or looseness at the rear wheel
- ABS-related service on a non-integral sensor setup
- Restoring proper rear hub support on GM full-size and luxury models
- Replacing a worn rear hub assembly on Buick, Cadillac, Oldsmobile, or Pontiac vehicles
Installation Notes
Confirm rear axle application, bolt pattern, and sensor configuration before installation. Match the part to the vehicle’s original hub dimensions and mounting points, and inspect surrounding brake and suspension components during service. Because this assembly is pre-greased, it is ready for installation once the mounting surfaces are cleaned and verified.
Quality Assurance
Mevotech Supreme parts are engineered in-house with application-specific upgrades aimed at durability and service efficiency. The Labor Saver design approach is used to simplify installation and reduce service time where the application allows.
Rear Wheel Bearing Hub Assembly for GM Applications
Mevotech H513041 is a rear wheel bearing and hub assembly built for select Buick, Cadillac, Oldsmobile, and Pontiac vehicles from 1987-1990. It is a Gen 3 design with a pre-greased construction, a non-integral ABS sensor, and a 5-bolt hub pattern for direct replacement service.
Key Features
- Part number H513041 for rear hub and bearing replacement
- Gen 3 design for application-specific fitment
- Pre-greased assembly for ready-to-install service
- Non-integral ABS sensor configuration
- 150.5 mm outside diameter and 70.6 mm inside diameter
- 5 bolt holes with 4 flange bolt holes
Detailed Product Overview
Mevotech Supreme hub bearing assemblies are engineered in-house with upgrades tailored to the demands of higher-use passenger vehicles, SUVs, fleets, and working trucks. This H513041 assembly follows that approach with a service-focused design that supports rear wheel bearing replacement on vehicles such as the Buick LeSabre, Cadillac DeVille, and Pontiac Bonneville. The H513041 is built for applications that require a rear hub assembly with a non-integral ABS sensor and a pre-greased bearing package.
This part cross-references Timken 513041 for the same application.
Vehicle Fitment
- Fits 1988-1990 Buick LeSabre, Rear
- Fits 1988-1990 Buick Reatta, Rear
- Fits 1988-1990 Buick Riviera, Rear
- Fits 1988-1990 Cadillac Allante, Rear
- Fits 1987-1990 Cadillac DeVille, Rear
- Fits 1988-1990 Cadillac Eldorado, Rear
- Fits 1988-1990 Cadillac Seville, Rear
- Fits 1988-1990 Oldsmobile Delta 88, Rear
- Fits 1988-1990 Oldsmobile Toronado, Rear
- Fits 1988-1990 Pontiac Bonneville, Rear
Common Replacement Uses
- Rear wheel bearing noise or rough rotation
- Hub play or looseness at the rear wheel
- ABS-related service on a non-integral sensor setup
- Restoring proper rear hub support on GM full-size and luxury models
- Replacing a worn rear hub assembly on Buick, Cadillac, Oldsmobile, or Pontiac vehicles
Installation Notes
Confirm rear axle application, bolt pattern, and sensor configuration before installation. Match the part to the vehicle’s original hub dimensions and mounting points, and inspect surrounding brake and suspension components during service. Because this assembly is pre-greased, it is ready for installation once the mounting surfaces are cleaned and verified.
Quality Assurance
Mevotech Supreme parts are engineered in-house with application-specific upgrades aimed at durability and service efficiency. The Labor Saver design approach is used to simplify installation and reduce service time where the application allows.
Description
Rear Wheel Bearing Hub Assembly for GM Applications
Mevotech H513041 is a rear wheel bearing and hub assembly built for select Buick, Cadillac, Oldsmobile, and Pontiac vehicles from 1987-1990. It is a Gen 3 design with a pre-greased construction, a non-integral ABS sensor, and a 5-bolt hub pattern for direct replacement service.
Key Features
- Part number H513041 for rear hub and bearing replacement
- Gen 3 design for application-specific fitment
- Pre-greased assembly for ready-to-install service
- Non-integral ABS sensor configuration
- 150.5 mm outside diameter and 70.6 mm inside diameter
- 5 bolt holes with 4 flange bolt holes
Detailed Product Overview
Mevotech Supreme hub bearing assemblies are engineered in-house with upgrades tailored to the demands of higher-use passenger vehicles, SUVs, fleets, and working trucks. This H513041 assembly follows that approach with a service-focused design that supports rear wheel bearing replacement on vehicles such as the Buick LeSabre, Cadillac DeVille, and Pontiac Bonneville. The H513041 is built for applications that require a rear hub assembly with a non-integral ABS sensor and a pre-greased bearing package.
This part cross-references Timken 513041 for the same application.
Vehicle Fitment
- Fits 1988-1990 Buick LeSabre, Rear
- Fits 1988-1990 Buick Reatta, Rear
- Fits 1988-1990 Buick Riviera, Rear
- Fits 1988-1990 Cadillac Allante, Rear
- Fits 1987-1990 Cadillac DeVille, Rear
- Fits 1988-1990 Cadillac Eldorado, Rear
- Fits 1988-1990 Cadillac Seville, Rear
- Fits 1988-1990 Oldsmobile Delta 88, Rear
- Fits 1988-1990 Oldsmobile Toronado, Rear
- Fits 1988-1990 Pontiac Bonneville, Rear
Common Replacement Uses
- Rear wheel bearing noise or rough rotation
- Hub play or looseness at the rear wheel
- ABS-related service on a non-integral sensor setup
- Restoring proper rear hub support on GM full-size and luxury models
- Replacing a worn rear hub assembly on Buick, Cadillac, Oldsmobile, or Pontiac vehicles
Installation Notes
Confirm rear axle application, bolt pattern, and sensor configuration before installation. Match the part to the vehicle’s original hub dimensions and mounting points, and inspect surrounding brake and suspension components during service. Because this assembly is pre-greased, it is ready for installation once the mounting surfaces are cleaned and verified.
Quality Assurance
Mevotech Supreme parts are engineered in-house with application-specific upgrades aimed at durability and service efficiency. The Labor Saver design approach is used to simplify installation and reduce service time where the application allows.
