Mevotech MK7304 Suspension Stabilizer Bar Link Bushing - Front
Mevotech MK7304 Stabilizer Bar Link Bushings
Restore a tighter front suspension connection with the Mevotech MK7304 suspension stabilizer bar link bushing set. These natural rubber bushings are built for the end link location and include the hardware needed for the job, making them a direct service part for select Chrysler and Dodge front suspension applications.
Compatible with front-end service on 1976-1989 Chrysler and Dodge models, including Chrysler Fifth Avenue, Imperial, New Yorker, LeBaron, Newport, and Dodge Aspen. The MK7304 is a practical replacement when worn sway bar link bushings create looseness, noise, or reduced steering feel.
Key Features
- Mevotech MK7304 suspension stabilizer bar link bushing set
- Natural rubber construction for a factory-style service replacement
- Black finish
- Inside diameter: 0.375 in.
- Outside diameter: 1.65 in.
- Width: 3.35 in.
- Height: 2.45 in.
- Design type: to end link
- Includes 2 bushings and hardware
Detailed Description
The Mevotech MK7304 is a front stabilizer bar link bushing kit engineered for end link service on select Chrysler and Dodge vehicles. Built from natural rubber, it provides the correct bushing dimensions for the suspension connection point and supports a secure fit at the sway bar link. This part cross-references MOOG Chassis Products K7304 for the same application.
Use MK7304 when servicing front suspension bushings on vehicles such as Chrysler Fifth Avenue, Chrysler Imperial, Chrysler New Yorker, Chrysler LeBaron, Chrysler Newport, and Dodge Aspen. The part number MK7304 is also a useful reference when searching for a front stabilizer bar link bushing replacement for these older Chrysler and Dodge platforms.
What It Helps Fix
- Front suspension clunking from worn stabilizer bar link bushings
- Excess play at the sway bar end link connection
- Rattles or looseness over bumps
- Reduced stability caused by deteriorated rubber bushings
- Service needs on aging Chrysler and Dodge front suspension components
Installation Notes and Tips
Install on the front stabilizer bar end link location only. Verify the vehicle application and note the fitment restriction: without repair sleeve. Confirm bushing dimensions before installation, and replace worn hardware or damaged link components as needed to maintain proper suspension alignment at the connection point.
- Fits 1983-1989 Chrysler Fifth Avenue, front
- Fits 1981-1983 Chrysler Imperial, front
- Fits 1979-1982 Chrysler New Yorker, front
- Fits 1977-1981 Chrysler LeBaron, front
- Fits 1979-1981 Chrysler Newport, front
- Fits 1976-1980 Dodge Aspen, front
Quality Assurance
Mevotech suspension service parts are built for direct-fit replacement use in listed applications. MK7304 is specified for confirmed front fitment on the vehicles shown above and is supplied as a two-bushing kit with hardware.
Mevotech MK7304 Stabilizer Bar Link Bushings
Restore a tighter front suspension connection with the Mevotech MK7304 suspension stabilizer bar link bushing set. These natural rubber bushings are built for the end link location and include the hardware needed for the job, making them a direct service part for select Chrysler and Dodge front suspension applications.
Compatible with front-end service on 1976-1989 Chrysler and Dodge models, including Chrysler Fifth Avenue, Imperial, New Yorker, LeBaron, Newport, and Dodge Aspen. The MK7304 is a practical replacement when worn sway bar link bushings create looseness, noise, or reduced steering feel.
Key Features
- Mevotech MK7304 suspension stabilizer bar link bushing set
- Natural rubber construction for a factory-style service replacement
- Black finish
- Inside diameter: 0.375 in.
- Outside diameter: 1.65 in.
- Width: 3.35 in.
- Height: 2.45 in.
- Design type: to end link
- Includes 2 bushings and hardware
Detailed Description
The Mevotech MK7304 is a front stabilizer bar link bushing kit engineered for end link service on select Chrysler and Dodge vehicles. Built from natural rubber, it provides the correct bushing dimensions for the suspension connection point and supports a secure fit at the sway bar link. This part cross-references MOOG Chassis Products K7304 for the same application.
Use MK7304 when servicing front suspension bushings on vehicles such as Chrysler Fifth Avenue, Chrysler Imperial, Chrysler New Yorker, Chrysler LeBaron, Chrysler Newport, and Dodge Aspen. The part number MK7304 is also a useful reference when searching for a front stabilizer bar link bushing replacement for these older Chrysler and Dodge platforms.
What It Helps Fix
- Front suspension clunking from worn stabilizer bar link bushings
- Excess play at the sway bar end link connection
- Rattles or looseness over bumps
- Reduced stability caused by deteriorated rubber bushings
- Service needs on aging Chrysler and Dodge front suspension components
Installation Notes and Tips
Install on the front stabilizer bar end link location only. Verify the vehicle application and note the fitment restriction: without repair sleeve. Confirm bushing dimensions before installation, and replace worn hardware or damaged link components as needed to maintain proper suspension alignment at the connection point.
- Fits 1983-1989 Chrysler Fifth Avenue, front
- Fits 1981-1983 Chrysler Imperial, front
- Fits 1979-1982 Chrysler New Yorker, front
- Fits 1977-1981 Chrysler LeBaron, front
- Fits 1979-1981 Chrysler Newport, front
- Fits 1976-1980 Dodge Aspen, front
Quality Assurance
Mevotech suspension service parts are built for direct-fit replacement use in listed applications. MK7304 is specified for confirmed front fitment on the vehicles shown above and is supplied as a two-bushing kit with hardware.
Original: $12.81
-65%$12.81
$4.48Description
Mevotech MK7304 Stabilizer Bar Link Bushings
Restore a tighter front suspension connection with the Mevotech MK7304 suspension stabilizer bar link bushing set. These natural rubber bushings are built for the end link location and include the hardware needed for the job, making them a direct service part for select Chrysler and Dodge front suspension applications.
Compatible with front-end service on 1976-1989 Chrysler and Dodge models, including Chrysler Fifth Avenue, Imperial, New Yorker, LeBaron, Newport, and Dodge Aspen. The MK7304 is a practical replacement when worn sway bar link bushings create looseness, noise, or reduced steering feel.
Key Features
- Mevotech MK7304 suspension stabilizer bar link bushing set
- Natural rubber construction for a factory-style service replacement
- Black finish
- Inside diameter: 0.375 in.
- Outside diameter: 1.65 in.
- Width: 3.35 in.
- Height: 2.45 in.
- Design type: to end link
- Includes 2 bushings and hardware
Detailed Description
The Mevotech MK7304 is a front stabilizer bar link bushing kit engineered for end link service on select Chrysler and Dodge vehicles. Built from natural rubber, it provides the correct bushing dimensions for the suspension connection point and supports a secure fit at the sway bar link. This part cross-references MOOG Chassis Products K7304 for the same application.
Use MK7304 when servicing front suspension bushings on vehicles such as Chrysler Fifth Avenue, Chrysler Imperial, Chrysler New Yorker, Chrysler LeBaron, Chrysler Newport, and Dodge Aspen. The part number MK7304 is also a useful reference when searching for a front stabilizer bar link bushing replacement for these older Chrysler and Dodge platforms.
What It Helps Fix
- Front suspension clunking from worn stabilizer bar link bushings
- Excess play at the sway bar end link connection
- Rattles or looseness over bumps
- Reduced stability caused by deteriorated rubber bushings
- Service needs on aging Chrysler and Dodge front suspension components
Installation Notes and Tips
Install on the front stabilizer bar end link location only. Verify the vehicle application and note the fitment restriction: without repair sleeve. Confirm bushing dimensions before installation, and replace worn hardware or damaged link components as needed to maintain proper suspension alignment at the connection point.
- Fits 1983-1989 Chrysler Fifth Avenue, front
- Fits 1981-1983 Chrysler Imperial, front
- Fits 1979-1982 Chrysler New Yorker, front
- Fits 1977-1981 Chrysler LeBaron, front
- Fits 1979-1981 Chrysler Newport, front
- Fits 1976-1980 Dodge Aspen, front
Quality Assurance
Mevotech suspension service parts are built for direct-fit replacement use in listed applications. MK7304 is specified for confirmed front fitment on the vehicles shown above and is supplied as a two-bushing kit with hardware.
