Mevotech MS500330 Alignment Cam Bolt Kit - Rear
Rear Camber Adjustment for Select GM Vehicles
Mevotech MS500330 is a rear alignment cam bolt kit for vehicles that need camber correction during suspension service or wheel alignment. It includes a hexagonal bolt, nut, and grease fitting, with a silver finish and M14 x 2.0 thread size for the listed applications.
Fits 2018-2022 Buick Enclave, rear. Fits 2020-2022 Cadillac CT4, rear. Fits 2020-2022 Cadillac CT5, rear. Fits 2017-2022 Cadillac XT5, rear. Fits 2020-2022 Cadillac XT6, rear. Fits 2019-2022 Chevrolet Blazer, rear. Fits 2016-2022 Chevrolet Camaro, rear. Fits 2018-2022 Chevrolet Equinox, rear. Fits 2018-2022 Chevrolet Traverse, rear. Fits 2017-2022 GMC Acadia, rear. Fits 2016-2019 Cadillac CTS, rear.
- Alignment cam bolt kit for rear camber adjustment
- Hexagonal bolt head for standard service-tool engagement
- Adjustment type: camber
- Nut included
- Grease fitting included
- Bolt length: 3.975 in.
- Thread size: M14 - 2.0
- Silver finish
Detailed Product Information
This Mevotech alignment cam bolt kit is used to restore or fine-tune rear camber settings on the listed Buick, Cadillac, Chevrolet, and GMC models. The cam-style design provides an adjustment range of +/-1.5 degree camber on the specified rear suspension applications, making it a direct service part for alignment correction after suspension work or when factory settings are out of range. Part number MS500330 is also referenced as Mevotech Supreme MS500330 and cross-references OE number 19474588 for the same application.
Common Uses
- Rear camber out of specification after suspension repair
- Uneven tire wear caused by incorrect rear alignment
- Steering pull or handling imbalance related to rear geometry
- Need for camber correction on a Buick Enclave, Cadillac XT5, or Chevrolet Traverse rear suspension
- Alignment service on a Chevrolet Camaro, Cadillac CT5, or GMC Acadia rear axle
Installation Notes and Tips
Verify rear suspension fitment by year, make, and model before installation. Use the cam bolt and nut as specified for the vehicle application, and set camber during a professional wheel alignment. Because this kit includes a grease fitting, follow the service procedure for lubrication where applicable. Confirm bolt length and thread size match the original hardware before assembly.
Quality Assurance
Mevotech MS500330 is built as an alignment hardware service part for the listed rear applications and is identified under Mevotech Supreme MS500330. It is intended for use on the confirmed fitment vehicles shown above.
Rear Camber Adjustment for Select GM Vehicles
Mevotech MS500330 is a rear alignment cam bolt kit for vehicles that need camber correction during suspension service or wheel alignment. It includes a hexagonal bolt, nut, and grease fitting, with a silver finish and M14 x 2.0 thread size for the listed applications.
Fits 2018-2022 Buick Enclave, rear. Fits 2020-2022 Cadillac CT4, rear. Fits 2020-2022 Cadillac CT5, rear. Fits 2017-2022 Cadillac XT5, rear. Fits 2020-2022 Cadillac XT6, rear. Fits 2019-2022 Chevrolet Blazer, rear. Fits 2016-2022 Chevrolet Camaro, rear. Fits 2018-2022 Chevrolet Equinox, rear. Fits 2018-2022 Chevrolet Traverse, rear. Fits 2017-2022 GMC Acadia, rear. Fits 2016-2019 Cadillac CTS, rear.
- Alignment cam bolt kit for rear camber adjustment
- Hexagonal bolt head for standard service-tool engagement
- Adjustment type: camber
- Nut included
- Grease fitting included
- Bolt length: 3.975 in.
- Thread size: M14 - 2.0
- Silver finish
Detailed Product Information
This Mevotech alignment cam bolt kit is used to restore or fine-tune rear camber settings on the listed Buick, Cadillac, Chevrolet, and GMC models. The cam-style design provides an adjustment range of +/-1.5 degree camber on the specified rear suspension applications, making it a direct service part for alignment correction after suspension work or when factory settings are out of range. Part number MS500330 is also referenced as Mevotech Supreme MS500330 and cross-references OE number 19474588 for the same application.
Common Uses
- Rear camber out of specification after suspension repair
- Uneven tire wear caused by incorrect rear alignment
- Steering pull or handling imbalance related to rear geometry
- Need for camber correction on a Buick Enclave, Cadillac XT5, or Chevrolet Traverse rear suspension
- Alignment service on a Chevrolet Camaro, Cadillac CT5, or GMC Acadia rear axle
Installation Notes and Tips
Verify rear suspension fitment by year, make, and model before installation. Use the cam bolt and nut as specified for the vehicle application, and set camber during a professional wheel alignment. Because this kit includes a grease fitting, follow the service procedure for lubrication where applicable. Confirm bolt length and thread size match the original hardware before assembly.
Quality Assurance
Mevotech MS500330 is built as an alignment hardware service part for the listed rear applications and is identified under Mevotech Supreme MS500330. It is intended for use on the confirmed fitment vehicles shown above.
Original: $41.62
-65%$41.62
$14.57Description
Rear Camber Adjustment for Select GM Vehicles
Mevotech MS500330 is a rear alignment cam bolt kit for vehicles that need camber correction during suspension service or wheel alignment. It includes a hexagonal bolt, nut, and grease fitting, with a silver finish and M14 x 2.0 thread size for the listed applications.
Fits 2018-2022 Buick Enclave, rear. Fits 2020-2022 Cadillac CT4, rear. Fits 2020-2022 Cadillac CT5, rear. Fits 2017-2022 Cadillac XT5, rear. Fits 2020-2022 Cadillac XT6, rear. Fits 2019-2022 Chevrolet Blazer, rear. Fits 2016-2022 Chevrolet Camaro, rear. Fits 2018-2022 Chevrolet Equinox, rear. Fits 2018-2022 Chevrolet Traverse, rear. Fits 2017-2022 GMC Acadia, rear. Fits 2016-2019 Cadillac CTS, rear.
- Alignment cam bolt kit for rear camber adjustment
- Hexagonal bolt head for standard service-tool engagement
- Adjustment type: camber
- Nut included
- Grease fitting included
- Bolt length: 3.975 in.
- Thread size: M14 - 2.0
- Silver finish
Detailed Product Information
This Mevotech alignment cam bolt kit is used to restore or fine-tune rear camber settings on the listed Buick, Cadillac, Chevrolet, and GMC models. The cam-style design provides an adjustment range of +/-1.5 degree camber on the specified rear suspension applications, making it a direct service part for alignment correction after suspension work or when factory settings are out of range. Part number MS500330 is also referenced as Mevotech Supreme MS500330 and cross-references OE number 19474588 for the same application.
Common Uses
- Rear camber out of specification after suspension repair
- Uneven tire wear caused by incorrect rear alignment
- Steering pull or handling imbalance related to rear geometry
- Need for camber correction on a Buick Enclave, Cadillac XT5, or Chevrolet Traverse rear suspension
- Alignment service on a Chevrolet Camaro, Cadillac CT5, or GMC Acadia rear axle
Installation Notes and Tips
Verify rear suspension fitment by year, make, and model before installation. Use the cam bolt and nut as specified for the vehicle application, and set camber during a professional wheel alignment. Because this kit includes a grease fitting, follow the service procedure for lubrication where applicable. Confirm bolt length and thread size match the original hardware before assembly.
Quality Assurance
Mevotech MS500330 is built as an alignment hardware service part for the listed rear applications and is identified under Mevotech Supreme MS500330. It is intended for use on the confirmed fitment vehicles shown above.
