Sparta PN3127 Fuel Pump Module Assembly
Fuel Pump Module Assembly for Chrysler and Dodge
Sparta PN3127 is a standard replacement fuel pump module assembly for specific Chrysler and Dodge applications. It includes the fuel sending unit, regulator, strainer, fuel filter, gasket/seal, and float arm for a complete in-tank service solution.
Compatible with 2011-2014 Chrysler 200, 2008-2014 Dodge Avenger, and 2007-2010 Chrysler Sebring, this Sparta fuel pump module assembly is built for gas-powered vehicles that need a direct-fit replacement. The PN3127 assembly uses a 12-volt electric turbine pump with a quick-connect outlet and a single female connector.
Key Features
- Sparta PN3127 fuel pump module assembly for specific Chrysler and Dodge fitments
- In-tank electric turbine pump design
- Includes fuel sending unit, regulator, strainer, fuel filter, gasket/seal, and float arm
- 12V operation with 1 connector, 4 terminals, and female connector shape
- Quick-connect outlet with 0.375 in. outside diameter
- Standard replacement grade for gas applications
- Plastic housing with nitrile rubber seal material
- Maximum pressure rating of 62 psi and average flow rating of 20
Detailed Description
Sparta PN3127 is an in-tank fuel pump module assembly engineered for specific Chrysler 200, Dodge Avenger, and Chrysler Sebring applications. It is designed for gas fuel systems and includes the fuel sending unit, regulator, internal strainer, fuel filter, and seal to support a complete replacement of the fuel delivery module. The turbine-style electric pump operates at 12 volts and uses a quick-connect outlet for straightforward fuel line connection.
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for higher-mileage and earlier-model vehicles where correct fit and dependable fuel delivery matter. This part cross-references Mopar 68004475AE and Carter P76509M for the same application. Search terms such as Chrysler 200 fuel pump module assembly, Dodge Avenger in-tank fuel pump, and Chrysler Sebring fuel sending unit replacement all point to this direct-fit part number PN3127.
Common Repair Symptoms
- Hard starting or extended crank time
- Engine stalling from inconsistent fuel delivery
- Fuel gauge reading incorrectly due to sender issues
- Low fuel pressure or pressure that falls outside specification
- Poor drivability caused by a failing in-tank pump module
Installation Notes and Tips
Verify vehicle fitment by year, make, and model before installation. This module is specific fit and uses a trapezoid female connector with a pin-style terminal design, so connector matching is important during replacement. The package includes the module assembly, float arm, seal, and instruction sheet; mounting hardware and lock ring are not included.
Because this is an in-tank fuel system component, clean the tank area before removal and inspect the fuel lines, electrical connector, and tank sealing surface during service. Confirm the outlet type, connector quantity, and fuel line routing before final assembly.
Quality Assurance
Sparta fuel system parts are backed by Delphi’s OE fuel expertise, with product selection focused on fit and performance for the listed applications. PN3127 is a standard replacement module built for the confirmed Chrysler and Dodge fitments shown above.
Fuel Pump Module Assembly for Chrysler and Dodge
Sparta PN3127 is a standard replacement fuel pump module assembly for specific Chrysler and Dodge applications. It includes the fuel sending unit, regulator, strainer, fuel filter, gasket/seal, and float arm for a complete in-tank service solution.
Compatible with 2011-2014 Chrysler 200, 2008-2014 Dodge Avenger, and 2007-2010 Chrysler Sebring, this Sparta fuel pump module assembly is built for gas-powered vehicles that need a direct-fit replacement. The PN3127 assembly uses a 12-volt electric turbine pump with a quick-connect outlet and a single female connector.
Key Features
- Sparta PN3127 fuel pump module assembly for specific Chrysler and Dodge fitments
- In-tank electric turbine pump design
- Includes fuel sending unit, regulator, strainer, fuel filter, gasket/seal, and float arm
- 12V operation with 1 connector, 4 terminals, and female connector shape
- Quick-connect outlet with 0.375 in. outside diameter
- Standard replacement grade for gas applications
- Plastic housing with nitrile rubber seal material
- Maximum pressure rating of 62 psi and average flow rating of 20
Detailed Description
Sparta PN3127 is an in-tank fuel pump module assembly engineered for specific Chrysler 200, Dodge Avenger, and Chrysler Sebring applications. It is designed for gas fuel systems and includes the fuel sending unit, regulator, internal strainer, fuel filter, and seal to support a complete replacement of the fuel delivery module. The turbine-style electric pump operates at 12 volts and uses a quick-connect outlet for straightforward fuel line connection.
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for higher-mileage and earlier-model vehicles where correct fit and dependable fuel delivery matter. This part cross-references Mopar 68004475AE and Carter P76509M for the same application. Search terms such as Chrysler 200 fuel pump module assembly, Dodge Avenger in-tank fuel pump, and Chrysler Sebring fuel sending unit replacement all point to this direct-fit part number PN3127.
Common Repair Symptoms
- Hard starting or extended crank time
- Engine stalling from inconsistent fuel delivery
- Fuel gauge reading incorrectly due to sender issues
- Low fuel pressure or pressure that falls outside specification
- Poor drivability caused by a failing in-tank pump module
Installation Notes and Tips
Verify vehicle fitment by year, make, and model before installation. This module is specific fit and uses a trapezoid female connector with a pin-style terminal design, so connector matching is important during replacement. The package includes the module assembly, float arm, seal, and instruction sheet; mounting hardware and lock ring are not included.
Because this is an in-tank fuel system component, clean the tank area before removal and inspect the fuel lines, electrical connector, and tank sealing surface during service. Confirm the outlet type, connector quantity, and fuel line routing before final assembly.
Quality Assurance
Sparta fuel system parts are backed by Delphi’s OE fuel expertise, with product selection focused on fit and performance for the listed applications. PN3127 is a standard replacement module built for the confirmed Chrysler and Dodge fitments shown above.
Original: $183.51
-65%$183.51
$64.23Description
Fuel Pump Module Assembly for Chrysler and Dodge
Sparta PN3127 is a standard replacement fuel pump module assembly for specific Chrysler and Dodge applications. It includes the fuel sending unit, regulator, strainer, fuel filter, gasket/seal, and float arm for a complete in-tank service solution.
Compatible with 2011-2014 Chrysler 200, 2008-2014 Dodge Avenger, and 2007-2010 Chrysler Sebring, this Sparta fuel pump module assembly is built for gas-powered vehicles that need a direct-fit replacement. The PN3127 assembly uses a 12-volt electric turbine pump with a quick-connect outlet and a single female connector.
Key Features
- Sparta PN3127 fuel pump module assembly for specific Chrysler and Dodge fitments
- In-tank electric turbine pump design
- Includes fuel sending unit, regulator, strainer, fuel filter, gasket/seal, and float arm
- 12V operation with 1 connector, 4 terminals, and female connector shape
- Quick-connect outlet with 0.375 in. outside diameter
- Standard replacement grade for gas applications
- Plastic housing with nitrile rubber seal material
- Maximum pressure rating of 62 psi and average flow rating of 20
Detailed Description
Sparta PN3127 is an in-tank fuel pump module assembly engineered for specific Chrysler 200, Dodge Avenger, and Chrysler Sebring applications. It is designed for gas fuel systems and includes the fuel sending unit, regulator, internal strainer, fuel filter, and seal to support a complete replacement of the fuel delivery module. The turbine-style electric pump operates at 12 volts and uses a quick-connect outlet for straightforward fuel line connection.
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for higher-mileage and earlier-model vehicles where correct fit and dependable fuel delivery matter. This part cross-references Mopar 68004475AE and Carter P76509M for the same application. Search terms such as Chrysler 200 fuel pump module assembly, Dodge Avenger in-tank fuel pump, and Chrysler Sebring fuel sending unit replacement all point to this direct-fit part number PN3127.
Common Repair Symptoms
- Hard starting or extended crank time
- Engine stalling from inconsistent fuel delivery
- Fuel gauge reading incorrectly due to sender issues
- Low fuel pressure or pressure that falls outside specification
- Poor drivability caused by a failing in-tank pump module
Installation Notes and Tips
Verify vehicle fitment by year, make, and model before installation. This module is specific fit and uses a trapezoid female connector with a pin-style terminal design, so connector matching is important during replacement. The package includes the module assembly, float arm, seal, and instruction sheet; mounting hardware and lock ring are not included.
Because this is an in-tank fuel system component, clean the tank area before removal and inspect the fuel lines, electrical connector, and tank sealing surface during service. Confirm the outlet type, connector quantity, and fuel line routing before final assembly.
Quality Assurance
Sparta fuel system parts are backed by Delphi’s OE fuel expertise, with product selection focused on fit and performance for the listed applications. PN3127 is a standard replacement module built for the confirmed Chrysler and Dodge fitments shown above.
