Mevotech TXMS508188 Suspension Stabilizer Bar Link Kit - Front Right
Front Right Stabilizer Link for Malibu and Regal
Mevotech TXMS508188 is a front right suspension stabilizer bar link kit built for demanding daily use on passenger vehicles, SUVs, fleets, and working trucks. It uses ball joint ends, greaseable sintered metal bearings, and a pre-greased design to support consistent steering and suspension control.
Key Features
- Front right stabilizer bar link kit for select Chevrolet Malibu and Buick applications
- Ball joint ends on both sides for secure suspension connection
- Pre-greased and greaseable for serviceable operation
- Sintered metal bearing material for durability under repeated load
- Dust boot included for added joint protection
- Grease fittings, locking nuts, and hardware included
- Threaded stud design for direct installation
- Length: 10.83 in.
Detailed Description
Mevotech TTX TXMS508188 is engineered for front suspension service where stabilizer link wear can affect handling, noise, and ride control. The design uses threaded ball joint ends, a dust boot, and greaseable sintered metal bearings to help maintain joint movement and reduce service issues in high-use conditions. This part cross-references MOOG Chassis Products K750905 for the same application. It is a direct-fit option for the front right position on the 2016-2025 Chevrolet Malibu, 2018-2020 Buick Regal Sportback, 2018-2020 Buick Regal TourX, and 2017-2019 Buick LaCrosse. TXMS508188 is a practical replacement when the original stabilizer link has looseness, noise, or visible boot damage.
What This Part Helps Address
- Front-end clunking or rattling from a worn stabilizer link
- Excess play in the front right suspension connection
- Grease loss or contamination at the joint area
- Handling instability caused by worn sway bar link components
- Boot failure that exposes the joint to road debris and moisture
Installation Notes and Tips
Fits 2016-2025 Chevrolet Malibu, front right. Fits 2018-2020 Buick Regal Sportback, front right. Fits 2018-2020 Buick Regal TourX, front right. Fits 2017-2019 Buick LaCrosse, front right. Confirm the front right position, compare the 10.83 in. length to the removed part, and inspect the sway bar and strut mounting points before installation. Use the included locking nuts and hardware, and follow the vehicle service procedure for torque specifications. Grease the fittings during service intervals to support long-term joint performance.
Quality Assurance
Mevotech TTX parts are built around heavy-duty suspension engineering for commercial and passenger-duty use. TXMS508188 uses serviceable, greaseable components and protective boot sealing to support durability in demanding front suspension applications.
Front Right Stabilizer Link for Malibu and Regal
Mevotech TXMS508188 is a front right suspension stabilizer bar link kit built for demanding daily use on passenger vehicles, SUVs, fleets, and working trucks. It uses ball joint ends, greaseable sintered metal bearings, and a pre-greased design to support consistent steering and suspension control.
Key Features
- Front right stabilizer bar link kit for select Chevrolet Malibu and Buick applications
- Ball joint ends on both sides for secure suspension connection
- Pre-greased and greaseable for serviceable operation
- Sintered metal bearing material for durability under repeated load
- Dust boot included for added joint protection
- Grease fittings, locking nuts, and hardware included
- Threaded stud design for direct installation
- Length: 10.83 in.
Detailed Description
Mevotech TTX TXMS508188 is engineered for front suspension service where stabilizer link wear can affect handling, noise, and ride control. The design uses threaded ball joint ends, a dust boot, and greaseable sintered metal bearings to help maintain joint movement and reduce service issues in high-use conditions. This part cross-references MOOG Chassis Products K750905 for the same application. It is a direct-fit option for the front right position on the 2016-2025 Chevrolet Malibu, 2018-2020 Buick Regal Sportback, 2018-2020 Buick Regal TourX, and 2017-2019 Buick LaCrosse. TXMS508188 is a practical replacement when the original stabilizer link has looseness, noise, or visible boot damage.
What This Part Helps Address
- Front-end clunking or rattling from a worn stabilizer link
- Excess play in the front right suspension connection
- Grease loss or contamination at the joint area
- Handling instability caused by worn sway bar link components
- Boot failure that exposes the joint to road debris and moisture
Installation Notes and Tips
Fits 2016-2025 Chevrolet Malibu, front right. Fits 2018-2020 Buick Regal Sportback, front right. Fits 2018-2020 Buick Regal TourX, front right. Fits 2017-2019 Buick LaCrosse, front right. Confirm the front right position, compare the 10.83 in. length to the removed part, and inspect the sway bar and strut mounting points before installation. Use the included locking nuts and hardware, and follow the vehicle service procedure for torque specifications. Grease the fittings during service intervals to support long-term joint performance.
Quality Assurance
Mevotech TTX parts are built around heavy-duty suspension engineering for commercial and passenger-duty use. TXMS508188 uses serviceable, greaseable components and protective boot sealing to support durability in demanding front suspension applications.
Original: $67.61
-65%$67.61
$23.66Description
Front Right Stabilizer Link for Malibu and Regal
Mevotech TXMS508188 is a front right suspension stabilizer bar link kit built for demanding daily use on passenger vehicles, SUVs, fleets, and working trucks. It uses ball joint ends, greaseable sintered metal bearings, and a pre-greased design to support consistent steering and suspension control.
Key Features
- Front right stabilizer bar link kit for select Chevrolet Malibu and Buick applications
- Ball joint ends on both sides for secure suspension connection
- Pre-greased and greaseable for serviceable operation
- Sintered metal bearing material for durability under repeated load
- Dust boot included for added joint protection
- Grease fittings, locking nuts, and hardware included
- Threaded stud design for direct installation
- Length: 10.83 in.
Detailed Description
Mevotech TTX TXMS508188 is engineered for front suspension service where stabilizer link wear can affect handling, noise, and ride control. The design uses threaded ball joint ends, a dust boot, and greaseable sintered metal bearings to help maintain joint movement and reduce service issues in high-use conditions. This part cross-references MOOG Chassis Products K750905 for the same application. It is a direct-fit option for the front right position on the 2016-2025 Chevrolet Malibu, 2018-2020 Buick Regal Sportback, 2018-2020 Buick Regal TourX, and 2017-2019 Buick LaCrosse. TXMS508188 is a practical replacement when the original stabilizer link has looseness, noise, or visible boot damage.
What This Part Helps Address
- Front-end clunking or rattling from a worn stabilizer link
- Excess play in the front right suspension connection
- Grease loss or contamination at the joint area
- Handling instability caused by worn sway bar link components
- Boot failure that exposes the joint to road debris and moisture
Installation Notes and Tips
Fits 2016-2025 Chevrolet Malibu, front right. Fits 2018-2020 Buick Regal Sportback, front right. Fits 2018-2020 Buick Regal TourX, front right. Fits 2017-2019 Buick LaCrosse, front right. Confirm the front right position, compare the 10.83 in. length to the removed part, and inspect the sway bar and strut mounting points before installation. Use the included locking nuts and hardware, and follow the vehicle service procedure for torque specifications. Grease the fittings during service intervals to support long-term joint performance.
Quality Assurance
Mevotech TTX parts are built around heavy-duty suspension engineering for commercial and passenger-duty use. TXMS508188 uses serviceable, greaseable components and protective boot sealing to support durability in demanding front suspension applications.
