Sparta PN4062 Fuel Pump Hanger Assembly
Fuel Pump Hanger Assembly for Ford Trucks
The Sparta PN4062 fuel pump hanger assembly is a specific-fit, in-tank replacement for select Ford F-150, F-250, F-250 HD, and F-350 applications from 1992-1997. Built with a metal housing and an included fuel sending unit, it is set up for gas-powered trucks that need a complete fuel delivery service part.
Backed by Delphi distribution and OE-focused engineering, this assembly is aimed at higher-mileage and earlier model vehicles where fit and performance matter. The Sparta PN4062 is a direct replacement choice for Ford F-150 fuel pump hanger assembly and Ford F-350 fuel pump hanger assembly service work.
Key Features
- Specific-fit fuel pump hanger assembly for select Ford trucks
- In-tank electric turbine pump design
- Fuel pump included with fuel sending unit
- Metal construction with nitrile rubber gasket/seal
- Includes strainer, lock ring, wire harness, retainers, seal, splices, and instruction sheet
- 12-volt gas application with quick-connect outlet
- Average flow rating: 24.0
- Operating pressure range: 45 to 70
- 4-wire, 4-terminal round connector with female connector and male terminals
Detailed Description
Sparta PN4062 is a standard replacement fuel pump hanger assembly engineered for in-tank use on select 1992-1997 Ford trucks. It includes the pump, float arm, sending unit, strainer, gasket/seal, lock ring, and harness components needed for a complete fuel tank service. The assembly uses a turbine-style electric pump and a quick-connect outlet with two outlet ports, supporting gas-fueled systems that require a 12-volt electrical setup.
This part cross-references Airtex Fuel Pumps E2059MN and Bosch 67000 for the same application. For buyers searching for a 1992-1996 Ford F-150 fuel pump hanger assembly, 1992-1996 Ford F-250 fuel pump hanger assembly, or 1992-1997 Ford F-350 fuel pump hanger assembly, PN4062 provides a focused OE-style replacement path.
What It Helps Fix
- Hard starting caused by a weak or failing in-tank fuel pump
- Fuel level reading issues from a worn sending unit
- Fuel delivery loss from a damaged hanger assembly or strainer
- Intermittent pump operation related to connector or harness wear
- Fuel pressure problems in older Ford truck fuel systems
Installation Notes and Tips
Verify tank configuration, connector style, and fitment before installation. This assembly is specific fit and is intended for the listed Ford applications only. Replace the tank seal and lock ring during service, and inspect the fuel lines, wiring, and tank interior for contamination before reassembly. Follow the included instruction sheet and confirm proper electrical polarity and fuel line routing after installation.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for earlier model and higher-mileage vehicles where accurate fit and dependable fuel system performance are important. PN4062 is a standard replacement part built for the listed Ford truck applications.
Compatible Vehicles
- Fits 1997 Ford F-250 HD, N/A
- Fits 1992-1997 Ford F-350, N/A
- Fits 1992-1996 Ford F-150, N/A
- Fits 1992-1996 Ford F-250, N/A
Fuel Pump Hanger Assembly for Ford Trucks
The Sparta PN4062 fuel pump hanger assembly is a specific-fit, in-tank replacement for select Ford F-150, F-250, F-250 HD, and F-350 applications from 1992-1997. Built with a metal housing and an included fuel sending unit, it is set up for gas-powered trucks that need a complete fuel delivery service part.
Backed by Delphi distribution and OE-focused engineering, this assembly is aimed at higher-mileage and earlier model vehicles where fit and performance matter. The Sparta PN4062 is a direct replacement choice for Ford F-150 fuel pump hanger assembly and Ford F-350 fuel pump hanger assembly service work.
Key Features
- Specific-fit fuel pump hanger assembly for select Ford trucks
- In-tank electric turbine pump design
- Fuel pump included with fuel sending unit
- Metal construction with nitrile rubber gasket/seal
- Includes strainer, lock ring, wire harness, retainers, seal, splices, and instruction sheet
- 12-volt gas application with quick-connect outlet
- Average flow rating: 24.0
- Operating pressure range: 45 to 70
- 4-wire, 4-terminal round connector with female connector and male terminals
Detailed Description
Sparta PN4062 is a standard replacement fuel pump hanger assembly engineered for in-tank use on select 1992-1997 Ford trucks. It includes the pump, float arm, sending unit, strainer, gasket/seal, lock ring, and harness components needed for a complete fuel tank service. The assembly uses a turbine-style electric pump and a quick-connect outlet with two outlet ports, supporting gas-fueled systems that require a 12-volt electrical setup.
This part cross-references Airtex Fuel Pumps E2059MN and Bosch 67000 for the same application. For buyers searching for a 1992-1996 Ford F-150 fuel pump hanger assembly, 1992-1996 Ford F-250 fuel pump hanger assembly, or 1992-1997 Ford F-350 fuel pump hanger assembly, PN4062 provides a focused OE-style replacement path.
What It Helps Fix
- Hard starting caused by a weak or failing in-tank fuel pump
- Fuel level reading issues from a worn sending unit
- Fuel delivery loss from a damaged hanger assembly or strainer
- Intermittent pump operation related to connector or harness wear
- Fuel pressure problems in older Ford truck fuel systems
Installation Notes and Tips
Verify tank configuration, connector style, and fitment before installation. This assembly is specific fit and is intended for the listed Ford applications only. Replace the tank seal and lock ring during service, and inspect the fuel lines, wiring, and tank interior for contamination before reassembly. Follow the included instruction sheet and confirm proper electrical polarity and fuel line routing after installation.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for earlier model and higher-mileage vehicles where accurate fit and dependable fuel system performance are important. PN4062 is a standard replacement part built for the listed Ford truck applications.
Compatible Vehicles
- Fits 1997 Ford F-250 HD, N/A
- Fits 1992-1997 Ford F-350, N/A
- Fits 1992-1996 Ford F-150, N/A
- Fits 1992-1996 Ford F-250, N/A
Description
Fuel Pump Hanger Assembly for Ford Trucks
The Sparta PN4062 fuel pump hanger assembly is a specific-fit, in-tank replacement for select Ford F-150, F-250, F-250 HD, and F-350 applications from 1992-1997. Built with a metal housing and an included fuel sending unit, it is set up for gas-powered trucks that need a complete fuel delivery service part.
Backed by Delphi distribution and OE-focused engineering, this assembly is aimed at higher-mileage and earlier model vehicles where fit and performance matter. The Sparta PN4062 is a direct replacement choice for Ford F-150 fuel pump hanger assembly and Ford F-350 fuel pump hanger assembly service work.
Key Features
- Specific-fit fuel pump hanger assembly for select Ford trucks
- In-tank electric turbine pump design
- Fuel pump included with fuel sending unit
- Metal construction with nitrile rubber gasket/seal
- Includes strainer, lock ring, wire harness, retainers, seal, splices, and instruction sheet
- 12-volt gas application with quick-connect outlet
- Average flow rating: 24.0
- Operating pressure range: 45 to 70
- 4-wire, 4-terminal round connector with female connector and male terminals
Detailed Description
Sparta PN4062 is a standard replacement fuel pump hanger assembly engineered for in-tank use on select 1992-1997 Ford trucks. It includes the pump, float arm, sending unit, strainer, gasket/seal, lock ring, and harness components needed for a complete fuel tank service. The assembly uses a turbine-style electric pump and a quick-connect outlet with two outlet ports, supporting gas-fueled systems that require a 12-volt electrical setup.
This part cross-references Airtex Fuel Pumps E2059MN and Bosch 67000 for the same application. For buyers searching for a 1992-1996 Ford F-150 fuel pump hanger assembly, 1992-1996 Ford F-250 fuel pump hanger assembly, or 1992-1997 Ford F-350 fuel pump hanger assembly, PN4062 provides a focused OE-style replacement path.
What It Helps Fix
- Hard starting caused by a weak or failing in-tank fuel pump
- Fuel level reading issues from a worn sending unit
- Fuel delivery loss from a damaged hanger assembly or strainer
- Intermittent pump operation related to connector or harness wear
- Fuel pressure problems in older Ford truck fuel systems
Installation Notes and Tips
Verify tank configuration, connector style, and fitment before installation. This assembly is specific fit and is intended for the listed Ford applications only. Replace the tank seal and lock ring during service, and inspect the fuel lines, wiring, and tank interior for contamination before reassembly. Follow the included instruction sheet and confirm proper electrical polarity and fuel line routing after installation.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for earlier model and higher-mileage vehicles where accurate fit and dependable fuel system performance are important. PN4062 is a standard replacement part built for the listed Ford truck applications.
Compatible Vehicles
- Fits 1997 Ford F-250 HD, N/A
- Fits 1992-1997 Ford F-350, N/A
- Fits 1992-1996 Ford F-150, N/A
- Fits 1992-1996 Ford F-250, N/A
