Sparta PN4030 Fuel Pump Hanger Assembly
Fuel Pump Hanger Assembly for Bronco II
The Sparta PN4030 fuel pump hanger assembly is a specific-fit replacement for select 1986-1988 Ford Bronco II applications. Built with a metal housing and an electric in-tank turbine pump, it includes the fuel sending unit, strainer, gasket, seal, lock ring, and float arm for a complete service replacement.
Key Features
- Specific-fit fuel pump hanger assembly for 1986-1988 Ford Bronco II
- In-tank electric turbine pump with 12V operation
- Average flow rating of 29.0 and pressure range of 5 to 6.5
- Fuel sending unit included with 70 ohms empty and 10 ohms full resistance
- Metal construction with nitrile rubber gasket/seal material
- Quick-connect outlet design with female connector and male pin terminals
- Includes strainer, seal, lock ring, and instruction sheet
- Sparta PN4030 is distributed by Delphi, an OE full-line fuel supplier
Detailed Description
Sparta PN4030 is a standard replacement fuel pump hanger assembly engineered for higher-mileage and earlier-model vehicles. It is built for gas applications and uses an in-tank electric turbine pump design with a 7.0 average current draw, 4-terminal electrical connection, and oval connector shape. The assembly includes the fuel pump, fuel sending unit, float arm, external strainer, gasket, and lock ring, making it a practical service part for restoring fuel delivery and fuel level reporting on the Ford Bronco II.
This part cross-references Airtex Fuel Pumps E2097S and Carter P74069 for the same application. For buyers searching for a Ford Bronco II fuel pump hanger assembly, fuel sending unit replacement, or in-tank fuel pump assembly, PN4030 provides a direct-fit solution for the listed vehicles.
What This Part Helps Address
- Hard starting caused by weak or failing fuel pump output
- Inconsistent fuel delivery under load
- Incorrect fuel gauge readings from a worn sending unit
- Fuel starvation from a clogged or deteriorated strainer
- Noise or performance issues from an aging in-tank pump assembly
Installation Notes and Tips
Install PN4030 in the fuel tank using the included lock ring and seal. Verify the connector shape, terminal count, outlet type, and outlet diameter before installation, and confirm the vehicle uses the specified in-tank gas fuel system. Because this is a specific-fit assembly, compare the original hanger layout and electrical connection to the replacement before final assembly.
Compatible With 1986-1988 Ford Bronco II. Search terms such as Ford Bronco II fuel pump hanger assembly, 1986 Ford Bronco II fuel sending unit, and 1988 Ford Bronco II in-tank fuel pump all point to this application.
Quality Assurance
Sparta is distributed by Delphi, the OE full-line fuel supplier, and is positioned for earlier model and higher-mileage vehicle service. PN4030 is a standard replacement part built to OE-focused fit and performance expectations for the listed Bronco II applications.
Fuel Pump Hanger Assembly for Bronco II
The Sparta PN4030 fuel pump hanger assembly is a specific-fit replacement for select 1986-1988 Ford Bronco II applications. Built with a metal housing and an electric in-tank turbine pump, it includes the fuel sending unit, strainer, gasket, seal, lock ring, and float arm for a complete service replacement.
Key Features
- Specific-fit fuel pump hanger assembly for 1986-1988 Ford Bronco II
- In-tank electric turbine pump with 12V operation
- Average flow rating of 29.0 and pressure range of 5 to 6.5
- Fuel sending unit included with 70 ohms empty and 10 ohms full resistance
- Metal construction with nitrile rubber gasket/seal material
- Quick-connect outlet design with female connector and male pin terminals
- Includes strainer, seal, lock ring, and instruction sheet
- Sparta PN4030 is distributed by Delphi, an OE full-line fuel supplier
Detailed Description
Sparta PN4030 is a standard replacement fuel pump hanger assembly engineered for higher-mileage and earlier-model vehicles. It is built for gas applications and uses an in-tank electric turbine pump design with a 7.0 average current draw, 4-terminal electrical connection, and oval connector shape. The assembly includes the fuel pump, fuel sending unit, float arm, external strainer, gasket, and lock ring, making it a practical service part for restoring fuel delivery and fuel level reporting on the Ford Bronco II.
This part cross-references Airtex Fuel Pumps E2097S and Carter P74069 for the same application. For buyers searching for a Ford Bronco II fuel pump hanger assembly, fuel sending unit replacement, or in-tank fuel pump assembly, PN4030 provides a direct-fit solution for the listed vehicles.
What This Part Helps Address
- Hard starting caused by weak or failing fuel pump output
- Inconsistent fuel delivery under load
- Incorrect fuel gauge readings from a worn sending unit
- Fuel starvation from a clogged or deteriorated strainer
- Noise or performance issues from an aging in-tank pump assembly
Installation Notes and Tips
Install PN4030 in the fuel tank using the included lock ring and seal. Verify the connector shape, terminal count, outlet type, and outlet diameter before installation, and confirm the vehicle uses the specified in-tank gas fuel system. Because this is a specific-fit assembly, compare the original hanger layout and electrical connection to the replacement before final assembly.
Compatible With 1986-1988 Ford Bronco II. Search terms such as Ford Bronco II fuel pump hanger assembly, 1986 Ford Bronco II fuel sending unit, and 1988 Ford Bronco II in-tank fuel pump all point to this application.
Quality Assurance
Sparta is distributed by Delphi, the OE full-line fuel supplier, and is positioned for earlier model and higher-mileage vehicle service. PN4030 is a standard replacement part built to OE-focused fit and performance expectations for the listed Bronco II applications.
Original: $119.78
-65%$119.78
$41.92Description
Fuel Pump Hanger Assembly for Bronco II
The Sparta PN4030 fuel pump hanger assembly is a specific-fit replacement for select 1986-1988 Ford Bronco II applications. Built with a metal housing and an electric in-tank turbine pump, it includes the fuel sending unit, strainer, gasket, seal, lock ring, and float arm for a complete service replacement.
Key Features
- Specific-fit fuel pump hanger assembly for 1986-1988 Ford Bronco II
- In-tank electric turbine pump with 12V operation
- Average flow rating of 29.0 and pressure range of 5 to 6.5
- Fuel sending unit included with 70 ohms empty and 10 ohms full resistance
- Metal construction with nitrile rubber gasket/seal material
- Quick-connect outlet design with female connector and male pin terminals
- Includes strainer, seal, lock ring, and instruction sheet
- Sparta PN4030 is distributed by Delphi, an OE full-line fuel supplier
Detailed Description
Sparta PN4030 is a standard replacement fuel pump hanger assembly engineered for higher-mileage and earlier-model vehicles. It is built for gas applications and uses an in-tank electric turbine pump design with a 7.0 average current draw, 4-terminal electrical connection, and oval connector shape. The assembly includes the fuel pump, fuel sending unit, float arm, external strainer, gasket, and lock ring, making it a practical service part for restoring fuel delivery and fuel level reporting on the Ford Bronco II.
This part cross-references Airtex Fuel Pumps E2097S and Carter P74069 for the same application. For buyers searching for a Ford Bronco II fuel pump hanger assembly, fuel sending unit replacement, or in-tank fuel pump assembly, PN4030 provides a direct-fit solution for the listed vehicles.
What This Part Helps Address
- Hard starting caused by weak or failing fuel pump output
- Inconsistent fuel delivery under load
- Incorrect fuel gauge readings from a worn sending unit
- Fuel starvation from a clogged or deteriorated strainer
- Noise or performance issues from an aging in-tank pump assembly
Installation Notes and Tips
Install PN4030 in the fuel tank using the included lock ring and seal. Verify the connector shape, terminal count, outlet type, and outlet diameter before installation, and confirm the vehicle uses the specified in-tank gas fuel system. Because this is a specific-fit assembly, compare the original hanger layout and electrical connection to the replacement before final assembly.
Compatible With 1986-1988 Ford Bronco II. Search terms such as Ford Bronco II fuel pump hanger assembly, 1986 Ford Bronco II fuel sending unit, and 1988 Ford Bronco II in-tank fuel pump all point to this application.
Quality Assurance
Sparta is distributed by Delphi, the OE full-line fuel supplier, and is positioned for earlier model and higher-mileage vehicle service. PN4030 is a standard replacement part built to OE-focused fit and performance expectations for the listed Bronco II applications.
