Sparta PN4036 Fuel Pump Hanger Assembly
Fuel Pump Hanger Assembly for 1997 Ford, Lincoln, and Mercury
The Sparta PN4036 fuel pump hanger assembly is a standard replacement for select 1997 Ford Crown Victoria, Lincoln Town Car, and Mercury Grand Marquis applications. Built with a metal housing and an in-tank electric turbine pump, it includes the fuel sending unit, strainer, gasket, seal, and mounting hardware for a direct-fit service replacement.
Key Features
- Specific-fit fuel pump hanger assembly for select 1997 full-size Ford, Lincoln, and Mercury sedans
- Includes fuel pump, fuel sending unit, float arm, strainer, gasket, seal, and installation hardware
- 12-volt electric turbine pump with 26.0 average flow rating and 44-73 psi pressure range
- Metal construction with round female connector and 7-pin male terminals
- In-tank design with quick-connect outlet and external strainer
- Fuel level sender resistance: 16.0 ohms empty, 160.0 ohms full
- Sparta PN4036 is distributed by Delphi, an OE full-line fuel supplier
Detailed Description
Sparta PN4036 is a fuel pump hanger assembly engineered for gasoline applications and specific vehicle fitment. It is built for 1997 Ford Crown Victoria, 1997 Lincoln Town Car, and 1997 Mercury Grand Marquis models, making it a direct replacement option for owners servicing the fuel delivery system on these vehicles. The assembly uses an in-tank electric turbine pump, a quick-connect outlet, and a metal hanger design to support consistent fuel delivery and accurate fuel level reporting through the included sending unit.
This part cross-references Airtex E2222S and DENSO 951-0008 for the same application. Sparta, distributed by Delphi, is positioned for higher-mileage and earlier-model vehicles where OE-style fit and performance matter. PN4036 is a practical choice when replacing a worn fuel pump hanger assembly on a 1997 Ford Crown Victoria, Lincoln Town Car, or Mercury Grand Marquis.
What It Is Used For
- Restoring fuel pressure on a vehicle with a weak or failed in-tank pump
- Correcting inaccurate fuel gauge readings caused by a worn sender
- Replacing a leaking or deteriorated hanger assembly seal
- Addressing hard-start, stall, or no-start conditions tied to fuel delivery
- Servicing a noisy or low-output fuel pump assembly
Installation Notes and Tips
PN4036 is a specific-fit assembly for in-tank installation. Confirm connector style, outlet configuration, and fuel tank service access before installation. Replace the seal during service, verify all electrical connections are fully seated, and inspect the fuel system for contamination before returning the vehicle to operation. Use the included instruction sheet for assembly details and torque guidance.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier with application knowledge focused on fit and performance for earlier-model, higher-mileage vehicles. PN4036 is a standard replacement fuel pump hanger assembly built to match the listed application requirements.
Fuel Pump Hanger Assembly for 1997 Ford, Lincoln, and Mercury
The Sparta PN4036 fuel pump hanger assembly is a standard replacement for select 1997 Ford Crown Victoria, Lincoln Town Car, and Mercury Grand Marquis applications. Built with a metal housing and an in-tank electric turbine pump, it includes the fuel sending unit, strainer, gasket, seal, and mounting hardware for a direct-fit service replacement.
Key Features
- Specific-fit fuel pump hanger assembly for select 1997 full-size Ford, Lincoln, and Mercury sedans
- Includes fuel pump, fuel sending unit, float arm, strainer, gasket, seal, and installation hardware
- 12-volt electric turbine pump with 26.0 average flow rating and 44-73 psi pressure range
- Metal construction with round female connector and 7-pin male terminals
- In-tank design with quick-connect outlet and external strainer
- Fuel level sender resistance: 16.0 ohms empty, 160.0 ohms full
- Sparta PN4036 is distributed by Delphi, an OE full-line fuel supplier
Detailed Description
Sparta PN4036 is a fuel pump hanger assembly engineered for gasoline applications and specific vehicle fitment. It is built for 1997 Ford Crown Victoria, 1997 Lincoln Town Car, and 1997 Mercury Grand Marquis models, making it a direct replacement option for owners servicing the fuel delivery system on these vehicles. The assembly uses an in-tank electric turbine pump, a quick-connect outlet, and a metal hanger design to support consistent fuel delivery and accurate fuel level reporting through the included sending unit.
This part cross-references Airtex E2222S and DENSO 951-0008 for the same application. Sparta, distributed by Delphi, is positioned for higher-mileage and earlier-model vehicles where OE-style fit and performance matter. PN4036 is a practical choice when replacing a worn fuel pump hanger assembly on a 1997 Ford Crown Victoria, Lincoln Town Car, or Mercury Grand Marquis.
What It Is Used For
- Restoring fuel pressure on a vehicle with a weak or failed in-tank pump
- Correcting inaccurate fuel gauge readings caused by a worn sender
- Replacing a leaking or deteriorated hanger assembly seal
- Addressing hard-start, stall, or no-start conditions tied to fuel delivery
- Servicing a noisy or low-output fuel pump assembly
Installation Notes and Tips
PN4036 is a specific-fit assembly for in-tank installation. Confirm connector style, outlet configuration, and fuel tank service access before installation. Replace the seal during service, verify all electrical connections are fully seated, and inspect the fuel system for contamination before returning the vehicle to operation. Use the included instruction sheet for assembly details and torque guidance.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier with application knowledge focused on fit and performance for earlier-model, higher-mileage vehicles. PN4036 is a standard replacement fuel pump hanger assembly built to match the listed application requirements.
Original: $174.51
-65%$174.51
$61.08Description
Fuel Pump Hanger Assembly for 1997 Ford, Lincoln, and Mercury
The Sparta PN4036 fuel pump hanger assembly is a standard replacement for select 1997 Ford Crown Victoria, Lincoln Town Car, and Mercury Grand Marquis applications. Built with a metal housing and an in-tank electric turbine pump, it includes the fuel sending unit, strainer, gasket, seal, and mounting hardware for a direct-fit service replacement.
Key Features
- Specific-fit fuel pump hanger assembly for select 1997 full-size Ford, Lincoln, and Mercury sedans
- Includes fuel pump, fuel sending unit, float arm, strainer, gasket, seal, and installation hardware
- 12-volt electric turbine pump with 26.0 average flow rating and 44-73 psi pressure range
- Metal construction with round female connector and 7-pin male terminals
- In-tank design with quick-connect outlet and external strainer
- Fuel level sender resistance: 16.0 ohms empty, 160.0 ohms full
- Sparta PN4036 is distributed by Delphi, an OE full-line fuel supplier
Detailed Description
Sparta PN4036 is a fuel pump hanger assembly engineered for gasoline applications and specific vehicle fitment. It is built for 1997 Ford Crown Victoria, 1997 Lincoln Town Car, and 1997 Mercury Grand Marquis models, making it a direct replacement option for owners servicing the fuel delivery system on these vehicles. The assembly uses an in-tank electric turbine pump, a quick-connect outlet, and a metal hanger design to support consistent fuel delivery and accurate fuel level reporting through the included sending unit.
This part cross-references Airtex E2222S and DENSO 951-0008 for the same application. Sparta, distributed by Delphi, is positioned for higher-mileage and earlier-model vehicles where OE-style fit and performance matter. PN4036 is a practical choice when replacing a worn fuel pump hanger assembly on a 1997 Ford Crown Victoria, Lincoln Town Car, or Mercury Grand Marquis.
What It Is Used For
- Restoring fuel pressure on a vehicle with a weak or failed in-tank pump
- Correcting inaccurate fuel gauge readings caused by a worn sender
- Replacing a leaking or deteriorated hanger assembly seal
- Addressing hard-start, stall, or no-start conditions tied to fuel delivery
- Servicing a noisy or low-output fuel pump assembly
Installation Notes and Tips
PN4036 is a specific-fit assembly for in-tank installation. Confirm connector style, outlet configuration, and fuel tank service access before installation. Replace the seal during service, verify all electrical connections are fully seated, and inspect the fuel system for contamination before returning the vehicle to operation. Use the included instruction sheet for assembly details and torque guidance.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier with application knowledge focused on fit and performance for earlier-model, higher-mileage vehicles. PN4036 is a standard replacement fuel pump hanger assembly built to match the listed application requirements.
