Mevotech TXMS406113 Steering Tie Rod End - Front Right Outer
Mevotech TTX Steering Tie Rod End for Ford Ranger
The Mevotech TTX steering tie rod end is built for demanding steering service on the 2019-2020 Ford Ranger, front right outer position. Part number TXMS406113 is a direct-fit steering component for drivers and fleets that need durable construction and straightforward serviceability.
Key Features
- Fits 2019-2020 Ford Ranger, front right outer
- Mevotech TTX line engineered for high-usage commercial, passenger, SUV, fleet, and work truck applications
- Pre-greased for initial service readiness
- Greaseable design with grease fitting included
- Dust boot included with neoprene boot material and green boot color
- Castle nut, cotter pin, and mounting hardware included
- Male end 1 and female end 2 configuration
- Sintered metal bearing material and threaded stud type
- Non-adjustable design
Detailed Description
TXMS406113 is a Mevotech TTX steering tie rod end designed for the front right outer steering position on the Ford Ranger. It uses a sintered metal bearing, threaded stud, and neoprene dust boot to support steering joint durability in demanding service conditions. The part arrives pre-greased and includes a grease fitting for future maintenance, along with the castle nut, cotter pin, dust boot, and mounting hardware needed for the job.
Mevotech TTX parts are positioned for vehicles that see frequent use, including work trucks and fleet units. This part cross-references Ford OE numbers 19531579 and KB3Z3A130B for the same application. TXMS406113 is also listed under Mevotech TTX TXMS406113.
Common Repair Uses
- Loose or worn steering response at the front right outer tie rod end
- Steering play caused by joint wear
- Boot damage that can expose the joint to contamination
- Maintenance replacement on a 2019-2020 Ford Ranger steering system
- Service work requiring a greaseable outer tie rod end
Installation Notes
Install TXMS406113 at the front right outer steering position on the 2019-2020 Ford Ranger. Verify thread direction, torque fasteners to the vehicle service specification, and align the front end after replacement. Because this is a non-adjustable tie rod end, confirm the correct side and position before installation. Part number TXMS406113 should be matched to the vehicle application before service begins.
Quality Assurance
Mevotech TTX components are engineered for demanding steering applications and built with service-focused features that support easier installation and maintenance. TXMS406113 follows that product-line approach with included service hardware, a greaseable joint, and protective boot construction for the Ford Ranger platform.
Mevotech TTX Steering Tie Rod End for Ford Ranger
The Mevotech TTX steering tie rod end is built for demanding steering service on the 2019-2020 Ford Ranger, front right outer position. Part number TXMS406113 is a direct-fit steering component for drivers and fleets that need durable construction and straightforward serviceability.
Key Features
- Fits 2019-2020 Ford Ranger, front right outer
- Mevotech TTX line engineered for high-usage commercial, passenger, SUV, fleet, and work truck applications
- Pre-greased for initial service readiness
- Greaseable design with grease fitting included
- Dust boot included with neoprene boot material and green boot color
- Castle nut, cotter pin, and mounting hardware included
- Male end 1 and female end 2 configuration
- Sintered metal bearing material and threaded stud type
- Non-adjustable design
Detailed Description
TXMS406113 is a Mevotech TTX steering tie rod end designed for the front right outer steering position on the Ford Ranger. It uses a sintered metal bearing, threaded stud, and neoprene dust boot to support steering joint durability in demanding service conditions. The part arrives pre-greased and includes a grease fitting for future maintenance, along with the castle nut, cotter pin, dust boot, and mounting hardware needed for the job.
Mevotech TTX parts are positioned for vehicles that see frequent use, including work trucks and fleet units. This part cross-references Ford OE numbers 19531579 and KB3Z3A130B for the same application. TXMS406113 is also listed under Mevotech TTX TXMS406113.
Common Repair Uses
- Loose or worn steering response at the front right outer tie rod end
- Steering play caused by joint wear
- Boot damage that can expose the joint to contamination
- Maintenance replacement on a 2019-2020 Ford Ranger steering system
- Service work requiring a greaseable outer tie rod end
Installation Notes
Install TXMS406113 at the front right outer steering position on the 2019-2020 Ford Ranger. Verify thread direction, torque fasteners to the vehicle service specification, and align the front end after replacement. Because this is a non-adjustable tie rod end, confirm the correct side and position before installation. Part number TXMS406113 should be matched to the vehicle application before service begins.
Quality Assurance
Mevotech TTX components are engineered for demanding steering applications and built with service-focused features that support easier installation and maintenance. TXMS406113 follows that product-line approach with included service hardware, a greaseable joint, and protective boot construction for the Ford Ranger platform.
Original: $68.70
-65%$68.70
$24.04Description
Mevotech TTX Steering Tie Rod End for Ford Ranger
The Mevotech TTX steering tie rod end is built for demanding steering service on the 2019-2020 Ford Ranger, front right outer position. Part number TXMS406113 is a direct-fit steering component for drivers and fleets that need durable construction and straightforward serviceability.
Key Features
- Fits 2019-2020 Ford Ranger, front right outer
- Mevotech TTX line engineered for high-usage commercial, passenger, SUV, fleet, and work truck applications
- Pre-greased for initial service readiness
- Greaseable design with grease fitting included
- Dust boot included with neoprene boot material and green boot color
- Castle nut, cotter pin, and mounting hardware included
- Male end 1 and female end 2 configuration
- Sintered metal bearing material and threaded stud type
- Non-adjustable design
Detailed Description
TXMS406113 is a Mevotech TTX steering tie rod end designed for the front right outer steering position on the Ford Ranger. It uses a sintered metal bearing, threaded stud, and neoprene dust boot to support steering joint durability in demanding service conditions. The part arrives pre-greased and includes a grease fitting for future maintenance, along with the castle nut, cotter pin, dust boot, and mounting hardware needed for the job.
Mevotech TTX parts are positioned for vehicles that see frequent use, including work trucks and fleet units. This part cross-references Ford OE numbers 19531579 and KB3Z3A130B for the same application. TXMS406113 is also listed under Mevotech TTX TXMS406113.
Common Repair Uses
- Loose or worn steering response at the front right outer tie rod end
- Steering play caused by joint wear
- Boot damage that can expose the joint to contamination
- Maintenance replacement on a 2019-2020 Ford Ranger steering system
- Service work requiring a greaseable outer tie rod end
Installation Notes
Install TXMS406113 at the front right outer steering position on the 2019-2020 Ford Ranger. Verify thread direction, torque fasteners to the vehicle service specification, and align the front end after replacement. Because this is a non-adjustable tie rod end, confirm the correct side and position before installation. Part number TXMS406113 should be matched to the vehicle application before service begins.
Quality Assurance
Mevotech TTX components are engineered for demanding steering applications and built with service-focused features that support easier installation and maintenance. TXMS406113 follows that product-line approach with included service hardware, a greaseable joint, and protective boot construction for the Ford Ranger platform.
