Mevotech CMS501335 Suspension Control Arm and Ball Joint Assembly - Front Left Lower
Front Left Lower Control Arm for GM SUVs and Trucks
The Mevotech Supreme CMS501335 is a front left lower suspension control arm and ball joint assembly built for heavy-use passenger vehicles, SUVs, fleets, and working trucks. It is engineered in-house with application-specific upgrades for durability and consistent steering response on demanding roads.
Compatible With 2019-2026 Chevrolet Silverado 1500, front left lower; 2021-2026 Cadillac Escalade, front left lower; and 2021-2026 GMC Yukon, front left lower. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Key Features
- Mevotech Supreme Parts design for OE-style replacement performance
- Steel control arm construction with black corrosion-resistant finish
- Pre-greased assembly with grease fitting included for serviceability
- Ball joint included with press-in mounting and threaded stud type
- Bushings included with rubber bushing material
- Dust boot included with neoprene boot material and blue boot color
- Mounting hardware and locking nut included
- Greaseable design for maintenance access
Detailed Description
CMS501335 is a direct-fit front left lower control arm assembly for select Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500 and Silverado 1500 LTD, GMC Sierra 1500 and Sierra 1500 Limited, Yukon, and Yukon XL applications. Mevotech Supreme components are built with application-specific upgrades to improve durability and performance in high-usage service, while Labor Saver design elements help streamline installation. The assembly includes the ball joint, bushings, dust boot, grease fitting, mounting hardware, and locking nut, making it a complete replacement for worn suspension components. Search terms such as front left lower control arm for Chevrolet Silverado 1500, GMC Sierra 1500 front suspension control arm, and Cadillac Escalade lower ball joint assembly all point to this part number, CMS501335.
What It Helps Address
- Clunking or looseness from a worn lower control arm assembly
- Uneven tire wear caused by suspension play
- Steering wander or reduced front-end stability
- Ball joint noise or binding at the front left lower corner
- Degraded ride control from worn bushings or mounting points
Installation Notes
Install on the front left lower position only. Verify vehicle year, make, model, and trim before ordering, especially on Silverado 1500, Sierra 1500, Tahoe, Yukon, and Escalade applications. Because the ball joint is press-in and the stud is threaded, proper suspension tools and torque procedures are important for correct installation. Grease the assembly after installation if service procedures call for it, and confirm alignment after replacement.
Quality Assurance
Mevotech Supreme parts are engineered in-house with application-specific upgrades for durability and performance. The corrosion-resistant finish, greaseable design, and included service components support long-term use in commercial and passenger vehicle suspension service.
Front Left Lower Control Arm for GM SUVs and Trucks
The Mevotech Supreme CMS501335 is a front left lower suspension control arm and ball joint assembly built for heavy-use passenger vehicles, SUVs, fleets, and working trucks. It is engineered in-house with application-specific upgrades for durability and consistent steering response on demanding roads.
Compatible With 2019-2026 Chevrolet Silverado 1500, front left lower; 2021-2026 Cadillac Escalade, front left lower; and 2021-2026 GMC Yukon, front left lower. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Key Features
- Mevotech Supreme Parts design for OE-style replacement performance
- Steel control arm construction with black corrosion-resistant finish
- Pre-greased assembly with grease fitting included for serviceability
- Ball joint included with press-in mounting and threaded stud type
- Bushings included with rubber bushing material
- Dust boot included with neoprene boot material and blue boot color
- Mounting hardware and locking nut included
- Greaseable design for maintenance access
Detailed Description
CMS501335 is a direct-fit front left lower control arm assembly for select Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500 and Silverado 1500 LTD, GMC Sierra 1500 and Sierra 1500 Limited, Yukon, and Yukon XL applications. Mevotech Supreme components are built with application-specific upgrades to improve durability and performance in high-usage service, while Labor Saver design elements help streamline installation. The assembly includes the ball joint, bushings, dust boot, grease fitting, mounting hardware, and locking nut, making it a complete replacement for worn suspension components. Search terms such as front left lower control arm for Chevrolet Silverado 1500, GMC Sierra 1500 front suspension control arm, and Cadillac Escalade lower ball joint assembly all point to this part number, CMS501335.
What It Helps Address
- Clunking or looseness from a worn lower control arm assembly
- Uneven tire wear caused by suspension play
- Steering wander or reduced front-end stability
- Ball joint noise or binding at the front left lower corner
- Degraded ride control from worn bushings or mounting points
Installation Notes
Install on the front left lower position only. Verify vehicle year, make, model, and trim before ordering, especially on Silverado 1500, Sierra 1500, Tahoe, Yukon, and Escalade applications. Because the ball joint is press-in and the stud is threaded, proper suspension tools and torque procedures are important for correct installation. Grease the assembly after installation if service procedures call for it, and confirm alignment after replacement.
Quality Assurance
Mevotech Supreme parts are engineered in-house with application-specific upgrades for durability and performance. The corrosion-resistant finish, greaseable design, and included service components support long-term use in commercial and passenger vehicle suspension service.
Description
Front Left Lower Control Arm for GM SUVs and Trucks
The Mevotech Supreme CMS501335 is a front left lower suspension control arm and ball joint assembly built for heavy-use passenger vehicles, SUVs, fleets, and working trucks. It is engineered in-house with application-specific upgrades for durability and consistent steering response on demanding roads.
Compatible With 2019-2026 Chevrolet Silverado 1500, front left lower; 2021-2026 Cadillac Escalade, front left lower; and 2021-2026 GMC Yukon, front left lower. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Key Features
- Mevotech Supreme Parts design for OE-style replacement performance
- Steel control arm construction with black corrosion-resistant finish
- Pre-greased assembly with grease fitting included for serviceability
- Ball joint included with press-in mounting and threaded stud type
- Bushings included with rubber bushing material
- Dust boot included with neoprene boot material and blue boot color
- Mounting hardware and locking nut included
- Greaseable design for maintenance access
Detailed Description
CMS501335 is a direct-fit front left lower control arm assembly for select Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500 and Silverado 1500 LTD, GMC Sierra 1500 and Sierra 1500 Limited, Yukon, and Yukon XL applications. Mevotech Supreme components are built with application-specific upgrades to improve durability and performance in high-usage service, while Labor Saver design elements help streamline installation. The assembly includes the ball joint, bushings, dust boot, grease fitting, mounting hardware, and locking nut, making it a complete replacement for worn suspension components. Search terms such as front left lower control arm for Chevrolet Silverado 1500, GMC Sierra 1500 front suspension control arm, and Cadillac Escalade lower ball joint assembly all point to this part number, CMS501335.
What It Helps Address
- Clunking or looseness from a worn lower control arm assembly
- Uneven tire wear caused by suspension play
- Steering wander or reduced front-end stability
- Ball joint noise or binding at the front left lower corner
- Degraded ride control from worn bushings or mounting points
Installation Notes
Install on the front left lower position only. Verify vehicle year, make, model, and trim before ordering, especially on Silverado 1500, Sierra 1500, Tahoe, Yukon, and Escalade applications. Because the ball joint is press-in and the stud is threaded, proper suspension tools and torque procedures are important for correct installation. Grease the assembly after installation if service procedures call for it, and confirm alignment after replacement.
Quality Assurance
Mevotech Supreme parts are engineered in-house with application-specific upgrades for durability and performance. The corrosion-resistant finish, greaseable design, and included service components support long-term use in commercial and passenger vehicle suspension service.
