Mevotech CMS801244 Suspension Control Arm and Ball Joint Assembly - Front Right Lower
Mevotech CMS801244 Front Right Lower Control Arm
Mevotech CMS801244 is a front right lower suspension control arm and ball joint assembly for select Subaru Outback models. Built with application-specific upgrades, it is aimed at high-use passenger vehicles and working applications that need durable steering and suspension performance.
Key Features
- Fits 2020-2024 Subaru Outback, front right lower
- Pre-greased ball joint for reduced prep time
- Aluminum control arm construction with a silver finish
- Press-in ball joint with grooved stud design
- Rubber bushings, neoprene dust boot, and blue boot color
- Castle nut, cotter pin, and mounting hardware included
- Mevotech Supreme Parts engineering for upgraded durability
Detailed Description
This Mevotech Supreme control arm assembly, part number CMS801244, is engineered for the front right lower position on 2020-2024 Subaru Outback models. It combines the control arm, ball joint, bushings, and dust boot in one service-ready unit, helping restore suspension geometry and steering response on the Subaru Outback while reducing the need to source separate components. The aluminum arm, sintered metal bearing material, and rubber bushing design are selected for demanding daily driving and higher-usage service.
Mevotech Supreme parts are developed in-house with application-specific upgrades, and the Labor Saver design approach is used to make installation faster and more straightforward. This part cross-references 5CB80359 and 20202AN02A for the same application. The CMS801244 part number is also listed under Mevotech Supreme CMS801244 interchange references.
What It Helps Address
- Front-end looseness or play at the lower control arm
- Clunking or noise from worn ball joint or bushings
- Uneven tire wear caused by suspension wear
- Steering wander or reduced directional stability
- Corrosion-related replacement needs on the front suspension
Installation Notes and Tips
Fits 2020-2024 Subaru Outback, front right lower. Confirm the vehicle’s suspension configuration before installation and inspect adjacent components such as the wheel bearing, tie rod end, and sway bar links while the assembly is apart. Because the ball joint is press-in, proper service tools and alignment procedures are recommended after replacement. Hardware is included with this assembly.
Quality Assurance
Mevotech Supreme Parts are engineered in-house with upgrades targeted to durability and service performance. CMS801244 is built as a direct replacement-style suspension assembly for the specified Subaru Outback applications, with pre-greased components and included service hardware for a more complete repair.
Mevotech CMS801244 Front Right Lower Control Arm
Mevotech CMS801244 is a front right lower suspension control arm and ball joint assembly for select Subaru Outback models. Built with application-specific upgrades, it is aimed at high-use passenger vehicles and working applications that need durable steering and suspension performance.
Key Features
- Fits 2020-2024 Subaru Outback, front right lower
- Pre-greased ball joint for reduced prep time
- Aluminum control arm construction with a silver finish
- Press-in ball joint with grooved stud design
- Rubber bushings, neoprene dust boot, and blue boot color
- Castle nut, cotter pin, and mounting hardware included
- Mevotech Supreme Parts engineering for upgraded durability
Detailed Description
This Mevotech Supreme control arm assembly, part number CMS801244, is engineered for the front right lower position on 2020-2024 Subaru Outback models. It combines the control arm, ball joint, bushings, and dust boot in one service-ready unit, helping restore suspension geometry and steering response on the Subaru Outback while reducing the need to source separate components. The aluminum arm, sintered metal bearing material, and rubber bushing design are selected for demanding daily driving and higher-usage service.
Mevotech Supreme parts are developed in-house with application-specific upgrades, and the Labor Saver design approach is used to make installation faster and more straightforward. This part cross-references 5CB80359 and 20202AN02A for the same application. The CMS801244 part number is also listed under Mevotech Supreme CMS801244 interchange references.
What It Helps Address
- Front-end looseness or play at the lower control arm
- Clunking or noise from worn ball joint or bushings
- Uneven tire wear caused by suspension wear
- Steering wander or reduced directional stability
- Corrosion-related replacement needs on the front suspension
Installation Notes and Tips
Fits 2020-2024 Subaru Outback, front right lower. Confirm the vehicle’s suspension configuration before installation and inspect adjacent components such as the wheel bearing, tie rod end, and sway bar links while the assembly is apart. Because the ball joint is press-in, proper service tools and alignment procedures are recommended after replacement. Hardware is included with this assembly.
Quality Assurance
Mevotech Supreme Parts are engineered in-house with upgrades targeted to durability and service performance. CMS801244 is built as a direct replacement-style suspension assembly for the specified Subaru Outback applications, with pre-greased components and included service hardware for a more complete repair.
Original: $171.25
-65%$171.25
$59.94Description
Mevotech CMS801244 Front Right Lower Control Arm
Mevotech CMS801244 is a front right lower suspension control arm and ball joint assembly for select Subaru Outback models. Built with application-specific upgrades, it is aimed at high-use passenger vehicles and working applications that need durable steering and suspension performance.
Key Features
- Fits 2020-2024 Subaru Outback, front right lower
- Pre-greased ball joint for reduced prep time
- Aluminum control arm construction with a silver finish
- Press-in ball joint with grooved stud design
- Rubber bushings, neoprene dust boot, and blue boot color
- Castle nut, cotter pin, and mounting hardware included
- Mevotech Supreme Parts engineering for upgraded durability
Detailed Description
This Mevotech Supreme control arm assembly, part number CMS801244, is engineered for the front right lower position on 2020-2024 Subaru Outback models. It combines the control arm, ball joint, bushings, and dust boot in one service-ready unit, helping restore suspension geometry and steering response on the Subaru Outback while reducing the need to source separate components. The aluminum arm, sintered metal bearing material, and rubber bushing design are selected for demanding daily driving and higher-usage service.
Mevotech Supreme parts are developed in-house with application-specific upgrades, and the Labor Saver design approach is used to make installation faster and more straightforward. This part cross-references 5CB80359 and 20202AN02A for the same application. The CMS801244 part number is also listed under Mevotech Supreme CMS801244 interchange references.
What It Helps Address
- Front-end looseness or play at the lower control arm
- Clunking or noise from worn ball joint or bushings
- Uneven tire wear caused by suspension wear
- Steering wander or reduced directional stability
- Corrosion-related replacement needs on the front suspension
Installation Notes and Tips
Fits 2020-2024 Subaru Outback, front right lower. Confirm the vehicle’s suspension configuration before installation and inspect adjacent components such as the wheel bearing, tie rod end, and sway bar links while the assembly is apart. Because the ball joint is press-in, proper service tools and alignment procedures are recommended after replacement. Hardware is included with this assembly.
Quality Assurance
Mevotech Supreme Parts are engineered in-house with upgrades targeted to durability and service performance. CMS801244 is built as a direct replacement-style suspension assembly for the specified Subaru Outback applications, with pre-greased components and included service hardware for a more complete repair.
