Mevotech MK6642 Suspension Stabilizer Bar Bushing Kit - Front To Frame
Mevotech MK6642 Stabilizer Bar Bushing Kit
Restore a tighter front suspension feel with the Mevotech MK6642 suspension stabilizer bar bushing kit. This front-to-frame bushing set is built with natural rubber and is sized for a stabilizer bar with a 22 mm or 7/8 in diameter, making it a direct-fit service part for select Chevrolet Corvette applications.
Fits 1984-1987 Chevrolet Corvette, Front To Frame. The Mevotech MK6642 is a practical replacement when the original sway bar bushings have worn, cracked, or hardened from age and road exposure.
Key Features
- Part number: MK6642
- Suspension stabilizer bar bushing kit for front-to-frame mounting
- Natural rubber construction
- Black finish
- Inside diameter: 0.866 in
- Outside diameter: 1.9 in
- Width: 3.35 in
- Length: 1.66 in
- Height: 2.45 in
- Includes 2 bushings
- Fits stabilizer bar with 22 mm or 7/8 in diameter
Detailed Description
Mevotech MK6642 is a suspension stabilizer bar bushing kit made for front-to-frame service on 1984-1987 Chevrolet Corvette models. The natural rubber material is selected for a traditional bushing feel and consistent bar support, while the listed dimensions help confirm proper sizing before installation. If you are searching for a Chevrolet Corvette front sway bar bushing replacement or a front stabilizer bar bushing kit for a 22 mm bar, MK6642 is the exact part number to reference.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. The MK6642 also appears in interchange listings under related numbers such as K6642, which can help when verifying a front stabilizer bar bushing kit for Corvette suspension repair. Use MK6642 when replacing worn bushings that can affect bar location and suspension response on the Chevrolet Corvette.
What It Helps Fix
- Clunking or squeaking from worn front stabilizer bar bushings
- Excessive play at the front sway bar mounting point
- Rubber cracking, flattening, or hardening from age
- Loose-feeling front suspension response on a Chevrolet Corvette
- Incorrect bar support caused by deteriorated frame-mounted bushings
Installation Notes and Tips
Confirm the stabilizer bar diameter before ordering; this kit is specified for a 22 mm or 7/8 in bar. Verify the front-to-frame mounting location and compare the listed dimensions to the original bushings on the vehicle. For best results, inspect the stabilizer bar surface for wear or corrosion before installing the new bushings.
Fits 1984 Chevrolet Corvette, Front To Frame. Fits 1985 Chevrolet Corvette, Front To Frame. Fits 1986 Chevrolet Corvette, Front To Frame. Fits 1987 Chevrolet Corvette, Front To Frame.
Quality Assurance
Mevotech suspension components are cataloged for direct replacement use, and MK6642 is listed with defined dimensions, material, and vehicle fitment for accurate application matching. Review the vehicle notes and bar diameter specification to confirm the correct front stabilizer bar bushing kit for your Corvette.
Mevotech MK6642 Stabilizer Bar Bushing Kit
Restore a tighter front suspension feel with the Mevotech MK6642 suspension stabilizer bar bushing kit. This front-to-frame bushing set is built with natural rubber and is sized for a stabilizer bar with a 22 mm or 7/8 in diameter, making it a direct-fit service part for select Chevrolet Corvette applications.
Fits 1984-1987 Chevrolet Corvette, Front To Frame. The Mevotech MK6642 is a practical replacement when the original sway bar bushings have worn, cracked, or hardened from age and road exposure.
Key Features
- Part number: MK6642
- Suspension stabilizer bar bushing kit for front-to-frame mounting
- Natural rubber construction
- Black finish
- Inside diameter: 0.866 in
- Outside diameter: 1.9 in
- Width: 3.35 in
- Length: 1.66 in
- Height: 2.45 in
- Includes 2 bushings
- Fits stabilizer bar with 22 mm or 7/8 in diameter
Detailed Description
Mevotech MK6642 is a suspension stabilizer bar bushing kit made for front-to-frame service on 1984-1987 Chevrolet Corvette models. The natural rubber material is selected for a traditional bushing feel and consistent bar support, while the listed dimensions help confirm proper sizing before installation. If you are searching for a Chevrolet Corvette front sway bar bushing replacement or a front stabilizer bar bushing kit for a 22 mm bar, MK6642 is the exact part number to reference.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. The MK6642 also appears in interchange listings under related numbers such as K6642, which can help when verifying a front stabilizer bar bushing kit for Corvette suspension repair. Use MK6642 when replacing worn bushings that can affect bar location and suspension response on the Chevrolet Corvette.
What It Helps Fix
- Clunking or squeaking from worn front stabilizer bar bushings
- Excessive play at the front sway bar mounting point
- Rubber cracking, flattening, or hardening from age
- Loose-feeling front suspension response on a Chevrolet Corvette
- Incorrect bar support caused by deteriorated frame-mounted bushings
Installation Notes and Tips
Confirm the stabilizer bar diameter before ordering; this kit is specified for a 22 mm or 7/8 in bar. Verify the front-to-frame mounting location and compare the listed dimensions to the original bushings on the vehicle. For best results, inspect the stabilizer bar surface for wear or corrosion before installing the new bushings.
Fits 1984 Chevrolet Corvette, Front To Frame. Fits 1985 Chevrolet Corvette, Front To Frame. Fits 1986 Chevrolet Corvette, Front To Frame. Fits 1987 Chevrolet Corvette, Front To Frame.
Quality Assurance
Mevotech suspension components are cataloged for direct replacement use, and MK6642 is listed with defined dimensions, material, and vehicle fitment for accurate application matching. Review the vehicle notes and bar diameter specification to confirm the correct front stabilizer bar bushing kit for your Corvette.
Description
Mevotech MK6642 Stabilizer Bar Bushing Kit
Restore a tighter front suspension feel with the Mevotech MK6642 suspension stabilizer bar bushing kit. This front-to-frame bushing set is built with natural rubber and is sized for a stabilizer bar with a 22 mm or 7/8 in diameter, making it a direct-fit service part for select Chevrolet Corvette applications.
Fits 1984-1987 Chevrolet Corvette, Front To Frame. The Mevotech MK6642 is a practical replacement when the original sway bar bushings have worn, cracked, or hardened from age and road exposure.
Key Features
- Part number: MK6642
- Suspension stabilizer bar bushing kit for front-to-frame mounting
- Natural rubber construction
- Black finish
- Inside diameter: 0.866 in
- Outside diameter: 1.9 in
- Width: 3.35 in
- Length: 1.66 in
- Height: 2.45 in
- Includes 2 bushings
- Fits stabilizer bar with 22 mm or 7/8 in diameter
Detailed Description
Mevotech MK6642 is a suspension stabilizer bar bushing kit made for front-to-frame service on 1984-1987 Chevrolet Corvette models. The natural rubber material is selected for a traditional bushing feel and consistent bar support, while the listed dimensions help confirm proper sizing before installation. If you are searching for a Chevrolet Corvette front sway bar bushing replacement or a front stabilizer bar bushing kit for a 22 mm bar, MK6642 is the exact part number to reference.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. The MK6642 also appears in interchange listings under related numbers such as K6642, which can help when verifying a front stabilizer bar bushing kit for Corvette suspension repair. Use MK6642 when replacing worn bushings that can affect bar location and suspension response on the Chevrolet Corvette.
What It Helps Fix
- Clunking or squeaking from worn front stabilizer bar bushings
- Excessive play at the front sway bar mounting point
- Rubber cracking, flattening, or hardening from age
- Loose-feeling front suspension response on a Chevrolet Corvette
- Incorrect bar support caused by deteriorated frame-mounted bushings
Installation Notes and Tips
Confirm the stabilizer bar diameter before ordering; this kit is specified for a 22 mm or 7/8 in bar. Verify the front-to-frame mounting location and compare the listed dimensions to the original bushings on the vehicle. For best results, inspect the stabilizer bar surface for wear or corrosion before installing the new bushings.
Fits 1984 Chevrolet Corvette, Front To Frame. Fits 1985 Chevrolet Corvette, Front To Frame. Fits 1986 Chevrolet Corvette, Front To Frame. Fits 1987 Chevrolet Corvette, Front To Frame.
Quality Assurance
Mevotech suspension components are cataloged for direct replacement use, and MK6642 is listed with defined dimensions, material, and vehicle fitment for accurate application matching. Review the vehicle notes and bar diameter specification to confirm the correct front stabilizer bar bushing kit for your Corvette.
