HomeStore

Sparta PN2013 Electric Fuel Pump - In-Tank

Product image 1

Sparta PN2013 Electric Fuel Pump - In-Tank

Electric Fuel Pump for Select Nissan, Subaru, Isuzu, and Infiniti

Sparta PN2013 is a specific-fit in-tank electric fuel pump for gasoline applications. Built as a standard replacement for higher-mileage and earlier model vehicles, it supports consistent fuel delivery for select Nissan 240SX, Subaru Legacy and Impreza, Isuzu Pickup, Rodeo, Amigo, Trooper, Impulse, Honda Passport, Infiniti J30 and G20, and related applications.

Key Features

  • In-tank electric fuel pump for gas vehicles
  • 12-volt design with a turbine pump layout
  • Average flow rating: 40.0
  • Operating pressure range: 44 to 80 psi
  • Average current draw: 6.0 amps
  • Specific-fit replacement for select applications
  • Includes mounting hardware and wiring harness
  • Threaded terminal type with 2 terminals and 3-wire configuration
  • Outlet type: hose; inlet type: strainer
  • Package includes pump, hose clamps, hose piece, insulating sleeve, isolator, pall nut, wire, splices, zip ties, and instruction sheet

Product Details

Sparta PN2013 is distributed by Delphi, an OE fuel system supplier, and is engineered for vehicles that need a direct replacement electric fuel pump with the correct in-tank configuration. This unit is built for gasoline use, measures 127.0 mm in length, and uses a turbine-style pump design to deliver fuel at the specified pressure range. It is a practical replacement choice for older import platforms such as the Nissan 240SX, Subaru Legacy, and Isuzu Rodeo when the original pump has worn out or fuel delivery has become inconsistent. This part cross-references Airtex E8235 and Carter P90009 for the same application.

Common Problems This Pump Can Address

  • Hard starting caused by weak fuel pressure
  • Engine hesitation under load from inconsistent fuel delivery
  • Stalling related to a failing in-tank pump
  • Loss of power from insufficient fuel volume
  • Noisy operation from an aging electric fuel pump

Installation Notes and Tips

  • Confirm the vehicle uses an in-tank, specific-fit pump before ordering.
  • Verify connector style, terminal count, and outlet size against the original unit.
  • Inspect the tank, fuel lines, and electrical connections before installation.
  • Replace any worn hoses or clamps during service if needed.
  • Follow the included instruction sheet and observe all fuel-system safety procedures.

Quality Assurance

Sparta fuel system components are backed by Delphi OE expertise and are positioned as standard replacement parts for earlier model, higher-mileage vehicles. PN2013 is built to meet the fitment and performance requirements of the listed applications, including 1989-1998 Nissan 240SX, 1995-1998 Subaru Legacy, 1993-1997 Subaru Impreza, and other select in-tank gasoline vehicles.

Electric Fuel Pump for Select Nissan, Subaru, Isuzu, and Infiniti

Sparta PN2013 is a specific-fit in-tank electric fuel pump for gasoline applications. Built as a standard replacement for higher-mileage and earlier model vehicles, it supports consistent fuel delivery for select Nissan 240SX, Subaru Legacy and Impreza, Isuzu Pickup, Rodeo, Amigo, Trooper, Impulse, Honda Passport, Infiniti J30 and G20, and related applications.

Key Features

  • In-tank electric fuel pump for gas vehicles
  • 12-volt design with a turbine pump layout
  • Average flow rating: 40.0
  • Operating pressure range: 44 to 80 psi
  • Average current draw: 6.0 amps
  • Specific-fit replacement for select applications
  • Includes mounting hardware and wiring harness
  • Threaded terminal type with 2 terminals and 3-wire configuration
  • Outlet type: hose; inlet type: strainer
  • Package includes pump, hose clamps, hose piece, insulating sleeve, isolator, pall nut, wire, splices, zip ties, and instruction sheet

Product Details

Sparta PN2013 is distributed by Delphi, an OE fuel system supplier, and is engineered for vehicles that need a direct replacement electric fuel pump with the correct in-tank configuration. This unit is built for gasoline use, measures 127.0 mm in length, and uses a turbine-style pump design to deliver fuel at the specified pressure range. It is a practical replacement choice for older import platforms such as the Nissan 240SX, Subaru Legacy, and Isuzu Rodeo when the original pump has worn out or fuel delivery has become inconsistent. This part cross-references Airtex E8235 and Carter P90009 for the same application.

Common Problems This Pump Can Address

  • Hard starting caused by weak fuel pressure
  • Engine hesitation under load from inconsistent fuel delivery
  • Stalling related to a failing in-tank pump
  • Loss of power from insufficient fuel volume
  • Noisy operation from an aging electric fuel pump

Installation Notes and Tips

  • Confirm the vehicle uses an in-tank, specific-fit pump before ordering.
  • Verify connector style, terminal count, and outlet size against the original unit.
  • Inspect the tank, fuel lines, and electrical connections before installation.
  • Replace any worn hoses or clamps during service if needed.
  • Follow the included instruction sheet and observe all fuel-system safety procedures.

Quality Assurance

Sparta fuel system components are backed by Delphi OE expertise and are positioned as standard replacement parts for earlier model, higher-mileage vehicles. PN2013 is built to meet the fitment and performance requirements of the listed applications, including 1989-1998 Nissan 240SX, 1995-1998 Subaru Legacy, 1993-1997 Subaru Impreza, and other select in-tank gasoline vehicles.

$14.84

Original: $42.41

-65%
Sparta PN2013 Electric Fuel Pump - In-Tank

$42.41

$14.84

Description

Electric Fuel Pump for Select Nissan, Subaru, Isuzu, and Infiniti

Sparta PN2013 is a specific-fit in-tank electric fuel pump for gasoline applications. Built as a standard replacement for higher-mileage and earlier model vehicles, it supports consistent fuel delivery for select Nissan 240SX, Subaru Legacy and Impreza, Isuzu Pickup, Rodeo, Amigo, Trooper, Impulse, Honda Passport, Infiniti J30 and G20, and related applications.

Key Features

  • In-tank electric fuel pump for gas vehicles
  • 12-volt design with a turbine pump layout
  • Average flow rating: 40.0
  • Operating pressure range: 44 to 80 psi
  • Average current draw: 6.0 amps
  • Specific-fit replacement for select applications
  • Includes mounting hardware and wiring harness
  • Threaded terminal type with 2 terminals and 3-wire configuration
  • Outlet type: hose; inlet type: strainer
  • Package includes pump, hose clamps, hose piece, insulating sleeve, isolator, pall nut, wire, splices, zip ties, and instruction sheet

Product Details

Sparta PN2013 is distributed by Delphi, an OE fuel system supplier, and is engineered for vehicles that need a direct replacement electric fuel pump with the correct in-tank configuration. This unit is built for gasoline use, measures 127.0 mm in length, and uses a turbine-style pump design to deliver fuel at the specified pressure range. It is a practical replacement choice for older import platforms such as the Nissan 240SX, Subaru Legacy, and Isuzu Rodeo when the original pump has worn out or fuel delivery has become inconsistent. This part cross-references Airtex E8235 and Carter P90009 for the same application.

Common Problems This Pump Can Address

  • Hard starting caused by weak fuel pressure
  • Engine hesitation under load from inconsistent fuel delivery
  • Stalling related to a failing in-tank pump
  • Loss of power from insufficient fuel volume
  • Noisy operation from an aging electric fuel pump

Installation Notes and Tips

  • Confirm the vehicle uses an in-tank, specific-fit pump before ordering.
  • Verify connector style, terminal count, and outlet size against the original unit.
  • Inspect the tank, fuel lines, and electrical connections before installation.
  • Replace any worn hoses or clamps during service if needed.
  • Follow the included instruction sheet and observe all fuel-system safety procedures.

Quality Assurance

Sparta fuel system components are backed by Delphi OE expertise and are positioned as standard replacement parts for earlier model, higher-mileage vehicles. PN2013 is built to meet the fitment and performance requirements of the listed applications, including 1989-1998 Nissan 240SX, 1995-1998 Subaru Legacy, 1993-1997 Subaru Impreza, and other select in-tank gasoline vehicles.