Mevotech TXMS508187 Suspension Stabilizer Bar Link Kit - Front Left
Front Left Stabilizer Link for Select GM Vehicles
Mevotech TXMS508187 is a front left suspension stabilizer bar link kit built for demanding daily use on select Chevrolet and Buick applications. It uses ball joint ends, greaseable sintered metal bearings, and pre-greased construction to support consistent steering response and suspension control.
Key Features
- Front left stabilizer bar link kit for the front suspension
- Ball joint ends on both sides for secure articulation
- Pre-greased and greaseable for serviceable operation
- Sintered metal bearing material for durability under repeated load
- Dust boots included for added seal protection
- Grease fittings, locking nuts, and hardware included
- Threaded stud design with a 10.83 in. length
Product Details
Mevotech TTX TXMS508187 is engineered for high-usage passenger vehicles, SUVs, fleets, and working trucks that need a durable front stabilizer link. The design combines threaded ball joint ends with self-lubricating sintered metal bearings to help maintain smooth movement at the sway bar connection point. Built-in dust boots and greaseable construction add serviceability, while the included locking nuts and hardware support a more efficient repair process. This part cross-references MOOG Chassis Products K750904 for the same application.
Compatible With 2016-2025 Chevrolet Malibu, front left; 2018-2020 Buick Regal Sportback, front left; 2018-2020 Buick Regal TourX, front left; and 2017-2019 Buick LaCrosse, front left. TXMS508187 is a direct-fit front stabilizer link option for these vehicles when replacing worn sway bar linkage components.
Common Problems This Part Can Address
- Clunking or rattling from the front suspension
- Loose or unstable steering feel over bumps
- Excess play in the sway bar connection
- Worn or damaged stabilizer link boots
- Grease loss or accelerated joint wear
Installation Notes
Verify front left fitment before installation and compare the original link length, stud style, and end configuration to the removed part. The threaded ball joint ends and included locking nuts are intended to simplify replacement on the Chevrolet Malibu, Buick Regal Sportback, Buick Regal TourX, and Buick LaCrosse applications listed above. Inspect adjacent sway bar bushings and suspension hardware during service to avoid repeat noise or handling concerns.
Quality Assurance
Mevotech TTX parts are built with advanced materials and service-focused design features for demanding use. TXMS508187 follows that approach with greaseable sintered bearings, protective boots, and included service hardware for a durable front suspension repair.
Front Left Stabilizer Link for Select GM Vehicles
Mevotech TXMS508187 is a front left suspension stabilizer bar link kit built for demanding daily use on select Chevrolet and Buick applications. It uses ball joint ends, greaseable sintered metal bearings, and pre-greased construction to support consistent steering response and suspension control.
Key Features
- Front left stabilizer bar link kit for the front suspension
- Ball joint ends on both sides for secure articulation
- Pre-greased and greaseable for serviceable operation
- Sintered metal bearing material for durability under repeated load
- Dust boots included for added seal protection
- Grease fittings, locking nuts, and hardware included
- Threaded stud design with a 10.83 in. length
Product Details
Mevotech TTX TXMS508187 is engineered for high-usage passenger vehicles, SUVs, fleets, and working trucks that need a durable front stabilizer link. The design combines threaded ball joint ends with self-lubricating sintered metal bearings to help maintain smooth movement at the sway bar connection point. Built-in dust boots and greaseable construction add serviceability, while the included locking nuts and hardware support a more efficient repair process. This part cross-references MOOG Chassis Products K750904 for the same application.
Compatible With 2016-2025 Chevrolet Malibu, front left; 2018-2020 Buick Regal Sportback, front left; 2018-2020 Buick Regal TourX, front left; and 2017-2019 Buick LaCrosse, front left. TXMS508187 is a direct-fit front stabilizer link option for these vehicles when replacing worn sway bar linkage components.
Common Problems This Part Can Address
- Clunking or rattling from the front suspension
- Loose or unstable steering feel over bumps
- Excess play in the sway bar connection
- Worn or damaged stabilizer link boots
- Grease loss or accelerated joint wear
Installation Notes
Verify front left fitment before installation and compare the original link length, stud style, and end configuration to the removed part. The threaded ball joint ends and included locking nuts are intended to simplify replacement on the Chevrolet Malibu, Buick Regal Sportback, Buick Regal TourX, and Buick LaCrosse applications listed above. Inspect adjacent sway bar bushings and suspension hardware during service to avoid repeat noise or handling concerns.
Quality Assurance
Mevotech TTX parts are built with advanced materials and service-focused design features for demanding use. TXMS508187 follows that approach with greaseable sintered bearings, protective boots, and included service hardware for a durable front suspension repair.
Original: $67.61
-65%$67.61
$23.66Description
Front Left Stabilizer Link for Select GM Vehicles
Mevotech TXMS508187 is a front left suspension stabilizer bar link kit built for demanding daily use on select Chevrolet and Buick applications. It uses ball joint ends, greaseable sintered metal bearings, and pre-greased construction to support consistent steering response and suspension control.
Key Features
- Front left stabilizer bar link kit for the front suspension
- Ball joint ends on both sides for secure articulation
- Pre-greased and greaseable for serviceable operation
- Sintered metal bearing material for durability under repeated load
- Dust boots included for added seal protection
- Grease fittings, locking nuts, and hardware included
- Threaded stud design with a 10.83 in. length
Product Details
Mevotech TTX TXMS508187 is engineered for high-usage passenger vehicles, SUVs, fleets, and working trucks that need a durable front stabilizer link. The design combines threaded ball joint ends with self-lubricating sintered metal bearings to help maintain smooth movement at the sway bar connection point. Built-in dust boots and greaseable construction add serviceability, while the included locking nuts and hardware support a more efficient repair process. This part cross-references MOOG Chassis Products K750904 for the same application.
Compatible With 2016-2025 Chevrolet Malibu, front left; 2018-2020 Buick Regal Sportback, front left; 2018-2020 Buick Regal TourX, front left; and 2017-2019 Buick LaCrosse, front left. TXMS508187 is a direct-fit front stabilizer link option for these vehicles when replacing worn sway bar linkage components.
Common Problems This Part Can Address
- Clunking or rattling from the front suspension
- Loose or unstable steering feel over bumps
- Excess play in the sway bar connection
- Worn or damaged stabilizer link boots
- Grease loss or accelerated joint wear
Installation Notes
Verify front left fitment before installation and compare the original link length, stud style, and end configuration to the removed part. The threaded ball joint ends and included locking nuts are intended to simplify replacement on the Chevrolet Malibu, Buick Regal Sportback, Buick Regal TourX, and Buick LaCrosse applications listed above. Inspect adjacent sway bar bushings and suspension hardware during service to avoid repeat noise or handling concerns.
Quality Assurance
Mevotech TTX parts are built with advanced materials and service-focused design features for demanding use. TXMS508187 follows that approach with greaseable sintered bearings, protective boots, and included service hardware for a durable front suspension repair.
