Mevotech CTXMS251220 Suspension Control Arm and Ball Joint Assembly - Front Left Lower
Mevotech TTX Front Left Lower Control Arm
The Mevotech TTX CTXMS251220 is a front left lower suspension control arm and ball joint assembly built for demanding service on Jeep Compass, Jeep Renegade, and Fiat 500X applications. It combines a steel arm, pre-greased serviceable components, and upgraded bushings for direct replacement performance in high-use vehicles.
Key Features
- Part number CTXMS251220 for the front left lower position
- Steel control arm with a gold finish
- Ball joint included with bolt-in mounting type
- Pre-greased and greaseable design with grease fitting included
- Bushings included with rubber bushing material
- Dust boot included with neoprene boot material
- Mounting hardware and locking nut included
- Grooved ball joint stud and sintered metal bearing material
Detailed Description
Mevotech TTX suspension components are engineered for heavy-duty use in passenger vehicles, SUVs, fleets, and working trucks. The CTXMS251220 control arm assembly uses reinforced construction and upgraded bushings to handle repeated load cycles while maintaining precise front suspension geometry. For shoppers searching for a Jeep Compass front left lower control arm, Jeep Renegade suspension control arm assembly, or Fiat 500X lower control arm with ball joint, this part number CTXMS251220 provides a direct-fit replacement solution.
This part cross-references MOOG Chassis Products (e.g., RK623773, RK623777) for the same application.
Vehicle Fitment
- Fits 2017-2025 Jeep Compass, Front Left Lower. Notes: Extreme Durability; Patented Technology; Greaseable; Reinforced Design and Upgraded Bushings; Hardware Included.
- Fits 2016-2023 Fiat 500X, Front Left Lower. Notes: Extreme Durability; Patented Technology; Greaseable; Reinforced Design and Upgraded Bushings; Hardware Included.
- Fits 2015-2023 Jeep Renegade, Front Left Lower. Notes: Extreme Durability; Patented Technology; Greaseable; Reinforced Design and Upgraded Bushings; Hardware Included.
Installation Notes and Tips
Confirm the front left lower position before installation and compare the original arm, ball joint style, and mounting points to the replacement. Because this assembly is greaseable and includes a grease fitting, service the joint after installation according to the vehicle maintenance schedule. Use the included mounting hardware and locking nut, and verify final torque specifications with the vehicle service information.
Quality Assurance
Mevotech TTX parts are built with reinforced materials and service-friendly features for demanding suspension service. The CTXMS251220 is pre-greased, includes a dust boot, and uses upgraded bushings and a bolt-in ball joint design to support consistent replacement quality.
Mevotech TTX Front Left Lower Control Arm
The Mevotech TTX CTXMS251220 is a front left lower suspension control arm and ball joint assembly built for demanding service on Jeep Compass, Jeep Renegade, and Fiat 500X applications. It combines a steel arm, pre-greased serviceable components, and upgraded bushings for direct replacement performance in high-use vehicles.
Key Features
- Part number CTXMS251220 for the front left lower position
- Steel control arm with a gold finish
- Ball joint included with bolt-in mounting type
- Pre-greased and greaseable design with grease fitting included
- Bushings included with rubber bushing material
- Dust boot included with neoprene boot material
- Mounting hardware and locking nut included
- Grooved ball joint stud and sintered metal bearing material
Detailed Description
Mevotech TTX suspension components are engineered for heavy-duty use in passenger vehicles, SUVs, fleets, and working trucks. The CTXMS251220 control arm assembly uses reinforced construction and upgraded bushings to handle repeated load cycles while maintaining precise front suspension geometry. For shoppers searching for a Jeep Compass front left lower control arm, Jeep Renegade suspension control arm assembly, or Fiat 500X lower control arm with ball joint, this part number CTXMS251220 provides a direct-fit replacement solution.
This part cross-references MOOG Chassis Products (e.g., RK623773, RK623777) for the same application.
Vehicle Fitment
- Fits 2017-2025 Jeep Compass, Front Left Lower. Notes: Extreme Durability; Patented Technology; Greaseable; Reinforced Design and Upgraded Bushings; Hardware Included.
- Fits 2016-2023 Fiat 500X, Front Left Lower. Notes: Extreme Durability; Patented Technology; Greaseable; Reinforced Design and Upgraded Bushings; Hardware Included.
- Fits 2015-2023 Jeep Renegade, Front Left Lower. Notes: Extreme Durability; Patented Technology; Greaseable; Reinforced Design and Upgraded Bushings; Hardware Included.
Installation Notes and Tips
Confirm the front left lower position before installation and compare the original arm, ball joint style, and mounting points to the replacement. Because this assembly is greaseable and includes a grease fitting, service the joint after installation according to the vehicle maintenance schedule. Use the included mounting hardware and locking nut, and verify final torque specifications with the vehicle service information.
Quality Assurance
Mevotech TTX parts are built with reinforced materials and service-friendly features for demanding suspension service. The CTXMS251220 is pre-greased, includes a dust boot, and uses upgraded bushings and a bolt-in ball joint design to support consistent replacement quality.
Description
Mevotech TTX Front Left Lower Control Arm
The Mevotech TTX CTXMS251220 is a front left lower suspension control arm and ball joint assembly built for demanding service on Jeep Compass, Jeep Renegade, and Fiat 500X applications. It combines a steel arm, pre-greased serviceable components, and upgraded bushings for direct replacement performance in high-use vehicles.
Key Features
- Part number CTXMS251220 for the front left lower position
- Steel control arm with a gold finish
- Ball joint included with bolt-in mounting type
- Pre-greased and greaseable design with grease fitting included
- Bushings included with rubber bushing material
- Dust boot included with neoprene boot material
- Mounting hardware and locking nut included
- Grooved ball joint stud and sintered metal bearing material
Detailed Description
Mevotech TTX suspension components are engineered for heavy-duty use in passenger vehicles, SUVs, fleets, and working trucks. The CTXMS251220 control arm assembly uses reinforced construction and upgraded bushings to handle repeated load cycles while maintaining precise front suspension geometry. For shoppers searching for a Jeep Compass front left lower control arm, Jeep Renegade suspension control arm assembly, or Fiat 500X lower control arm with ball joint, this part number CTXMS251220 provides a direct-fit replacement solution.
This part cross-references MOOG Chassis Products (e.g., RK623773, RK623777) for the same application.
Vehicle Fitment
- Fits 2017-2025 Jeep Compass, Front Left Lower. Notes: Extreme Durability; Patented Technology; Greaseable; Reinforced Design and Upgraded Bushings; Hardware Included.
- Fits 2016-2023 Fiat 500X, Front Left Lower. Notes: Extreme Durability; Patented Technology; Greaseable; Reinforced Design and Upgraded Bushings; Hardware Included.
- Fits 2015-2023 Jeep Renegade, Front Left Lower. Notes: Extreme Durability; Patented Technology; Greaseable; Reinforced Design and Upgraded Bushings; Hardware Included.
Installation Notes and Tips
Confirm the front left lower position before installation and compare the original arm, ball joint style, and mounting points to the replacement. Because this assembly is greaseable and includes a grease fitting, service the joint after installation according to the vehicle maintenance schedule. Use the included mounting hardware and locking nut, and verify final torque specifications with the vehicle service information.
Quality Assurance
Mevotech TTX parts are built with reinforced materials and service-friendly features for demanding suspension service. The CTXMS251220 is pre-greased, includes a dust boot, and uses upgraded bushings and a bolt-in ball joint design to support consistent replacement quality.
