Mevotech MS908148 Suspension Stabilizer Bar Bushing Kit - Rear
Rear Stabilizer Bar Bushing Kit for Select Hyundai and Kia
Mevotech MS908148 is a rear suspension stabilizer bar bushing kit built with rubber bushings for specific Hyundai and Kia applications. It supports the rear sway bar connection point to help maintain consistent suspension response and reduce unwanted movement at the bar mount.
Compatible with select Hyundai Elantra, Sonata, Tucson, Veloster and Kia Optima, Sportage, Soul EV rear applications, this kit is a direct-fit service part for vehicles listed below. Mevotech MS908148 is also cross-referenced to MOOG Chassis Products K202014 for the same application.
Key Features
- Part number: MS908148
- Rear suspension stabilizer bar bushing kit
- Rubber construction for the bushing material
- Black finish
- Includes 2 bushings
- Approximate dimensions: 1.73 in length, 1.5 in width, 1.5 in height
- Inside diameter: 0.53 in
- Fits rear suspension service applications on select Hyundai and Kia models
Detailed Description
Mevotech MS908148 is a rear stabilizer bar bushing kit engineered for vehicles that use a 0.53-inch inside diameter bushing and a compact rubber mount profile. The rubber material helps restore a secure interface between the stabilizer bar and its mounting point, which is important for maintaining predictable rear suspension behavior. This part number is used on select Hyundai Elantra, Sonata, Tucson, Veloster and Kia Optima, Sportage, Soul EV rear applications, making it a practical replacement when servicing worn sway bar bushings.
This part cross-references MOOG Chassis Products K202014 for the same application.
Vehicle Fitment
- Fits 2022-2023 Kia Soul EV, rear. Battery Capacity Hv Type - Battery Hv Economy.
- Fits 2021 Kia Soul EV, rear. Battery Capacity Hv Type - Battery Hv Ec.
- Fits 2020 Kia Soul EV, rear.
- Fits 2019-2021 Hyundai Veloster, rear.
- Fits 2017-2018 Hyundai Elantra, rear.
- Fits 2013-2015 Hyundai Tucson, rear.
- Fits 2014-2015 Kia Sportage, rear.
- Fits 2011-2014 Hyundai Sonata, rear. For vehicle without Tuning mode - Sporty suspension.
- Fits 2011-2013 Kia Optima, rear.
Common Repair Uses
- Rear sway bar bushing wear
- Excess movement or looseness at the stabilizer bar mount
- Clunking or rattling from worn rear suspension bushings
- Reduced rear suspension stability from deteriorated rubber bushings
- Service replacement for Hyundai and Kia rear stabilizer bar mounting points
Installation Notes and Tips
Verify rear position and match the bushing inside diameter to the stabilizer bar before installation. Confirm vehicle configuration details, including the Sonata note for vehicles without Tuning mode - Sporty suspension and the Soul EV battery-capacity notes, before ordering. Inspect the stabilizer bar and mounting surfaces for wear or corrosion during service so the new bushings seat properly.
Quality Assurance
Mevotech suspension components are built for chassis service applications and are cataloged for direct replacement use on the listed Hyundai and Kia vehicles. Part number MS908148 is specified for rear stabilizer bar bushing service on the confirmed fitments above.
Rear Stabilizer Bar Bushing Kit for Select Hyundai and Kia
Mevotech MS908148 is a rear suspension stabilizer bar bushing kit built with rubber bushings for specific Hyundai and Kia applications. It supports the rear sway bar connection point to help maintain consistent suspension response and reduce unwanted movement at the bar mount.
Compatible with select Hyundai Elantra, Sonata, Tucson, Veloster and Kia Optima, Sportage, Soul EV rear applications, this kit is a direct-fit service part for vehicles listed below. Mevotech MS908148 is also cross-referenced to MOOG Chassis Products K202014 for the same application.
Key Features
- Part number: MS908148
- Rear suspension stabilizer bar bushing kit
- Rubber construction for the bushing material
- Black finish
- Includes 2 bushings
- Approximate dimensions: 1.73 in length, 1.5 in width, 1.5 in height
- Inside diameter: 0.53 in
- Fits rear suspension service applications on select Hyundai and Kia models
Detailed Description
Mevotech MS908148 is a rear stabilizer bar bushing kit engineered for vehicles that use a 0.53-inch inside diameter bushing and a compact rubber mount profile. The rubber material helps restore a secure interface between the stabilizer bar and its mounting point, which is important for maintaining predictable rear suspension behavior. This part number is used on select Hyundai Elantra, Sonata, Tucson, Veloster and Kia Optima, Sportage, Soul EV rear applications, making it a practical replacement when servicing worn sway bar bushings.
This part cross-references MOOG Chassis Products K202014 for the same application.
Vehicle Fitment
- Fits 2022-2023 Kia Soul EV, rear. Battery Capacity Hv Type - Battery Hv Economy.
- Fits 2021 Kia Soul EV, rear. Battery Capacity Hv Type - Battery Hv Ec.
- Fits 2020 Kia Soul EV, rear.
- Fits 2019-2021 Hyundai Veloster, rear.
- Fits 2017-2018 Hyundai Elantra, rear.
- Fits 2013-2015 Hyundai Tucson, rear.
- Fits 2014-2015 Kia Sportage, rear.
- Fits 2011-2014 Hyundai Sonata, rear. For vehicle without Tuning mode - Sporty suspension.
- Fits 2011-2013 Kia Optima, rear.
Common Repair Uses
- Rear sway bar bushing wear
- Excess movement or looseness at the stabilizer bar mount
- Clunking or rattling from worn rear suspension bushings
- Reduced rear suspension stability from deteriorated rubber bushings
- Service replacement for Hyundai and Kia rear stabilizer bar mounting points
Installation Notes and Tips
Verify rear position and match the bushing inside diameter to the stabilizer bar before installation. Confirm vehicle configuration details, including the Sonata note for vehicles without Tuning mode - Sporty suspension and the Soul EV battery-capacity notes, before ordering. Inspect the stabilizer bar and mounting surfaces for wear or corrosion during service so the new bushings seat properly.
Quality Assurance
Mevotech suspension components are built for chassis service applications and are cataloged for direct replacement use on the listed Hyundai and Kia vehicles. Part number MS908148 is specified for rear stabilizer bar bushing service on the confirmed fitments above.
Original: $23.29
-65%$23.29
$8.15Description
Rear Stabilizer Bar Bushing Kit for Select Hyundai and Kia
Mevotech MS908148 is a rear suspension stabilizer bar bushing kit built with rubber bushings for specific Hyundai and Kia applications. It supports the rear sway bar connection point to help maintain consistent suspension response and reduce unwanted movement at the bar mount.
Compatible with select Hyundai Elantra, Sonata, Tucson, Veloster and Kia Optima, Sportage, Soul EV rear applications, this kit is a direct-fit service part for vehicles listed below. Mevotech MS908148 is also cross-referenced to MOOG Chassis Products K202014 for the same application.
Key Features
- Part number: MS908148
- Rear suspension stabilizer bar bushing kit
- Rubber construction for the bushing material
- Black finish
- Includes 2 bushings
- Approximate dimensions: 1.73 in length, 1.5 in width, 1.5 in height
- Inside diameter: 0.53 in
- Fits rear suspension service applications on select Hyundai and Kia models
Detailed Description
Mevotech MS908148 is a rear stabilizer bar bushing kit engineered for vehicles that use a 0.53-inch inside diameter bushing and a compact rubber mount profile. The rubber material helps restore a secure interface between the stabilizer bar and its mounting point, which is important for maintaining predictable rear suspension behavior. This part number is used on select Hyundai Elantra, Sonata, Tucson, Veloster and Kia Optima, Sportage, Soul EV rear applications, making it a practical replacement when servicing worn sway bar bushings.
This part cross-references MOOG Chassis Products K202014 for the same application.
Vehicle Fitment
- Fits 2022-2023 Kia Soul EV, rear. Battery Capacity Hv Type - Battery Hv Economy.
- Fits 2021 Kia Soul EV, rear. Battery Capacity Hv Type - Battery Hv Ec.
- Fits 2020 Kia Soul EV, rear.
- Fits 2019-2021 Hyundai Veloster, rear.
- Fits 2017-2018 Hyundai Elantra, rear.
- Fits 2013-2015 Hyundai Tucson, rear.
- Fits 2014-2015 Kia Sportage, rear.
- Fits 2011-2014 Hyundai Sonata, rear. For vehicle without Tuning mode - Sporty suspension.
- Fits 2011-2013 Kia Optima, rear.
Common Repair Uses
- Rear sway bar bushing wear
- Excess movement or looseness at the stabilizer bar mount
- Clunking or rattling from worn rear suspension bushings
- Reduced rear suspension stability from deteriorated rubber bushings
- Service replacement for Hyundai and Kia rear stabilizer bar mounting points
Installation Notes and Tips
Verify rear position and match the bushing inside diameter to the stabilizer bar before installation. Confirm vehicle configuration details, including the Sonata note for vehicles without Tuning mode - Sporty suspension and the Soul EV battery-capacity notes, before ordering. Inspect the stabilizer bar and mounting surfaces for wear or corrosion during service so the new bushings seat properly.
Quality Assurance
Mevotech suspension components are built for chassis service applications and are cataloged for direct replacement use on the listed Hyundai and Kia vehicles. Part number MS908148 is specified for rear stabilizer bar bushing service on the confirmed fitments above.
