Mevotech MK6399 Suspension Stabilizer Bar Bushing Kit - Front To Frame
Mevotech MK6399 Front Stabilizer Bar Bushings
Restore a tighter connection between the front stabilizer bar and the frame with the Mevotech MK6399 suspension stabilizer bar bushing kit. This kit uses natural rubber bushings in a black finish and is built for front-to-frame mounting on a range of GM compact and midsize cars, including Buick Skylark, Pontiac Grand Am, and Chevrolet Cavalier applications.
Key Features
- Part number MK6399 suspension stabilizer bar bushing kit
- Natural rubber construction for the stabilizer bar-to-frame interface
- Black finish
- 2 bushings included
- Inside diameter: 0.99 in.
- Outside diameter: 1.79 in.
- Width: 3.35 in.
- Height: 2.45 in.
- Length: 1.8 in.
- Front to frame design type
Detailed Description
The Mevotech MK6399 is a suspension stabilizer bar bushing kit made for front-to-frame mounting locations. It uses natural rubber to isolate the stabilizer bar from the frame while maintaining the correct bar location for vehicles equipped with a 26 mm or 1-1/32 in. suspension stabilizer bar diameter. This part number MK6399 is listed for applications such as 1994-1998 Buick Skylark, 1986-1998 Pontiac Grand Am, and 1986-1994 Chevrolet Cavalier, along with additional GM platforms in the fitment list.
This part cross-references Delphi TD5610W for the same application.
What It Helps Address
- Front sway bar clunking over bumps
- Excessive stabilizer bar movement at the frame mount
- Worn or cracked rubber bushings
- Loose-feeling front suspension response
- Noise caused by deteriorated stabilizer bar isolation
Installation Notes and Tips
Verify the stabilizer bar diameter before ordering; this kit is specified for 26 mm or 1-1/32 in. bars. Confirm front-to-frame mounting and compare the original bushing dimensions to the listed measurements before installation. For fitment, this MK6399 kit is used on vehicles such as 1994-1998 Buick Skylark, front to frame; 1992-1998 Oldsmobile Achieva, front to frame; 1986-1998 Pontiac Grand Am, front to frame; 1987-1996 Chevrolet Corsica, front to frame; 1986-1994 Chevrolet Cavalier, front to frame; 1986-1994 Pontiac Sunbird, front to frame; 1988-1991 Oldsmobile Cutlass Calais, front to frame; 1986-1989 Buick Skyhawk, front to frame; 1986-1988 Cadillac Cimarron, front to frame; 1986-1988 Oldsmobile Firenza, front to frame; and 1986-1987 Oldsmobile Calais, front to frame.
Quality Assurance
Mevotech supplies suspension components for service replacement applications, and the MK6399 is built to match the listed dimensions and fitment requirements for the specified GM vehicles.
Mevotech MK6399 Front Stabilizer Bar Bushings
Restore a tighter connection between the front stabilizer bar and the frame with the Mevotech MK6399 suspension stabilizer bar bushing kit. This kit uses natural rubber bushings in a black finish and is built for front-to-frame mounting on a range of GM compact and midsize cars, including Buick Skylark, Pontiac Grand Am, and Chevrolet Cavalier applications.
Key Features
- Part number MK6399 suspension stabilizer bar bushing kit
- Natural rubber construction for the stabilizer bar-to-frame interface
- Black finish
- 2 bushings included
- Inside diameter: 0.99 in.
- Outside diameter: 1.79 in.
- Width: 3.35 in.
- Height: 2.45 in.
- Length: 1.8 in.
- Front to frame design type
Detailed Description
The Mevotech MK6399 is a suspension stabilizer bar bushing kit made for front-to-frame mounting locations. It uses natural rubber to isolate the stabilizer bar from the frame while maintaining the correct bar location for vehicles equipped with a 26 mm or 1-1/32 in. suspension stabilizer bar diameter. This part number MK6399 is listed for applications such as 1994-1998 Buick Skylark, 1986-1998 Pontiac Grand Am, and 1986-1994 Chevrolet Cavalier, along with additional GM platforms in the fitment list.
This part cross-references Delphi TD5610W for the same application.
What It Helps Address
- Front sway bar clunking over bumps
- Excessive stabilizer bar movement at the frame mount
- Worn or cracked rubber bushings
- Loose-feeling front suspension response
- Noise caused by deteriorated stabilizer bar isolation
Installation Notes and Tips
Verify the stabilizer bar diameter before ordering; this kit is specified for 26 mm or 1-1/32 in. bars. Confirm front-to-frame mounting and compare the original bushing dimensions to the listed measurements before installation. For fitment, this MK6399 kit is used on vehicles such as 1994-1998 Buick Skylark, front to frame; 1992-1998 Oldsmobile Achieva, front to frame; 1986-1998 Pontiac Grand Am, front to frame; 1987-1996 Chevrolet Corsica, front to frame; 1986-1994 Chevrolet Cavalier, front to frame; 1986-1994 Pontiac Sunbird, front to frame; 1988-1991 Oldsmobile Cutlass Calais, front to frame; 1986-1989 Buick Skyhawk, front to frame; 1986-1988 Cadillac Cimarron, front to frame; 1986-1988 Oldsmobile Firenza, front to frame; and 1986-1987 Oldsmobile Calais, front to frame.
Quality Assurance
Mevotech supplies suspension components for service replacement applications, and the MK6399 is built to match the listed dimensions and fitment requirements for the specified GM vehicles.
Description
Mevotech MK6399 Front Stabilizer Bar Bushings
Restore a tighter connection between the front stabilizer bar and the frame with the Mevotech MK6399 suspension stabilizer bar bushing kit. This kit uses natural rubber bushings in a black finish and is built for front-to-frame mounting on a range of GM compact and midsize cars, including Buick Skylark, Pontiac Grand Am, and Chevrolet Cavalier applications.
Key Features
- Part number MK6399 suspension stabilizer bar bushing kit
- Natural rubber construction for the stabilizer bar-to-frame interface
- Black finish
- 2 bushings included
- Inside diameter: 0.99 in.
- Outside diameter: 1.79 in.
- Width: 3.35 in.
- Height: 2.45 in.
- Length: 1.8 in.
- Front to frame design type
Detailed Description
The Mevotech MK6399 is a suspension stabilizer bar bushing kit made for front-to-frame mounting locations. It uses natural rubber to isolate the stabilizer bar from the frame while maintaining the correct bar location for vehicles equipped with a 26 mm or 1-1/32 in. suspension stabilizer bar diameter. This part number MK6399 is listed for applications such as 1994-1998 Buick Skylark, 1986-1998 Pontiac Grand Am, and 1986-1994 Chevrolet Cavalier, along with additional GM platforms in the fitment list.
This part cross-references Delphi TD5610W for the same application.
What It Helps Address
- Front sway bar clunking over bumps
- Excessive stabilizer bar movement at the frame mount
- Worn or cracked rubber bushings
- Loose-feeling front suspension response
- Noise caused by deteriorated stabilizer bar isolation
Installation Notes and Tips
Verify the stabilizer bar diameter before ordering; this kit is specified for 26 mm or 1-1/32 in. bars. Confirm front-to-frame mounting and compare the original bushing dimensions to the listed measurements before installation. For fitment, this MK6399 kit is used on vehicles such as 1994-1998 Buick Skylark, front to frame; 1992-1998 Oldsmobile Achieva, front to frame; 1986-1998 Pontiac Grand Am, front to frame; 1987-1996 Chevrolet Corsica, front to frame; 1986-1994 Chevrolet Cavalier, front to frame; 1986-1994 Pontiac Sunbird, front to frame; 1988-1991 Oldsmobile Cutlass Calais, front to frame; 1986-1989 Buick Skyhawk, front to frame; 1986-1988 Cadillac Cimarron, front to frame; 1986-1988 Oldsmobile Firenza, front to frame; and 1986-1987 Oldsmobile Calais, front to frame.
Quality Assurance
Mevotech supplies suspension components for service replacement applications, and the MK6399 is built to match the listed dimensions and fitment requirements for the specified GM vehicles.
