Sparta PN3019 Fuel Pump Module Assembly
Fuel Pump Module Assembly for Chrysler and Dodge
The Sparta PN3019 fuel pump module assembly is a specific-fit, in-tank replacement for select Chrysler, Dodge, and Plymouth vehicles. Built for gasoline applications, it includes the fuel sending unit, regulator, strainer, gasket, and seal for a complete service solution.
Backed by Delphi distribution and OE-focused engineering, this Sparta fuel pump module is aimed at higher-mileage and earlier-model vehicles that need dependable fuel delivery and accurate tank level reporting. It is a direct replacement for 1997-2000 Plymouth Breeze, 1998-2000 Chrysler Cirrus, 1998-2000 Dodge Stratus, and 1999-2000 Chrysler Sebring applications.
Key Features
- Part number: PN3019
- Specific-fit, standard replacement fuel pump module assembly
- In-tank electric G-rotor pump design
- Includes fuel sending unit, regulator, strainer, gasket, and seal
- 12-volt gasoline application
- Maximum pressure: 93 psi; minimum pressure: 44 psi
- Average flow rating: 23
- Quick-connect outlet with 2 outlets
- Plastic housing with nitrile rubber seal material
- 2 connectors, 7 terminals, male connector / female terminal configuration
Detailed Description
Sparta PN3019 is a fuel pump module assembly engineered for direct replacement service in select Chrysler Cirrus, Chrysler Sebring, Dodge Stratus, and Plymouth Breeze models. The assembly uses an electric G-rotor pump and mounts inside the fuel tank, where it delivers gasoline at the pressure range required by the vehicle’s fuel system. The included sending unit supports fuel level reporting, while the integrated regulator helps maintain consistent fuel delivery.
This module is built as a standard replacement for earlier-model, higher-mileage vehicles and is supplied with the seal and strainer needed for the repair. The quick-connect outlet, dual outlet design, and specific-fit configuration help streamline replacement of the original in-tank fuel pump module. This part cross-references Bosch 67653 for the same application.
What This Part Helps Address
- Hard starting caused by weak fuel pressure
- Engine stalling from inconsistent fuel delivery
- Fuel gauge readings that no longer track tank level accurately
- Loss of pressure under load or during acceleration
- Noisy or failing in-tank pump operation
Installation Notes and Tips
Install this module in the fuel tank using the correct service procedure for the vehicle. Confirm connector shape, terminal count, outlet style, and pressure requirements before installation. Because mounting hardware and lock ring are not included, reuse or source the required vehicle-specific hardware as needed. Always verify the tank is clean and inspect the sealing surface before fitting the new gasket and seal.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for applications where fit and fuel-system performance matter. PN3019 is built as a direct, specific-fit replacement for the listed Chrysler, Dodge, and Plymouth vehicles.
Fuel Pump Module Assembly for Chrysler and Dodge
The Sparta PN3019 fuel pump module assembly is a specific-fit, in-tank replacement for select Chrysler, Dodge, and Plymouth vehicles. Built for gasoline applications, it includes the fuel sending unit, regulator, strainer, gasket, and seal for a complete service solution.
Backed by Delphi distribution and OE-focused engineering, this Sparta fuel pump module is aimed at higher-mileage and earlier-model vehicles that need dependable fuel delivery and accurate tank level reporting. It is a direct replacement for 1997-2000 Plymouth Breeze, 1998-2000 Chrysler Cirrus, 1998-2000 Dodge Stratus, and 1999-2000 Chrysler Sebring applications.
Key Features
- Part number: PN3019
- Specific-fit, standard replacement fuel pump module assembly
- In-tank electric G-rotor pump design
- Includes fuel sending unit, regulator, strainer, gasket, and seal
- 12-volt gasoline application
- Maximum pressure: 93 psi; minimum pressure: 44 psi
- Average flow rating: 23
- Quick-connect outlet with 2 outlets
- Plastic housing with nitrile rubber seal material
- 2 connectors, 7 terminals, male connector / female terminal configuration
Detailed Description
Sparta PN3019 is a fuel pump module assembly engineered for direct replacement service in select Chrysler Cirrus, Chrysler Sebring, Dodge Stratus, and Plymouth Breeze models. The assembly uses an electric G-rotor pump and mounts inside the fuel tank, where it delivers gasoline at the pressure range required by the vehicle’s fuel system. The included sending unit supports fuel level reporting, while the integrated regulator helps maintain consistent fuel delivery.
This module is built as a standard replacement for earlier-model, higher-mileage vehicles and is supplied with the seal and strainer needed for the repair. The quick-connect outlet, dual outlet design, and specific-fit configuration help streamline replacement of the original in-tank fuel pump module. This part cross-references Bosch 67653 for the same application.
What This Part Helps Address
- Hard starting caused by weak fuel pressure
- Engine stalling from inconsistent fuel delivery
- Fuel gauge readings that no longer track tank level accurately
- Loss of pressure under load or during acceleration
- Noisy or failing in-tank pump operation
Installation Notes and Tips
Install this module in the fuel tank using the correct service procedure for the vehicle. Confirm connector shape, terminal count, outlet style, and pressure requirements before installation. Because mounting hardware and lock ring are not included, reuse or source the required vehicle-specific hardware as needed. Always verify the tank is clean and inspect the sealing surface before fitting the new gasket and seal.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for applications where fit and fuel-system performance matter. PN3019 is built as a direct, specific-fit replacement for the listed Chrysler, Dodge, and Plymouth vehicles.
Original: $121.69
-65%$121.69
$42.59Description
Fuel Pump Module Assembly for Chrysler and Dodge
The Sparta PN3019 fuel pump module assembly is a specific-fit, in-tank replacement for select Chrysler, Dodge, and Plymouth vehicles. Built for gasoline applications, it includes the fuel sending unit, regulator, strainer, gasket, and seal for a complete service solution.
Backed by Delphi distribution and OE-focused engineering, this Sparta fuel pump module is aimed at higher-mileage and earlier-model vehicles that need dependable fuel delivery and accurate tank level reporting. It is a direct replacement for 1997-2000 Plymouth Breeze, 1998-2000 Chrysler Cirrus, 1998-2000 Dodge Stratus, and 1999-2000 Chrysler Sebring applications.
Key Features
- Part number: PN3019
- Specific-fit, standard replacement fuel pump module assembly
- In-tank electric G-rotor pump design
- Includes fuel sending unit, regulator, strainer, gasket, and seal
- 12-volt gasoline application
- Maximum pressure: 93 psi; minimum pressure: 44 psi
- Average flow rating: 23
- Quick-connect outlet with 2 outlets
- Plastic housing with nitrile rubber seal material
- 2 connectors, 7 terminals, male connector / female terminal configuration
Detailed Description
Sparta PN3019 is a fuel pump module assembly engineered for direct replacement service in select Chrysler Cirrus, Chrysler Sebring, Dodge Stratus, and Plymouth Breeze models. The assembly uses an electric G-rotor pump and mounts inside the fuel tank, where it delivers gasoline at the pressure range required by the vehicle’s fuel system. The included sending unit supports fuel level reporting, while the integrated regulator helps maintain consistent fuel delivery.
This module is built as a standard replacement for earlier-model, higher-mileage vehicles and is supplied with the seal and strainer needed for the repair. The quick-connect outlet, dual outlet design, and specific-fit configuration help streamline replacement of the original in-tank fuel pump module. This part cross-references Bosch 67653 for the same application.
What This Part Helps Address
- Hard starting caused by weak fuel pressure
- Engine stalling from inconsistent fuel delivery
- Fuel gauge readings that no longer track tank level accurately
- Loss of pressure under load or during acceleration
- Noisy or failing in-tank pump operation
Installation Notes and Tips
Install this module in the fuel tank using the correct service procedure for the vehicle. Confirm connector shape, terminal count, outlet style, and pressure requirements before installation. Because mounting hardware and lock ring are not included, reuse or source the required vehicle-specific hardware as needed. Always verify the tank is clean and inspect the sealing surface before fitting the new gasket and seal.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for applications where fit and fuel-system performance matter. PN3019 is built as a direct, specific-fit replacement for the listed Chrysler, Dodge, and Plymouth vehicles.
