R1 Concepts 2115-0396-00 Disc Brake Pad Set - Rear
Rear Brake Pads for BMW Performance Applications
R1 Concepts R1 Performance Sport Pads are rear disc brake pads for select BMW models from 1987-2002. This disc brake pad set is built for drivers replacing worn rear pads on BMW 3 Series, 5 Series, 7 Series, M3, M5, and Z3 applications.
Key Features
- Rear disc brake pad set for BMW rear brake service
- R1 Performance Sport Pads line from R1 Concepts
- Direct fitment for multiple BMW chassis and model years
- Requires the specified brake pad wear sensor for each application
- Part number 2115-0396-00 for catalog identification
Detailed Description
R1 Concepts 2115-0396-00 is a rear disc brake pad set in the R1 Performance Sport Pads line. It covers a wide range of BMW rear brake applications, including the 1987-1995 BMW 525i, 535i, 735i, 735iL, 750iL, 740i, 740iL, 530i, 540i, 525iT, M5, and 1988-1995 BMW M3, plus 1998-2002 BMW Z3 rear fitments. If you are servicing a BMW M3 rear brake pad replacement or a BMW Z3 rear disc brake pad job, this part number is listed for those applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rear brake pad wear on BMW sedans, coupes, and roadsters
- Squealing or noise from worn rear pads
- Reduced braking response from depleted friction material
- Brake warning light service when the listed wear sensor is replaced
- Routine rear brake maintenance on BMW 5 Series, 7 Series, M3, M5, and Z3 models
Installation Notes and Tips
Verify rear axle fitment before ordering and match the wear sensor requirement listed for your vehicle: BPS-31001, BPS-31004, or BPS-31007 depending on application. Confirm rotor condition, caliper operation, and pad hardware condition during brake service. For best results, install on the rear axle as a complete service set and follow BMW brake bedding procedures after installation.
Quality Assurance
R1 Concepts backs the R1 Performance Sport Pads line with application-specific catalog fitment for the listed BMW rear brake applications. Part number 2115-0396-00 is cataloged for direct replacement use on the vehicles shown below.
Compatible With
- Fits 1998-2002 BMW Z3, Rear
- Fits 1995-1999 BMW M3, Rear
- Fits 1989-1995 BMW 525i, Rear
- Fits 1994-1995 BMW 530i, Rear
- Fits 1994-1995 BMW 540i, Rear
- Fits 1993-1994 BMW 740i, Rear
- Fits 1993-1994 BMW 740iL, Rear
- Fits 1988-1994 BMW 750iL, Rear
- Fits 1993 BMW 525iT, Rear
- Fits 1989-1993 BMW 535i, Rear
- Fits 1991-1993 BMW M5, Rear
- Fits 1987-1992 BMW 735i, Rear
- Fits 1988-1992 BMW 735iL, Rear
- Fits 1988-1991 BMW M3, Rear
Rear Brake Pads for BMW Performance Applications
R1 Concepts R1 Performance Sport Pads are rear disc brake pads for select BMW models from 1987-2002. This disc brake pad set is built for drivers replacing worn rear pads on BMW 3 Series, 5 Series, 7 Series, M3, M5, and Z3 applications.
Key Features
- Rear disc brake pad set for BMW rear brake service
- R1 Performance Sport Pads line from R1 Concepts
- Direct fitment for multiple BMW chassis and model years
- Requires the specified brake pad wear sensor for each application
- Part number 2115-0396-00 for catalog identification
Detailed Description
R1 Concepts 2115-0396-00 is a rear disc brake pad set in the R1 Performance Sport Pads line. It covers a wide range of BMW rear brake applications, including the 1987-1995 BMW 525i, 535i, 735i, 735iL, 750iL, 740i, 740iL, 530i, 540i, 525iT, M5, and 1988-1995 BMW M3, plus 1998-2002 BMW Z3 rear fitments. If you are servicing a BMW M3 rear brake pad replacement or a BMW Z3 rear disc brake pad job, this part number is listed for those applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rear brake pad wear on BMW sedans, coupes, and roadsters
- Squealing or noise from worn rear pads
- Reduced braking response from depleted friction material
- Brake warning light service when the listed wear sensor is replaced
- Routine rear brake maintenance on BMW 5 Series, 7 Series, M3, M5, and Z3 models
Installation Notes and Tips
Verify rear axle fitment before ordering and match the wear sensor requirement listed for your vehicle: BPS-31001, BPS-31004, or BPS-31007 depending on application. Confirm rotor condition, caliper operation, and pad hardware condition during brake service. For best results, install on the rear axle as a complete service set and follow BMW brake bedding procedures after installation.
Quality Assurance
R1 Concepts backs the R1 Performance Sport Pads line with application-specific catalog fitment for the listed BMW rear brake applications. Part number 2115-0396-00 is cataloged for direct replacement use on the vehicles shown below.
Compatible With
- Fits 1998-2002 BMW Z3, Rear
- Fits 1995-1999 BMW M3, Rear
- Fits 1989-1995 BMW 525i, Rear
- Fits 1994-1995 BMW 530i, Rear
- Fits 1994-1995 BMW 540i, Rear
- Fits 1993-1994 BMW 740i, Rear
- Fits 1993-1994 BMW 740iL, Rear
- Fits 1988-1994 BMW 750iL, Rear
- Fits 1993 BMW 525iT, Rear
- Fits 1989-1993 BMW 535i, Rear
- Fits 1991-1993 BMW M5, Rear
- Fits 1987-1992 BMW 735i, Rear
- Fits 1988-1992 BMW 735iL, Rear
- Fits 1988-1991 BMW M3, Rear
Description
Rear Brake Pads for BMW Performance Applications
R1 Concepts R1 Performance Sport Pads are rear disc brake pads for select BMW models from 1987-2002. This disc brake pad set is built for drivers replacing worn rear pads on BMW 3 Series, 5 Series, 7 Series, M3, M5, and Z3 applications.
Key Features
- Rear disc brake pad set for BMW rear brake service
- R1 Performance Sport Pads line from R1 Concepts
- Direct fitment for multiple BMW chassis and model years
- Requires the specified brake pad wear sensor for each application
- Part number 2115-0396-00 for catalog identification
Detailed Description
R1 Concepts 2115-0396-00 is a rear disc brake pad set in the R1 Performance Sport Pads line. It covers a wide range of BMW rear brake applications, including the 1987-1995 BMW 525i, 535i, 735i, 735iL, 750iL, 740i, 740iL, 530i, 540i, 525iT, M5, and 1988-1995 BMW M3, plus 1998-2002 BMW Z3 rear fitments. If you are servicing a BMW M3 rear brake pad replacement or a BMW Z3 rear disc brake pad job, this part number is listed for those applications.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rear brake pad wear on BMW sedans, coupes, and roadsters
- Squealing or noise from worn rear pads
- Reduced braking response from depleted friction material
- Brake warning light service when the listed wear sensor is replaced
- Routine rear brake maintenance on BMW 5 Series, 7 Series, M3, M5, and Z3 models
Installation Notes and Tips
Verify rear axle fitment before ordering and match the wear sensor requirement listed for your vehicle: BPS-31001, BPS-31004, or BPS-31007 depending on application. Confirm rotor condition, caliper operation, and pad hardware condition during brake service. For best results, install on the rear axle as a complete service set and follow BMW brake bedding procedures after installation.
Quality Assurance
R1 Concepts backs the R1 Performance Sport Pads line with application-specific catalog fitment for the listed BMW rear brake applications. Part number 2115-0396-00 is cataloged for direct replacement use on the vehicles shown below.
Compatible With
- Fits 1998-2002 BMW Z3, Rear
- Fits 1995-1999 BMW M3, Rear
- Fits 1989-1995 BMW 525i, Rear
- Fits 1994-1995 BMW 530i, Rear
- Fits 1994-1995 BMW 540i, Rear
- Fits 1993-1994 BMW 740i, Rear
- Fits 1993-1994 BMW 740iL, Rear
- Fits 1988-1994 BMW 750iL, Rear
- Fits 1993 BMW 525iT, Rear
- Fits 1989-1993 BMW 535i, Rear
- Fits 1991-1993 BMW M5, Rear
- Fits 1987-1992 BMW 735i, Rear
- Fits 1988-1992 BMW 735iL, Rear
- Fits 1988-1991 BMW M3, Rear
