Sparta PN4051 Fuel Pump Hanger Assembly
Fuel Pump Hanger Assembly for GM Full-Size Sedans
The Sparta PN4051 fuel pump hanger assembly is a standard replacement for specific 1994-1996 Buick Roadmaster and Chevrolet Caprice applications. Built with a metal hanger, in-tank electric turbine pump, and included fuel sending unit, it addresses fuel delivery and level-sending needs in one assembly.
Key Features
- Specific fit fuel pump hanger assembly for select GM vehicles
- Includes fuel pump, fuel sending unit, strainer, seal, and lock ring
- In-tank electric turbine pump design
- Metal construction with quick-connect outlet
- 3-terminal, rectangle connector with male connector gender and female terminal gender
- Standard replacement grade for gas applications
- Average flow rating of 26.0 and maximum pressure of 73.0
- Compatible with 1994-1996 Buick Roadmaster and 1994-1996 Chevrolet Caprice
Detailed Description
Sparta PN4051 is a fuel pump hanger assembly engineered for specific GM full-size rear-wheel-drive vehicles, including the Buick Roadmaster and Chevrolet Caprice. It combines the pump, hanger, float arm, and sending unit into a single in-tank assembly, helping restore fuel delivery and fuel level signal performance in one service part. The unit uses a turbine-style electric pump, metal housing, and external strainer, with a nitrile rubber seal and included lock ring for service replacement.
Backed by Delphi distribution and OE-focused fuel system expertise, Sparta is positioned for higher-mileage and earlier model vehicles where correct fit and dependable fuel system operation matter. This part number, PN4051, also cross-references Airtex Fuel Pumps E3270 for the same application.
What It Helps Fix
- Hard starting caused by weak or failing in-tank fuel pump output
- Fuel starvation under load from reduced pressure or flow
- Inaccurate fuel gauge readings from a worn sending unit
- Intermittent fuel delivery from aging hanger assembly components
- Fuel system service issues on Buick Roadmaster and Chevrolet Caprice models
Installation Notes and Tips
Fits 1994-1996 Buick Roadmaster and 1994-1996 Chevrolet Caprice, in tank. Confirm connector shape, terminal count, outlet style, and tank configuration before installation. Replace the seal and lock ring during service, and verify fuel pressure and sender resistance after installation. PN4051 is a specific-fit assembly, so matching the vehicle application is important for proper operation.
Quality Assurance
Sparta fuel system components are distributed through Delphi, an OE full-line fuel supplier with application knowledge focused on fit and performance. PN4051 is a standard replacement assembly built for gas-fueled vehicles and supplied with the key service components needed for a complete hanger assembly replacement.
Fuel Pump Hanger Assembly for GM Full-Size Sedans
The Sparta PN4051 fuel pump hanger assembly is a standard replacement for specific 1994-1996 Buick Roadmaster and Chevrolet Caprice applications. Built with a metal hanger, in-tank electric turbine pump, and included fuel sending unit, it addresses fuel delivery and level-sending needs in one assembly.
Key Features
- Specific fit fuel pump hanger assembly for select GM vehicles
- Includes fuel pump, fuel sending unit, strainer, seal, and lock ring
- In-tank electric turbine pump design
- Metal construction with quick-connect outlet
- 3-terminal, rectangle connector with male connector gender and female terminal gender
- Standard replacement grade for gas applications
- Average flow rating of 26.0 and maximum pressure of 73.0
- Compatible with 1994-1996 Buick Roadmaster and 1994-1996 Chevrolet Caprice
Detailed Description
Sparta PN4051 is a fuel pump hanger assembly engineered for specific GM full-size rear-wheel-drive vehicles, including the Buick Roadmaster and Chevrolet Caprice. It combines the pump, hanger, float arm, and sending unit into a single in-tank assembly, helping restore fuel delivery and fuel level signal performance in one service part. The unit uses a turbine-style electric pump, metal housing, and external strainer, with a nitrile rubber seal and included lock ring for service replacement.
Backed by Delphi distribution and OE-focused fuel system expertise, Sparta is positioned for higher-mileage and earlier model vehicles where correct fit and dependable fuel system operation matter. This part number, PN4051, also cross-references Airtex Fuel Pumps E3270 for the same application.
What It Helps Fix
- Hard starting caused by weak or failing in-tank fuel pump output
- Fuel starvation under load from reduced pressure or flow
- Inaccurate fuel gauge readings from a worn sending unit
- Intermittent fuel delivery from aging hanger assembly components
- Fuel system service issues on Buick Roadmaster and Chevrolet Caprice models
Installation Notes and Tips
Fits 1994-1996 Buick Roadmaster and 1994-1996 Chevrolet Caprice, in tank. Confirm connector shape, terminal count, outlet style, and tank configuration before installation. Replace the seal and lock ring during service, and verify fuel pressure and sender resistance after installation. PN4051 is a specific-fit assembly, so matching the vehicle application is important for proper operation.
Quality Assurance
Sparta fuel system components are distributed through Delphi, an OE full-line fuel supplier with application knowledge focused on fit and performance. PN4051 is a standard replacement assembly built for gas-fueled vehicles and supplied with the key service components needed for a complete hanger assembly replacement.
Original: $175.44
-65%$175.44
$61.40Description
Fuel Pump Hanger Assembly for GM Full-Size Sedans
The Sparta PN4051 fuel pump hanger assembly is a standard replacement for specific 1994-1996 Buick Roadmaster and Chevrolet Caprice applications. Built with a metal hanger, in-tank electric turbine pump, and included fuel sending unit, it addresses fuel delivery and level-sending needs in one assembly.
Key Features
- Specific fit fuel pump hanger assembly for select GM vehicles
- Includes fuel pump, fuel sending unit, strainer, seal, and lock ring
- In-tank electric turbine pump design
- Metal construction with quick-connect outlet
- 3-terminal, rectangle connector with male connector gender and female terminal gender
- Standard replacement grade for gas applications
- Average flow rating of 26.0 and maximum pressure of 73.0
- Compatible with 1994-1996 Buick Roadmaster and 1994-1996 Chevrolet Caprice
Detailed Description
Sparta PN4051 is a fuel pump hanger assembly engineered for specific GM full-size rear-wheel-drive vehicles, including the Buick Roadmaster and Chevrolet Caprice. It combines the pump, hanger, float arm, and sending unit into a single in-tank assembly, helping restore fuel delivery and fuel level signal performance in one service part. The unit uses a turbine-style electric pump, metal housing, and external strainer, with a nitrile rubber seal and included lock ring for service replacement.
Backed by Delphi distribution and OE-focused fuel system expertise, Sparta is positioned for higher-mileage and earlier model vehicles where correct fit and dependable fuel system operation matter. This part number, PN4051, also cross-references Airtex Fuel Pumps E3270 for the same application.
What It Helps Fix
- Hard starting caused by weak or failing in-tank fuel pump output
- Fuel starvation under load from reduced pressure or flow
- Inaccurate fuel gauge readings from a worn sending unit
- Intermittent fuel delivery from aging hanger assembly components
- Fuel system service issues on Buick Roadmaster and Chevrolet Caprice models
Installation Notes and Tips
Fits 1994-1996 Buick Roadmaster and 1994-1996 Chevrolet Caprice, in tank. Confirm connector shape, terminal count, outlet style, and tank configuration before installation. Replace the seal and lock ring during service, and verify fuel pressure and sender resistance after installation. PN4051 is a specific-fit assembly, so matching the vehicle application is important for proper operation.
Quality Assurance
Sparta fuel system components are distributed through Delphi, an OE full-line fuel supplier with application knowledge focused on fit and performance. PN4051 is a standard replacement assembly built for gas-fueled vehicles and supplied with the key service components needed for a complete hanger assembly replacement.
