Sparta PN3143 Fuel Pump Module Assembly
Fuel Pump Module Assembly for Ford E-Series Vans
Sparta PN3143 is a specific-fit in-tank fuel pump module assembly for select 1992-1996 Ford E-150 Econoline, E-150 Econoline Club Wagon, E-250 Econoline, E-350 Econoline, and E-350 Econoline Club Wagon applications. Built as a standard replacement for gas-powered vehicles, it includes the fuel sending unit, strainer, seal, clips, splice kit, wire harness, and instruction sheet.
- Specific fit fuel pump module assembly for select Ford E-Series vans
- In-tank electric turbine pump design
- 12-volt gas application with 44-97 psi operating range
- Fuel sending unit included for accurate fuel level reporting
- Strainer, gasket/seal, wire harness, clips, and splice kit included
- Quick-connect outlet with 3 outlets and 0.375 in. outlet outside diameter
- Plastic housing with nitrile rubber seal material
- 4-wire, 4-terminal design with round female connector
Detailed Product Overview
Sparta PN3143 is engineered for higher-mileage and earlier-model vehicles, drawing on OE fuel system expertise from Delphi distribution. This fuel pump module assembly uses an electric turbine pump and is designed for in-tank installation on gas applications. It delivers a 34 average flow rating and 6-amp average current draw, with a maximum pressure of 97 and minimum pressure of 44 for consistent fuel delivery in the intended applications. The included fuel sending unit, external strainer, and quick-connect outlet help support a complete replacement on compatible Ford E-150 Econoline and E-350 Econoline platforms. This part cross-references Bosch 67000 and Carter P74107 for the same application.
Common Repair Applications
- Hard starting caused by a weak or failing fuel pump
- Fuel starvation under load or at higher demand
- Inaccurate fuel gauge readings from a worn sending unit
- Fuel pressure loss from an aging in-tank module
- Noise or inconsistent operation from a deteriorated pump assembly
Installation Notes and Tips
Verify the vehicle’s year, model, and fuel system configuration before installation. This module is a specific-fit in-tank assembly and uses a round female connector with 4 wires and 4 terminals. The package includes the seal, clips, splice kit, wire harness, and instruction sheet, but does not include mounting hardware or a lock ring. Confirm the quick-connect outlet connection and outlet diameter match the original setup before assembly.
Quality Assurance
Sparta fuel system parts are backed by Delphi distribution, an OE fuel supplier with application knowledge focused on fit and performance for earlier-model, higher-mileage vehicles. PN3143 is built as a standard replacement fuel pump module assembly for the listed Ford E-Series applications.
Compatible Vehicles
- Fits 1992-1996 Ford E-150 Econoline, N/A
- Fits 1992-1996 Ford E-150 Econoline Club Wagon, N/A
- Fits 1992-1996 Ford E-250 Econoline, N/A
- Fits 1992-1996 Ford E-350 Econoline, N/A
- Fits 1992-1996 Ford E-350 Econoline Club Wagon, N/A
Fuel Pump Module Assembly for Ford E-Series Vans
Sparta PN3143 is a specific-fit in-tank fuel pump module assembly for select 1992-1996 Ford E-150 Econoline, E-150 Econoline Club Wagon, E-250 Econoline, E-350 Econoline, and E-350 Econoline Club Wagon applications. Built as a standard replacement for gas-powered vehicles, it includes the fuel sending unit, strainer, seal, clips, splice kit, wire harness, and instruction sheet.
- Specific fit fuel pump module assembly for select Ford E-Series vans
- In-tank electric turbine pump design
- 12-volt gas application with 44-97 psi operating range
- Fuel sending unit included for accurate fuel level reporting
- Strainer, gasket/seal, wire harness, clips, and splice kit included
- Quick-connect outlet with 3 outlets and 0.375 in. outlet outside diameter
- Plastic housing with nitrile rubber seal material
- 4-wire, 4-terminal design with round female connector
Detailed Product Overview
Sparta PN3143 is engineered for higher-mileage and earlier-model vehicles, drawing on OE fuel system expertise from Delphi distribution. This fuel pump module assembly uses an electric turbine pump and is designed for in-tank installation on gas applications. It delivers a 34 average flow rating and 6-amp average current draw, with a maximum pressure of 97 and minimum pressure of 44 for consistent fuel delivery in the intended applications. The included fuel sending unit, external strainer, and quick-connect outlet help support a complete replacement on compatible Ford E-150 Econoline and E-350 Econoline platforms. This part cross-references Bosch 67000 and Carter P74107 for the same application.
Common Repair Applications
- Hard starting caused by a weak or failing fuel pump
- Fuel starvation under load or at higher demand
- Inaccurate fuel gauge readings from a worn sending unit
- Fuel pressure loss from an aging in-tank module
- Noise or inconsistent operation from a deteriorated pump assembly
Installation Notes and Tips
Verify the vehicle’s year, model, and fuel system configuration before installation. This module is a specific-fit in-tank assembly and uses a round female connector with 4 wires and 4 terminals. The package includes the seal, clips, splice kit, wire harness, and instruction sheet, but does not include mounting hardware or a lock ring. Confirm the quick-connect outlet connection and outlet diameter match the original setup before assembly.
Quality Assurance
Sparta fuel system parts are backed by Delphi distribution, an OE fuel supplier with application knowledge focused on fit and performance for earlier-model, higher-mileage vehicles. PN3143 is built as a standard replacement fuel pump module assembly for the listed Ford E-Series applications.
Compatible Vehicles
- Fits 1992-1996 Ford E-150 Econoline, N/A
- Fits 1992-1996 Ford E-150 Econoline Club Wagon, N/A
- Fits 1992-1996 Ford E-250 Econoline, N/A
- Fits 1992-1996 Ford E-350 Econoline, N/A
- Fits 1992-1996 Ford E-350 Econoline Club Wagon, N/A
Description
Fuel Pump Module Assembly for Ford E-Series Vans
Sparta PN3143 is a specific-fit in-tank fuel pump module assembly for select 1992-1996 Ford E-150 Econoline, E-150 Econoline Club Wagon, E-250 Econoline, E-350 Econoline, and E-350 Econoline Club Wagon applications. Built as a standard replacement for gas-powered vehicles, it includes the fuel sending unit, strainer, seal, clips, splice kit, wire harness, and instruction sheet.
- Specific fit fuel pump module assembly for select Ford E-Series vans
- In-tank electric turbine pump design
- 12-volt gas application with 44-97 psi operating range
- Fuel sending unit included for accurate fuel level reporting
- Strainer, gasket/seal, wire harness, clips, and splice kit included
- Quick-connect outlet with 3 outlets and 0.375 in. outlet outside diameter
- Plastic housing with nitrile rubber seal material
- 4-wire, 4-terminal design with round female connector
Detailed Product Overview
Sparta PN3143 is engineered for higher-mileage and earlier-model vehicles, drawing on OE fuel system expertise from Delphi distribution. This fuel pump module assembly uses an electric turbine pump and is designed for in-tank installation on gas applications. It delivers a 34 average flow rating and 6-amp average current draw, with a maximum pressure of 97 and minimum pressure of 44 for consistent fuel delivery in the intended applications. The included fuel sending unit, external strainer, and quick-connect outlet help support a complete replacement on compatible Ford E-150 Econoline and E-350 Econoline platforms. This part cross-references Bosch 67000 and Carter P74107 for the same application.
Common Repair Applications
- Hard starting caused by a weak or failing fuel pump
- Fuel starvation under load or at higher demand
- Inaccurate fuel gauge readings from a worn sending unit
- Fuel pressure loss from an aging in-tank module
- Noise or inconsistent operation from a deteriorated pump assembly
Installation Notes and Tips
Verify the vehicle’s year, model, and fuel system configuration before installation. This module is a specific-fit in-tank assembly and uses a round female connector with 4 wires and 4 terminals. The package includes the seal, clips, splice kit, wire harness, and instruction sheet, but does not include mounting hardware or a lock ring. Confirm the quick-connect outlet connection and outlet diameter match the original setup before assembly.
Quality Assurance
Sparta fuel system parts are backed by Delphi distribution, an OE fuel supplier with application knowledge focused on fit and performance for earlier-model, higher-mileage vehicles. PN3143 is built as a standard replacement fuel pump module assembly for the listed Ford E-Series applications.
Compatible Vehicles
- Fits 1992-1996 Ford E-150 Econoline, N/A
- Fits 1992-1996 Ford E-150 Econoline Club Wagon, N/A
- Fits 1992-1996 Ford E-250 Econoline, N/A
- Fits 1992-1996 Ford E-350 Econoline, N/A
- Fits 1992-1996 Ford E-350 Econoline Club Wagon, N/A
