Sparta PN4050 Fuel Pump Hanger Assembly
Fuel Pump Hanger Assembly for GM SUVs
The Sparta PN4050 fuel pump hanger assembly is a specific-fit, in-tank replacement for select Chevrolet, GMC, and Oldsmobile applications. It combines the fuel pump, sending unit, strainer, seal, and lock ring in one service assembly for a direct repair on higher-mileage vehicles.
- Specific-fit fuel pump hanger assembly for gas applications
- In-tank electric turbine pump design
- Fuel sending unit included
- Metal construction with nitrile rubber seal material
- Quick-connect outlet with 3 outlet ports and 1 inlet
- Strainer, gasket/seal, and lock ring included
- Standard replacement grade for select Chevrolet S10 Blazer, GMC S15 Jimmy, and Oldsmobile Bravada applications
Detailed Product Overview
Sparta PN4050 is built for select GM trucks and SUVs that use an in-tank fuel pump hanger assembly. It is distributed by Delphi, an OE fuel system supplier, and is aimed at earlier model, higher-mileage vehicles where restoring fuel delivery and sender accuracy matters. This assembly uses a 13.5-volt electric turbine pump with a 26.0 average flow rating, 12 to 29 psi operating range, and a 4.0 amp average current draw. The fuel sending unit is integrated, with resistance values of 1.0 ohm empty and 90.0 ohms full.
This part cross-references Dorman - OE Solutions 692-005 for the same application. PN4050 is a direct replacement choice for 1985-1991 Chevrolet S10 Blazer, 1985-1991 GMC S15 Jimmy, and 1991 Oldsmobile Bravada service needs. Use PN4050 when replacing a worn fuel pump hanger assembly on these GM platforms, including Chevrolet S10 Blazer and GMC S15 Jimmy fuel system repairs.
Common Repair Uses
- Hard starting caused by weak fuel pressure
- Fuel level gauge errors from a worn sending unit
- Intermittent fuel delivery from a failing in-tank pump
- Fuel leaks at the hanger seal or tank interface
- Noisy or inconsistent pump operation in older GM SUVs
Installation Notes
Verify tank access, connector shape, outlet style, and fitment before installation. This assembly uses a female oval connector, pin terminals, and quick-connect outlet fittings. The package includes the fuel pump hanger assembly with float arm, seal, lock ring, and instruction sheet; mounting hardware is not included. Replace the tank seal and inspect the fuel lines and electrical connector during service for a complete repair.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier with application knowledge focused on fit and fuel system performance for earlier model vehicles. PN4050 is a standard replacement fuel pump hanger assembly built for specific-fit service on confirmed GM applications.
Fuel Pump Hanger Assembly for GM SUVs
The Sparta PN4050 fuel pump hanger assembly is a specific-fit, in-tank replacement for select Chevrolet, GMC, and Oldsmobile applications. It combines the fuel pump, sending unit, strainer, seal, and lock ring in one service assembly for a direct repair on higher-mileage vehicles.
- Specific-fit fuel pump hanger assembly for gas applications
- In-tank electric turbine pump design
- Fuel sending unit included
- Metal construction with nitrile rubber seal material
- Quick-connect outlet with 3 outlet ports and 1 inlet
- Strainer, gasket/seal, and lock ring included
- Standard replacement grade for select Chevrolet S10 Blazer, GMC S15 Jimmy, and Oldsmobile Bravada applications
Detailed Product Overview
Sparta PN4050 is built for select GM trucks and SUVs that use an in-tank fuel pump hanger assembly. It is distributed by Delphi, an OE fuel system supplier, and is aimed at earlier model, higher-mileage vehicles where restoring fuel delivery and sender accuracy matters. This assembly uses a 13.5-volt electric turbine pump with a 26.0 average flow rating, 12 to 29 psi operating range, and a 4.0 amp average current draw. The fuel sending unit is integrated, with resistance values of 1.0 ohm empty and 90.0 ohms full.
This part cross-references Dorman - OE Solutions 692-005 for the same application. PN4050 is a direct replacement choice for 1985-1991 Chevrolet S10 Blazer, 1985-1991 GMC S15 Jimmy, and 1991 Oldsmobile Bravada service needs. Use PN4050 when replacing a worn fuel pump hanger assembly on these GM platforms, including Chevrolet S10 Blazer and GMC S15 Jimmy fuel system repairs.
Common Repair Uses
- Hard starting caused by weak fuel pressure
- Fuel level gauge errors from a worn sending unit
- Intermittent fuel delivery from a failing in-tank pump
- Fuel leaks at the hanger seal or tank interface
- Noisy or inconsistent pump operation in older GM SUVs
Installation Notes
Verify tank access, connector shape, outlet style, and fitment before installation. This assembly uses a female oval connector, pin terminals, and quick-connect outlet fittings. The package includes the fuel pump hanger assembly with float arm, seal, lock ring, and instruction sheet; mounting hardware is not included. Replace the tank seal and inspect the fuel lines and electrical connector during service for a complete repair.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier with application knowledge focused on fit and fuel system performance for earlier model vehicles. PN4050 is a standard replacement fuel pump hanger assembly built for specific-fit service on confirmed GM applications.
Original: $247.43
-65%$247.43
$86.60Description
Fuel Pump Hanger Assembly for GM SUVs
The Sparta PN4050 fuel pump hanger assembly is a specific-fit, in-tank replacement for select Chevrolet, GMC, and Oldsmobile applications. It combines the fuel pump, sending unit, strainer, seal, and lock ring in one service assembly for a direct repair on higher-mileage vehicles.
- Specific-fit fuel pump hanger assembly for gas applications
- In-tank electric turbine pump design
- Fuel sending unit included
- Metal construction with nitrile rubber seal material
- Quick-connect outlet with 3 outlet ports and 1 inlet
- Strainer, gasket/seal, and lock ring included
- Standard replacement grade for select Chevrolet S10 Blazer, GMC S15 Jimmy, and Oldsmobile Bravada applications
Detailed Product Overview
Sparta PN4050 is built for select GM trucks and SUVs that use an in-tank fuel pump hanger assembly. It is distributed by Delphi, an OE fuel system supplier, and is aimed at earlier model, higher-mileage vehicles where restoring fuel delivery and sender accuracy matters. This assembly uses a 13.5-volt electric turbine pump with a 26.0 average flow rating, 12 to 29 psi operating range, and a 4.0 amp average current draw. The fuel sending unit is integrated, with resistance values of 1.0 ohm empty and 90.0 ohms full.
This part cross-references Dorman - OE Solutions 692-005 for the same application. PN4050 is a direct replacement choice for 1985-1991 Chevrolet S10 Blazer, 1985-1991 GMC S15 Jimmy, and 1991 Oldsmobile Bravada service needs. Use PN4050 when replacing a worn fuel pump hanger assembly on these GM platforms, including Chevrolet S10 Blazer and GMC S15 Jimmy fuel system repairs.
Common Repair Uses
- Hard starting caused by weak fuel pressure
- Fuel level gauge errors from a worn sending unit
- Intermittent fuel delivery from a failing in-tank pump
- Fuel leaks at the hanger seal or tank interface
- Noisy or inconsistent pump operation in older GM SUVs
Installation Notes
Verify tank access, connector shape, outlet style, and fitment before installation. This assembly uses a female oval connector, pin terminals, and quick-connect outlet fittings. The package includes the fuel pump hanger assembly with float arm, seal, lock ring, and instruction sheet; mounting hardware is not included. Replace the tank seal and inspect the fuel lines and electrical connector during service for a complete repair.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier with application knowledge focused on fit and fuel system performance for earlier model vehicles. PN4050 is a standard replacement fuel pump hanger assembly built for specific-fit service on confirmed GM applications.
