Mevotech MS104241 Suspension Control Arm Bushing - Front Lower Inner Rearward
Mevotech MS104241 Suspension Control Arm Bushing
Mevotech MS104241 is a press-in suspension control arm bushing made from natural rubber for front lower inner rearward locations. It is built for BMW applications that need a direct-fit replacement bushing with the correct dimensions and mounting style.
Compatible with select BMW X1, 328i xDrive, 335i xDrive, 328xi, 335xi, 325xi, and 330xi applications, this bushing supports precise suspension service on the front lower inner rearward control arm position. The Mevotech MS104241 part number is also referenced for cross-application lookup during suspension repair.
Key Features
- Natural rubber construction for suspension isolation
- Press-in mounting type for control arm service
- One bushing included per package
- Dimensions: 2.6 in. length, 0.48 in. inside diameter, 2.76 in. outside diameter
- Direct replacement format for front lower inner rearward control arm applications
- Mevotech MS104241 for BMW suspension repair
Detailed Description
Mevotech MS104241 is a suspension control arm bushing engineered for the front lower inner rearward position on select BMW vehicles. The natural rubber material is used to help maintain suspension compliance while preserving the fit and geometry required by the control arm assembly. With a press-in design and measured dimensions of 2.6 inches long, 0.48-inch inside diameter, and 2.76-inch outside diameter, this bushing is specified for service work where the original bushing has worn, cracked, or lost its proper fit. This part cross-references MOOG Chassis Products K201498 for the same application.
Compatible With 2012-2015 BMW X1, Front Lower Inner Rearward; 2009-2013 BMW 328i xDrive, Front Lower Inner Rearward; 2009-2013 BMW 335i xDrive, Front Lower Inner Rearward; 2007-2008 BMW 328xi, Front Lower Inner Rearward; 2007-2008 BMW 335xi, Front Lower Inner Rearward; 2006 BMW 325xi, Front Lower Inner Rearward; and 2006 BMW 330xi, Front Lower Inner Rearward.
What It Helps Address
- Clunking or knocking from a worn front suspension bushing
- Excessive play in the control arm mounting point
- Uneven steering response caused by deteriorated rubber
- Suspension noise during braking, turning, or road impacts
- Loss of original bushing fit due to age-related wear
Installation Notes and Tips
This is a press-in bushing, so proper removal and installation tools are required for service. Inspect the control arm and surrounding mounting surfaces before installation, and verify the bushing orientation and dimensions against the original part before pressing it into place. Confirm the vehicle position as front lower inner rearward before ordering or installing.
Quality Assurance
Mevotech supplies suspension components for repair applications that require accurate fitment and OE-style service dimensions. The MS104241 part number is listed with multiple interchange references, including Delphi TD1735W and Suspensia X05BU0005, to support parts matching during suspension maintenance.
Mevotech MS104241 Suspension Control Arm Bushing
Mevotech MS104241 is a press-in suspension control arm bushing made from natural rubber for front lower inner rearward locations. It is built for BMW applications that need a direct-fit replacement bushing with the correct dimensions and mounting style.
Compatible with select BMW X1, 328i xDrive, 335i xDrive, 328xi, 335xi, 325xi, and 330xi applications, this bushing supports precise suspension service on the front lower inner rearward control arm position. The Mevotech MS104241 part number is also referenced for cross-application lookup during suspension repair.
Key Features
- Natural rubber construction for suspension isolation
- Press-in mounting type for control arm service
- One bushing included per package
- Dimensions: 2.6 in. length, 0.48 in. inside diameter, 2.76 in. outside diameter
- Direct replacement format for front lower inner rearward control arm applications
- Mevotech MS104241 for BMW suspension repair
Detailed Description
Mevotech MS104241 is a suspension control arm bushing engineered for the front lower inner rearward position on select BMW vehicles. The natural rubber material is used to help maintain suspension compliance while preserving the fit and geometry required by the control arm assembly. With a press-in design and measured dimensions of 2.6 inches long, 0.48-inch inside diameter, and 2.76-inch outside diameter, this bushing is specified for service work where the original bushing has worn, cracked, or lost its proper fit. This part cross-references MOOG Chassis Products K201498 for the same application.
Compatible With 2012-2015 BMW X1, Front Lower Inner Rearward; 2009-2013 BMW 328i xDrive, Front Lower Inner Rearward; 2009-2013 BMW 335i xDrive, Front Lower Inner Rearward; 2007-2008 BMW 328xi, Front Lower Inner Rearward; 2007-2008 BMW 335xi, Front Lower Inner Rearward; 2006 BMW 325xi, Front Lower Inner Rearward; and 2006 BMW 330xi, Front Lower Inner Rearward.
What It Helps Address
- Clunking or knocking from a worn front suspension bushing
- Excessive play in the control arm mounting point
- Uneven steering response caused by deteriorated rubber
- Suspension noise during braking, turning, or road impacts
- Loss of original bushing fit due to age-related wear
Installation Notes and Tips
This is a press-in bushing, so proper removal and installation tools are required for service. Inspect the control arm and surrounding mounting surfaces before installation, and verify the bushing orientation and dimensions against the original part before pressing it into place. Confirm the vehicle position as front lower inner rearward before ordering or installing.
Quality Assurance
Mevotech supplies suspension components for repair applications that require accurate fitment and OE-style service dimensions. The MS104241 part number is listed with multiple interchange references, including Delphi TD1735W and Suspensia X05BU0005, to support parts matching during suspension maintenance.
Description
Mevotech MS104241 Suspension Control Arm Bushing
Mevotech MS104241 is a press-in suspension control arm bushing made from natural rubber for front lower inner rearward locations. It is built for BMW applications that need a direct-fit replacement bushing with the correct dimensions and mounting style.
Compatible with select BMW X1, 328i xDrive, 335i xDrive, 328xi, 335xi, 325xi, and 330xi applications, this bushing supports precise suspension service on the front lower inner rearward control arm position. The Mevotech MS104241 part number is also referenced for cross-application lookup during suspension repair.
Key Features
- Natural rubber construction for suspension isolation
- Press-in mounting type for control arm service
- One bushing included per package
- Dimensions: 2.6 in. length, 0.48 in. inside diameter, 2.76 in. outside diameter
- Direct replacement format for front lower inner rearward control arm applications
- Mevotech MS104241 for BMW suspension repair
Detailed Description
Mevotech MS104241 is a suspension control arm bushing engineered for the front lower inner rearward position on select BMW vehicles. The natural rubber material is used to help maintain suspension compliance while preserving the fit and geometry required by the control arm assembly. With a press-in design and measured dimensions of 2.6 inches long, 0.48-inch inside diameter, and 2.76-inch outside diameter, this bushing is specified for service work where the original bushing has worn, cracked, or lost its proper fit. This part cross-references MOOG Chassis Products K201498 for the same application.
Compatible With 2012-2015 BMW X1, Front Lower Inner Rearward; 2009-2013 BMW 328i xDrive, Front Lower Inner Rearward; 2009-2013 BMW 335i xDrive, Front Lower Inner Rearward; 2007-2008 BMW 328xi, Front Lower Inner Rearward; 2007-2008 BMW 335xi, Front Lower Inner Rearward; 2006 BMW 325xi, Front Lower Inner Rearward; and 2006 BMW 330xi, Front Lower Inner Rearward.
What It Helps Address
- Clunking or knocking from a worn front suspension bushing
- Excessive play in the control arm mounting point
- Uneven steering response caused by deteriorated rubber
- Suspension noise during braking, turning, or road impacts
- Loss of original bushing fit due to age-related wear
Installation Notes and Tips
This is a press-in bushing, so proper removal and installation tools are required for service. Inspect the control arm and surrounding mounting surfaces before installation, and verify the bushing orientation and dimensions against the original part before pressing it into place. Confirm the vehicle position as front lower inner rearward before ordering or installing.
Quality Assurance
Mevotech supplies suspension components for repair applications that require accurate fitment and OE-style service dimensions. The MS104241 part number is listed with multiple interchange references, including Delphi TD1735W and Suspensia X05BU0005, to support parts matching during suspension maintenance.
