Sparta PN2015 Electric Fuel Pump - In-Tank
Sparta PN2015 Electric Fuel Pump
Sparta PN2015 is an in-tank electric fuel pump for gas applications, built as a standard replacement for higher-mileage and earlier-model vehicles. Backed by Delphi’s OE fuel system expertise, it is specified for direct-fit service on select Ford, Mazda, Mercury, and Lincoln platforms.
Key Features
- In-tank electric fuel pump for gasoline fuel systems
- 12-volt, internal turbine pump design
- Specific fit replacement for select applications
- Average flow rating: 28.0
- Operating pressure range: 44 to 90
- Blade-style 2-terminal male connector
- Hose outlet with 0.375 in. / 9.5 mm outside diameter
- Includes mounting hardware, gasket/seal, hose clamps, hose piece, retaining clips, seals, and instruction sheet
- Sparta PN2015 cross-references Bosch 69117 for the same application
Detailed Description
PN2015 is an internal, in-tank fuel pump designed for gas-powered vehicles that need a direct replacement with OE-style fit and performance. The turbine pump design, 7.0 amp average current draw, and 90.0 maximum pressure rating support consistent fuel delivery in older systems where pump output and reliability matter. This Sparta fuel pump is a specific-fit part for vehicles including the Ford Aerostar, Ford Ranger, Ford Taurus, Ford Explorer, Mercury Grand Marquis, Mercury Topaz, Lincoln Town Car, and Mazda B2300, B3000, and B4000.
Compatible vehicle coverage includes Fits 1989-1997 Ford Aerostar, In-Tank; Fits 1990-1997 Ford Ranger, In-Tank; Fits 1994-1997 Mazda B2300, In-Tank; Fits 1994-1997 Mazda B4000, In-Tank; Fits 1994-1996 Mazda B3000, In-Tank; Fits 1989-1995 Ford Taurus, In-Tank; Fits 1991-1994 Ford Explorer, In-Tank; Fits 1990-1991 Ford LTD Crown Victoria, In-Tank; Fits 1988-1991 Ford Tempo, In-Tank; Fits 1990-1991 Mercury Grand Marquis, In-Tank; Fits 1988-1991 Mercury Topaz, In-Tank; Fits 1990 Lincoln Town Car, In-Tank; Fits 1986 Mercury Sable, In-Tank.
Common Problems This Part Can Address
- Hard starting caused by weak fuel pressure
- Engine hesitation or stumble under load
- Fuel starvation from a worn in-tank pump
- Loss of prime or inconsistent fuel delivery
- Poor drivability in higher-mileage fuel systems
Installation Notes and Tips
Verify the vehicle’s in-tank pump configuration, connector style, inlet size, and outlet hose connection before installation. This pump uses a blade terminal connector with 2 terminals, a male connector gender, and a hose-style outlet; the package includes the pump, hose clamps, hose piece, retaining clips, seals, and instructions. The unit does not include a fuel sending unit, regulator, strainer, wiring harness, or seal and lock ring.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for standard replacement service on earlier-model, higher-mileage vehicles. PN2015 is built to OE-informed fitment and fuel delivery requirements for the listed applications.
Sparta PN2015 Electric Fuel Pump
Sparta PN2015 is an in-tank electric fuel pump for gas applications, built as a standard replacement for higher-mileage and earlier-model vehicles. Backed by Delphi’s OE fuel system expertise, it is specified for direct-fit service on select Ford, Mazda, Mercury, and Lincoln platforms.
Key Features
- In-tank electric fuel pump for gasoline fuel systems
- 12-volt, internal turbine pump design
- Specific fit replacement for select applications
- Average flow rating: 28.0
- Operating pressure range: 44 to 90
- Blade-style 2-terminal male connector
- Hose outlet with 0.375 in. / 9.5 mm outside diameter
- Includes mounting hardware, gasket/seal, hose clamps, hose piece, retaining clips, seals, and instruction sheet
- Sparta PN2015 cross-references Bosch 69117 for the same application
Detailed Description
PN2015 is an internal, in-tank fuel pump designed for gas-powered vehicles that need a direct replacement with OE-style fit and performance. The turbine pump design, 7.0 amp average current draw, and 90.0 maximum pressure rating support consistent fuel delivery in older systems where pump output and reliability matter. This Sparta fuel pump is a specific-fit part for vehicles including the Ford Aerostar, Ford Ranger, Ford Taurus, Ford Explorer, Mercury Grand Marquis, Mercury Topaz, Lincoln Town Car, and Mazda B2300, B3000, and B4000.
Compatible vehicle coverage includes Fits 1989-1997 Ford Aerostar, In-Tank; Fits 1990-1997 Ford Ranger, In-Tank; Fits 1994-1997 Mazda B2300, In-Tank; Fits 1994-1997 Mazda B4000, In-Tank; Fits 1994-1996 Mazda B3000, In-Tank; Fits 1989-1995 Ford Taurus, In-Tank; Fits 1991-1994 Ford Explorer, In-Tank; Fits 1990-1991 Ford LTD Crown Victoria, In-Tank; Fits 1988-1991 Ford Tempo, In-Tank; Fits 1990-1991 Mercury Grand Marquis, In-Tank; Fits 1988-1991 Mercury Topaz, In-Tank; Fits 1990 Lincoln Town Car, In-Tank; Fits 1986 Mercury Sable, In-Tank.
Common Problems This Part Can Address
- Hard starting caused by weak fuel pressure
- Engine hesitation or stumble under load
- Fuel starvation from a worn in-tank pump
- Loss of prime or inconsistent fuel delivery
- Poor drivability in higher-mileage fuel systems
Installation Notes and Tips
Verify the vehicle’s in-tank pump configuration, connector style, inlet size, and outlet hose connection before installation. This pump uses a blade terminal connector with 2 terminals, a male connector gender, and a hose-style outlet; the package includes the pump, hose clamps, hose piece, retaining clips, seals, and instructions. The unit does not include a fuel sending unit, regulator, strainer, wiring harness, or seal and lock ring.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for standard replacement service on earlier-model, higher-mileage vehicles. PN2015 is built to OE-informed fitment and fuel delivery requirements for the listed applications.
Original: $53.15
-65%$53.15
$18.60Description
Sparta PN2015 Electric Fuel Pump
Sparta PN2015 is an in-tank electric fuel pump for gas applications, built as a standard replacement for higher-mileage and earlier-model vehicles. Backed by Delphi’s OE fuel system expertise, it is specified for direct-fit service on select Ford, Mazda, Mercury, and Lincoln platforms.
Key Features
- In-tank electric fuel pump for gasoline fuel systems
- 12-volt, internal turbine pump design
- Specific fit replacement for select applications
- Average flow rating: 28.0
- Operating pressure range: 44 to 90
- Blade-style 2-terminal male connector
- Hose outlet with 0.375 in. / 9.5 mm outside diameter
- Includes mounting hardware, gasket/seal, hose clamps, hose piece, retaining clips, seals, and instruction sheet
- Sparta PN2015 cross-references Bosch 69117 for the same application
Detailed Description
PN2015 is an internal, in-tank fuel pump designed for gas-powered vehicles that need a direct replacement with OE-style fit and performance. The turbine pump design, 7.0 amp average current draw, and 90.0 maximum pressure rating support consistent fuel delivery in older systems where pump output and reliability matter. This Sparta fuel pump is a specific-fit part for vehicles including the Ford Aerostar, Ford Ranger, Ford Taurus, Ford Explorer, Mercury Grand Marquis, Mercury Topaz, Lincoln Town Car, and Mazda B2300, B3000, and B4000.
Compatible vehicle coverage includes Fits 1989-1997 Ford Aerostar, In-Tank; Fits 1990-1997 Ford Ranger, In-Tank; Fits 1994-1997 Mazda B2300, In-Tank; Fits 1994-1997 Mazda B4000, In-Tank; Fits 1994-1996 Mazda B3000, In-Tank; Fits 1989-1995 Ford Taurus, In-Tank; Fits 1991-1994 Ford Explorer, In-Tank; Fits 1990-1991 Ford LTD Crown Victoria, In-Tank; Fits 1988-1991 Ford Tempo, In-Tank; Fits 1990-1991 Mercury Grand Marquis, In-Tank; Fits 1988-1991 Mercury Topaz, In-Tank; Fits 1990 Lincoln Town Car, In-Tank; Fits 1986 Mercury Sable, In-Tank.
Common Problems This Part Can Address
- Hard starting caused by weak fuel pressure
- Engine hesitation or stumble under load
- Fuel starvation from a worn in-tank pump
- Loss of prime or inconsistent fuel delivery
- Poor drivability in higher-mileage fuel systems
Installation Notes and Tips
Verify the vehicle’s in-tank pump configuration, connector style, inlet size, and outlet hose connection before installation. This pump uses a blade terminal connector with 2 terminals, a male connector gender, and a hose-style outlet; the package includes the pump, hose clamps, hose piece, retaining clips, seals, and instructions. The unit does not include a fuel sending unit, regulator, strainer, wiring harness, or seal and lock ring.
Quality Assurance
Sparta is distributed by Delphi, an OE full-line fuel supplier, and is positioned for standard replacement service on earlier-model, higher-mileage vehicles. PN2015 is built to OE-informed fitment and fuel delivery requirements for the listed applications.
