Sparta PN4082 Fuel Pump Hanger Assembly
Fuel Pump Hanger Assembly for Ford, Lincoln, and Mercury
Sparta PN4082 is a standard replacement fuel pump hanger assembly for select higher-mileage and earlier model vehicles. Built with a metal housing and an in-tank electric turbine pump, it includes the fuel sending unit, strainer, gasket/seal, and mounting hardware for a complete service replacement.
Compatible with 2006-2010 Ford Crown Victoria, 2006-2010 Lincoln Town Car, and 2006-2010 Mercury Grand Marquis, this assembly is built for gas applications with a 12-volt system and specific fitment.
Key Features
- Sparta PN4082 fuel pump hanger assembly with integrated fuel pump
- Specific fit replacement for select Ford, Lincoln, and Mercury full-size sedans
- In-tank electric turbine pump design for gas fuel systems
- Fuel sending unit included for level signal service
- Metal construction with nitrile rubber gasket/seal material
- Includes strainer, mounting hardware, and instruction sheet
- Quick-connect outlet, female connector, and 7-terminal configuration
- Operating range: 44 to 87 psi with 32.0 average flow rating
Detailed Description
Sparta PN4082 is engineered as a standard replacement fuel pump hanger assembly for vehicles that require a specific in-tank module. It uses a 12.0-volt electric turbine pump design, a 0.375-inch outlet outside diameter, and an external strainer inlet to support fuel delivery in gas-powered applications. The assembly also includes the fuel sending unit, helping restore both fuel supply and tank level reporting in one service part.
Backed by Sparta and distributed through Delphi, this part is positioned for higher-mileage and earlier model vehicles where fit and performance matter. This part cross-references Airtex Fuel Pumps E2475S and Carter P76290S for the same application. Search terms such as fuel pump hanger assembly for 2006-2010 Ford Crown Victoria, fuel pump hanger assembly for 2006-2010 Lincoln Town Car, and fuel pump hanger assembly for 2006-2010 Mercury Grand Marquis all point to this specific replacement.
What It Helps Address
- Hard starting caused by weak or failing in-tank fuel delivery
- Engine hesitation or stalling from inconsistent fuel pressure
- Inaccurate fuel level readings from a worn sending unit
- Fuel starvation under load from a deteriorated pump module
- Service issues tied to cracked seals, aged strainers, or worn hanger components
Installation Notes and Tips
Verify vehicle application before installation, since PN4082 is a specific-fit assembly. Confirm connector style, terminal count, outlet connection, and tank configuration against the original module. Replace the tank seal during service, inspect the fuel lines for wear, and follow the included instruction sheet for proper assembly alignment and electrical connection.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is aimed at replacement applications where OE-level fit and performance knowledge are important. PN4082 is built as a standard replacement fuel pump hanger assembly for confirmed vehicle applications.
Fuel Pump Hanger Assembly for Ford, Lincoln, and Mercury
Sparta PN4082 is a standard replacement fuel pump hanger assembly for select higher-mileage and earlier model vehicles. Built with a metal housing and an in-tank electric turbine pump, it includes the fuel sending unit, strainer, gasket/seal, and mounting hardware for a complete service replacement.
Compatible with 2006-2010 Ford Crown Victoria, 2006-2010 Lincoln Town Car, and 2006-2010 Mercury Grand Marquis, this assembly is built for gas applications with a 12-volt system and specific fitment.
Key Features
- Sparta PN4082 fuel pump hanger assembly with integrated fuel pump
- Specific fit replacement for select Ford, Lincoln, and Mercury full-size sedans
- In-tank electric turbine pump design for gas fuel systems
- Fuel sending unit included for level signal service
- Metal construction with nitrile rubber gasket/seal material
- Includes strainer, mounting hardware, and instruction sheet
- Quick-connect outlet, female connector, and 7-terminal configuration
- Operating range: 44 to 87 psi with 32.0 average flow rating
Detailed Description
Sparta PN4082 is engineered as a standard replacement fuel pump hanger assembly for vehicles that require a specific in-tank module. It uses a 12.0-volt electric turbine pump design, a 0.375-inch outlet outside diameter, and an external strainer inlet to support fuel delivery in gas-powered applications. The assembly also includes the fuel sending unit, helping restore both fuel supply and tank level reporting in one service part.
Backed by Sparta and distributed through Delphi, this part is positioned for higher-mileage and earlier model vehicles where fit and performance matter. This part cross-references Airtex Fuel Pumps E2475S and Carter P76290S for the same application. Search terms such as fuel pump hanger assembly for 2006-2010 Ford Crown Victoria, fuel pump hanger assembly for 2006-2010 Lincoln Town Car, and fuel pump hanger assembly for 2006-2010 Mercury Grand Marquis all point to this specific replacement.
What It Helps Address
- Hard starting caused by weak or failing in-tank fuel delivery
- Engine hesitation or stalling from inconsistent fuel pressure
- Inaccurate fuel level readings from a worn sending unit
- Fuel starvation under load from a deteriorated pump module
- Service issues tied to cracked seals, aged strainers, or worn hanger components
Installation Notes and Tips
Verify vehicle application before installation, since PN4082 is a specific-fit assembly. Confirm connector style, terminal count, outlet connection, and tank configuration against the original module. Replace the tank seal during service, inspect the fuel lines for wear, and follow the included instruction sheet for proper assembly alignment and electrical connection.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is aimed at replacement applications where OE-level fit and performance knowledge are important. PN4082 is built as a standard replacement fuel pump hanger assembly for confirmed vehicle applications.
Original: $204.52
-65%$204.52
$71.58Description
Fuel Pump Hanger Assembly for Ford, Lincoln, and Mercury
Sparta PN4082 is a standard replacement fuel pump hanger assembly for select higher-mileage and earlier model vehicles. Built with a metal housing and an in-tank electric turbine pump, it includes the fuel sending unit, strainer, gasket/seal, and mounting hardware for a complete service replacement.
Compatible with 2006-2010 Ford Crown Victoria, 2006-2010 Lincoln Town Car, and 2006-2010 Mercury Grand Marquis, this assembly is built for gas applications with a 12-volt system and specific fitment.
Key Features
- Sparta PN4082 fuel pump hanger assembly with integrated fuel pump
- Specific fit replacement for select Ford, Lincoln, and Mercury full-size sedans
- In-tank electric turbine pump design for gas fuel systems
- Fuel sending unit included for level signal service
- Metal construction with nitrile rubber gasket/seal material
- Includes strainer, mounting hardware, and instruction sheet
- Quick-connect outlet, female connector, and 7-terminal configuration
- Operating range: 44 to 87 psi with 32.0 average flow rating
Detailed Description
Sparta PN4082 is engineered as a standard replacement fuel pump hanger assembly for vehicles that require a specific in-tank module. It uses a 12.0-volt electric turbine pump design, a 0.375-inch outlet outside diameter, and an external strainer inlet to support fuel delivery in gas-powered applications. The assembly also includes the fuel sending unit, helping restore both fuel supply and tank level reporting in one service part.
Backed by Sparta and distributed through Delphi, this part is positioned for higher-mileage and earlier model vehicles where fit and performance matter. This part cross-references Airtex Fuel Pumps E2475S and Carter P76290S for the same application. Search terms such as fuel pump hanger assembly for 2006-2010 Ford Crown Victoria, fuel pump hanger assembly for 2006-2010 Lincoln Town Car, and fuel pump hanger assembly for 2006-2010 Mercury Grand Marquis all point to this specific replacement.
What It Helps Address
- Hard starting caused by weak or failing in-tank fuel delivery
- Engine hesitation or stalling from inconsistent fuel pressure
- Inaccurate fuel level readings from a worn sending unit
- Fuel starvation under load from a deteriorated pump module
- Service issues tied to cracked seals, aged strainers, or worn hanger components
Installation Notes and Tips
Verify vehicle application before installation, since PN4082 is a specific-fit assembly. Confirm connector style, terminal count, outlet connection, and tank configuration against the original module. Replace the tank seal during service, inspect the fuel lines for wear, and follow the included instruction sheet for proper assembly alignment and electrical connection.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is aimed at replacement applications where OE-level fit and performance knowledge are important. PN4082 is built as a standard replacement fuel pump hanger assembly for confirmed vehicle applications.
