HomeStore

Sparta PN3057 Fuel Pump Module Assembly

Product image 1

Sparta PN3057 Fuel Pump Module Assembly

Fuel Pump Module Assembly for Nissan Sentra

Sparta PN3057 is a specific-fit in-tank fuel pump module assembly for 2002-2006 Nissan Sentra models. Built for gasoline applications, it includes the fuel sending unit, strainer, fuel filter, gasket/seal, and lock ring for a complete replacement package.

Key Features

  • Specific-fit fuel pump module assembly for 2002-2006 Nissan Sentra
  • In-tank electric turbine pump design with 12-volt operation
  • Fuel sending unit included for accurate fuel level reporting
  • Maximum pressure rating of 54 psi with 28 average flow rating
  • Includes strainer, fuel filter, gasket/seal, and lock ring
  • Single female rectangle connector with 5 male blade terminals
  • Plastic housing with quick-connect outlet and 0.375 in. outlet outside diameter
  • Standard replacement grade for gasoline fuel systems

Detailed Description

Sparta PN3057 is engineered as a direct replacement fuel pump module assembly for Nissan Sentra applications from 2002 through 2006. It is distributed by Delphi, an OE fuel system supplier, and is positioned for higher-mileage and earlier-model vehicles where correct fit and dependable fuel delivery matter. This assembly is designed for in-tank installation and includes the fuel sending unit, helping restore both fuel supply and fuel level signal performance in one service part.

The module uses an electric turbine pump with a 51 to 54 psi operating range, 5 amp average current draw, and a quick-connect outlet for straightforward fuel line connection. The package contents include the module assembly with float arm, seal, lock ring, and instruction sheet. This part cross-references Bosch 69701 and Carter P76411M for the same application. Search terms such as 2002 Nissan Sentra fuel pump module assembly, 2006 Nissan Sentra in-tank fuel pump, and Sparta PN3057 fuel sending unit replacement align with this application.

Common Problems This Part Can Address

  • Hard starting caused by weak fuel delivery
  • Engine hesitation or stalling from inconsistent pump output
  • Incorrect fuel gauge readings from a worn sending unit
  • Low fuel pressure affecting drivability
  • Fuel system noise or pump wear in higher-mileage vehicles

Installation Notes and Tips

Verify the vehicle’s connector style, terminal count, outlet type, and in-tank configuration before installation. Replace the seal and lock ring during service, and confirm the float arm moves freely before closing the tank. Because this is a specific-fit module for Nissan Sentra applications, compare the original unit to the replacement part before assembly.

Quality Assurance

Sparta is backed by Delphi distribution and OE fuel system expertise, with a focus on fit and performance for older and higher-mileage vehicles. PN3057 is built as a standard replacement fuel pump module assembly for gasoline applications.

Fuel Pump Module Assembly for Nissan Sentra

Sparta PN3057 is a specific-fit in-tank fuel pump module assembly for 2002-2006 Nissan Sentra models. Built for gasoline applications, it includes the fuel sending unit, strainer, fuel filter, gasket/seal, and lock ring for a complete replacement package.

Key Features

  • Specific-fit fuel pump module assembly for 2002-2006 Nissan Sentra
  • In-tank electric turbine pump design with 12-volt operation
  • Fuel sending unit included for accurate fuel level reporting
  • Maximum pressure rating of 54 psi with 28 average flow rating
  • Includes strainer, fuel filter, gasket/seal, and lock ring
  • Single female rectangle connector with 5 male blade terminals
  • Plastic housing with quick-connect outlet and 0.375 in. outlet outside diameter
  • Standard replacement grade for gasoline fuel systems

Detailed Description

Sparta PN3057 is engineered as a direct replacement fuel pump module assembly for Nissan Sentra applications from 2002 through 2006. It is distributed by Delphi, an OE fuel system supplier, and is positioned for higher-mileage and earlier-model vehicles where correct fit and dependable fuel delivery matter. This assembly is designed for in-tank installation and includes the fuel sending unit, helping restore both fuel supply and fuel level signal performance in one service part.

The module uses an electric turbine pump with a 51 to 54 psi operating range, 5 amp average current draw, and a quick-connect outlet for straightforward fuel line connection. The package contents include the module assembly with float arm, seal, lock ring, and instruction sheet. This part cross-references Bosch 69701 and Carter P76411M for the same application. Search terms such as 2002 Nissan Sentra fuel pump module assembly, 2006 Nissan Sentra in-tank fuel pump, and Sparta PN3057 fuel sending unit replacement align with this application.

Common Problems This Part Can Address

  • Hard starting caused by weak fuel delivery
  • Engine hesitation or stalling from inconsistent pump output
  • Incorrect fuel gauge readings from a worn sending unit
  • Low fuel pressure affecting drivability
  • Fuel system noise or pump wear in higher-mileage vehicles

Installation Notes and Tips

Verify the vehicle’s connector style, terminal count, outlet type, and in-tank configuration before installation. Replace the seal and lock ring during service, and confirm the float arm moves freely before closing the tank. Because this is a specific-fit module for Nissan Sentra applications, compare the original unit to the replacement part before assembly.

Quality Assurance

Sparta is backed by Delphi distribution and OE fuel system expertise, with a focus on fit and performance for older and higher-mileage vehicles. PN3057 is built as a standard replacement fuel pump module assembly for gasoline applications.

$132.68
Sparta PN3057 Fuel Pump Module Assembly
$132.68

Description

Fuel Pump Module Assembly for Nissan Sentra

Sparta PN3057 is a specific-fit in-tank fuel pump module assembly for 2002-2006 Nissan Sentra models. Built for gasoline applications, it includes the fuel sending unit, strainer, fuel filter, gasket/seal, and lock ring for a complete replacement package.

Key Features

  • Specific-fit fuel pump module assembly for 2002-2006 Nissan Sentra
  • In-tank electric turbine pump design with 12-volt operation
  • Fuel sending unit included for accurate fuel level reporting
  • Maximum pressure rating of 54 psi with 28 average flow rating
  • Includes strainer, fuel filter, gasket/seal, and lock ring
  • Single female rectangle connector with 5 male blade terminals
  • Plastic housing with quick-connect outlet and 0.375 in. outlet outside diameter
  • Standard replacement grade for gasoline fuel systems

Detailed Description

Sparta PN3057 is engineered as a direct replacement fuel pump module assembly for Nissan Sentra applications from 2002 through 2006. It is distributed by Delphi, an OE fuel system supplier, and is positioned for higher-mileage and earlier-model vehicles where correct fit and dependable fuel delivery matter. This assembly is designed for in-tank installation and includes the fuel sending unit, helping restore both fuel supply and fuel level signal performance in one service part.

The module uses an electric turbine pump with a 51 to 54 psi operating range, 5 amp average current draw, and a quick-connect outlet for straightforward fuel line connection. The package contents include the module assembly with float arm, seal, lock ring, and instruction sheet. This part cross-references Bosch 69701 and Carter P76411M for the same application. Search terms such as 2002 Nissan Sentra fuel pump module assembly, 2006 Nissan Sentra in-tank fuel pump, and Sparta PN3057 fuel sending unit replacement align with this application.

Common Problems This Part Can Address

  • Hard starting caused by weak fuel delivery
  • Engine hesitation or stalling from inconsistent pump output
  • Incorrect fuel gauge readings from a worn sending unit
  • Low fuel pressure affecting drivability
  • Fuel system noise or pump wear in higher-mileage vehicles

Installation Notes and Tips

Verify the vehicle’s connector style, terminal count, outlet type, and in-tank configuration before installation. Replace the seal and lock ring during service, and confirm the float arm moves freely before closing the tank. Because this is a specific-fit module for Nissan Sentra applications, compare the original unit to the replacement part before assembly.

Quality Assurance

Sparta is backed by Delphi distribution and OE fuel system expertise, with a focus on fit and performance for older and higher-mileage vehicles. PN3057 is built as a standard replacement fuel pump module assembly for gasoline applications.