Mevotech CMS901280 Suspension Control Arm and Ball Joint Assembly - Front Left Lower
Front Left Lower Control Arm Assembly
Mevotech CMS901280 is a suspension control arm and ball joint assembly for the front left lower position on select Hyundai and Kia EV and hybrid applications. It combines an aluminum control arm with a pre-greased ball joint, rubber bushings, and a dust boot for a direct OE-style replacement.
Built for the 2017-2023 Hyundai Ioniq, 2017-2022 Kia Niro, 2019-2022 Kia Niro EV, 2019-2023 Hyundai Kona Electric, and 2020-2023 Kia Soul EV, this assembly is engineered for vehicles that see regular road use and higher service demands. The CMS901280 part number is also listed under related aftermarket references for the same application.
Key Features
- Aluminum control arm construction with silver finish
- Pre-greased ball joint included
- Rubber bushings and rubber dust boot included
- Threaded ball joint stud with castle nut and cotter pin included
- Mounting hardware included
- Non-adjustable design for direct replacement service
- Mevotech Supreme Parts engineering for application-specific durability upgrades
- Labor Saver design elements for faster installation
Detailed Description
Mevotech Supreme CMS901280 is engineered in-house as a front left lower suspension control arm and ball joint assembly for select Hyundai Kona Electric, Kia Soul EV, Hyundai Ioniq, Kia Niro, and Kia Niro EV models. The aluminum arm helps reduce weight while maintaining the structure needed for suspension control, and the included ball joint, bushings, dust boot, castle nut, cotter pin, and mounting hardware support a complete service replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Use CMS901280 when replacing a worn front left lower control arm on 2017-2023 Hyundai and Kia electrified platforms where OE-style geometry and service-ready components matter. The CMS901280 part number is a direct reference for this assembly.
What This Part Helps Address
- Clunking or knocking from the front left lower suspension
- Excessive play from a worn ball joint
- Cracked or deteriorated control arm bushings
- Uneven tire wear caused by suspension looseness
- Steering instability or wandering from worn lower arm components
Installation Notes and Tips
Install on the front left lower position only. Verify vehicle year, make, model, and trim before ordering, especially on Hyundai Ioniq, Kia Niro, Kia Niro EV, Hyundai Kona Electric, and Kia Soul EV applications. Because the assembly is non-adjustable, confirm suspension alignment after installation. Replace the cotter pin during service and torque all fasteners to factory specifications.
Quality Assurance
Mevotech Supreme Parts are engineered with application-specific upgrades for durability and performance, and this assembly is built with Labor Saver features and included service hardware to streamline replacement on high-use passenger vehicles, SUVs, fleets, and working trucks.
Front Left Lower Control Arm Assembly
Mevotech CMS901280 is a suspension control arm and ball joint assembly for the front left lower position on select Hyundai and Kia EV and hybrid applications. It combines an aluminum control arm with a pre-greased ball joint, rubber bushings, and a dust boot for a direct OE-style replacement.
Built for the 2017-2023 Hyundai Ioniq, 2017-2022 Kia Niro, 2019-2022 Kia Niro EV, 2019-2023 Hyundai Kona Electric, and 2020-2023 Kia Soul EV, this assembly is engineered for vehicles that see regular road use and higher service demands. The CMS901280 part number is also listed under related aftermarket references for the same application.
Key Features
- Aluminum control arm construction with silver finish
- Pre-greased ball joint included
- Rubber bushings and rubber dust boot included
- Threaded ball joint stud with castle nut and cotter pin included
- Mounting hardware included
- Non-adjustable design for direct replacement service
- Mevotech Supreme Parts engineering for application-specific durability upgrades
- Labor Saver design elements for faster installation
Detailed Description
Mevotech Supreme CMS901280 is engineered in-house as a front left lower suspension control arm and ball joint assembly for select Hyundai Kona Electric, Kia Soul EV, Hyundai Ioniq, Kia Niro, and Kia Niro EV models. The aluminum arm helps reduce weight while maintaining the structure needed for suspension control, and the included ball joint, bushings, dust boot, castle nut, cotter pin, and mounting hardware support a complete service replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Use CMS901280 when replacing a worn front left lower control arm on 2017-2023 Hyundai and Kia electrified platforms where OE-style geometry and service-ready components matter. The CMS901280 part number is a direct reference for this assembly.
What This Part Helps Address
- Clunking or knocking from the front left lower suspension
- Excessive play from a worn ball joint
- Cracked or deteriorated control arm bushings
- Uneven tire wear caused by suspension looseness
- Steering instability or wandering from worn lower arm components
Installation Notes and Tips
Install on the front left lower position only. Verify vehicle year, make, model, and trim before ordering, especially on Hyundai Ioniq, Kia Niro, Kia Niro EV, Hyundai Kona Electric, and Kia Soul EV applications. Because the assembly is non-adjustable, confirm suspension alignment after installation. Replace the cotter pin during service and torque all fasteners to factory specifications.
Quality Assurance
Mevotech Supreme Parts are engineered with application-specific upgrades for durability and performance, and this assembly is built with Labor Saver features and included service hardware to streamline replacement on high-use passenger vehicles, SUVs, fleets, and working trucks.
Description
Front Left Lower Control Arm Assembly
Mevotech CMS901280 is a suspension control arm and ball joint assembly for the front left lower position on select Hyundai and Kia EV and hybrid applications. It combines an aluminum control arm with a pre-greased ball joint, rubber bushings, and a dust boot for a direct OE-style replacement.
Built for the 2017-2023 Hyundai Ioniq, 2017-2022 Kia Niro, 2019-2022 Kia Niro EV, 2019-2023 Hyundai Kona Electric, and 2020-2023 Kia Soul EV, this assembly is engineered for vehicles that see regular road use and higher service demands. The CMS901280 part number is also listed under related aftermarket references for the same application.
Key Features
- Aluminum control arm construction with silver finish
- Pre-greased ball joint included
- Rubber bushings and rubber dust boot included
- Threaded ball joint stud with castle nut and cotter pin included
- Mounting hardware included
- Non-adjustable design for direct replacement service
- Mevotech Supreme Parts engineering for application-specific durability upgrades
- Labor Saver design elements for faster installation
Detailed Description
Mevotech Supreme CMS901280 is engineered in-house as a front left lower suspension control arm and ball joint assembly for select Hyundai Kona Electric, Kia Soul EV, Hyundai Ioniq, Kia Niro, and Kia Niro EV models. The aluminum arm helps reduce weight while maintaining the structure needed for suspension control, and the included ball joint, bushings, dust boot, castle nut, cotter pin, and mounting hardware support a complete service replacement.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. Use CMS901280 when replacing a worn front left lower control arm on 2017-2023 Hyundai and Kia electrified platforms where OE-style geometry and service-ready components matter. The CMS901280 part number is a direct reference for this assembly.
What This Part Helps Address
- Clunking or knocking from the front left lower suspension
- Excessive play from a worn ball joint
- Cracked or deteriorated control arm bushings
- Uneven tire wear caused by suspension looseness
- Steering instability or wandering from worn lower arm components
Installation Notes and Tips
Install on the front left lower position only. Verify vehicle year, make, model, and trim before ordering, especially on Hyundai Ioniq, Kia Niro, Kia Niro EV, Hyundai Kona Electric, and Kia Soul EV applications. Because the assembly is non-adjustable, confirm suspension alignment after installation. Replace the cotter pin during service and torque all fasteners to factory specifications.
Quality Assurance
Mevotech Supreme Parts are engineered with application-specific upgrades for durability and performance, and this assembly is built with Labor Saver features and included service hardware to streamline replacement on high-use passenger vehicles, SUVs, fleets, and working trucks.
