Mevotech CMS401286 Suspension Control Arm and Ball Joint Assembly - Front Left Lower Forward
Front Left Lower Forward Control Arm for Explorer
Mevotech CMS401286 is a suspension control arm and ball joint assembly for the front left lower forward position on 2020-2025 Ford Explorer models. Built with an aluminum arm, pre-greased components, and a threaded ball joint stud, it is set up for direct replacement service on high-use passenger and utility vehicles.
Key Features
- Fits 2020-2025 Ford Explorer, front left lower forward
- Mevotech Supreme Parts engineered with application-specific upgrades
- Aluminum control arm with silver finish
- Ball joint included with threaded stud design
- Pre-greased with grease fitting included
- Bushings, dust boot, mounting hardware, and locking nut included
- Greaseable design for serviceability
- Rubber bushings, sintered metal bearing material, and neoprene dust boot
Detailed Description
This Mevotech Supreme control arm assembly, part number CMS401286, is built for the front left lower forward suspension position on the Ford Explorer. It combines the control arm and ball joint into one service part, helping restore steering geometry and suspension movement when the original assembly is worn. The aluminum construction supports reduced unsprung weight, while the pre-greased, greaseable design and included grease fitting simplify maintenance. This part cross-references Ford OE numbers such as LB5Z3083A and LB5Z3083B for the same application.
Mevotech Supreme Parts are developed in-house with upgrades targeted at durability and everyday performance. For Ford Explorer owners servicing the front suspension, CMS401286 provides a direct replacement solution for the 2020-2025 model years and is built for demanding passenger and fleet use. The part number CMS401286 is also useful when searching for a Ford Explorer front left lower forward control arm and ball joint assembly.
Common Problems This Part Can Address
- Clunking or knocking from the front suspension
- Excessive play in the lower control arm or ball joint
- Uneven tire wear caused by worn suspension joints
- Loose or unstable steering feel
- Cracked or deteriorated control arm bushings
Installation Notes and Tips
Verify the front left lower forward position before installation on the Ford Explorer. Inspect adjacent suspension components, alignment angles, and fasteners during service. Because the assembly includes a threaded ball joint stud and locking nut, confirm proper torque specifications and alignment after installation. CMS401286 is pre-greased and greaseable, so service intervals can be maintained through the included fitting.
Quality Assurance
Mevotech Supreme Parts are engineered in-house with application-specific design updates for durability and performance in commercial and passenger vehicle service. CMS401286 is built as a service-ready suspension assembly for the Ford Explorer platform and is backed by Mevotech’s product engineering standards.
Front Left Lower Forward Control Arm for Explorer
Mevotech CMS401286 is a suspension control arm and ball joint assembly for the front left lower forward position on 2020-2025 Ford Explorer models. Built with an aluminum arm, pre-greased components, and a threaded ball joint stud, it is set up for direct replacement service on high-use passenger and utility vehicles.
Key Features
- Fits 2020-2025 Ford Explorer, front left lower forward
- Mevotech Supreme Parts engineered with application-specific upgrades
- Aluminum control arm with silver finish
- Ball joint included with threaded stud design
- Pre-greased with grease fitting included
- Bushings, dust boot, mounting hardware, and locking nut included
- Greaseable design for serviceability
- Rubber bushings, sintered metal bearing material, and neoprene dust boot
Detailed Description
This Mevotech Supreme control arm assembly, part number CMS401286, is built for the front left lower forward suspension position on the Ford Explorer. It combines the control arm and ball joint into one service part, helping restore steering geometry and suspension movement when the original assembly is worn. The aluminum construction supports reduced unsprung weight, while the pre-greased, greaseable design and included grease fitting simplify maintenance. This part cross-references Ford OE numbers such as LB5Z3083A and LB5Z3083B for the same application.
Mevotech Supreme Parts are developed in-house with upgrades targeted at durability and everyday performance. For Ford Explorer owners servicing the front suspension, CMS401286 provides a direct replacement solution for the 2020-2025 model years and is built for demanding passenger and fleet use. The part number CMS401286 is also useful when searching for a Ford Explorer front left lower forward control arm and ball joint assembly.
Common Problems This Part Can Address
- Clunking or knocking from the front suspension
- Excessive play in the lower control arm or ball joint
- Uneven tire wear caused by worn suspension joints
- Loose or unstable steering feel
- Cracked or deteriorated control arm bushings
Installation Notes and Tips
Verify the front left lower forward position before installation on the Ford Explorer. Inspect adjacent suspension components, alignment angles, and fasteners during service. Because the assembly includes a threaded ball joint stud and locking nut, confirm proper torque specifications and alignment after installation. CMS401286 is pre-greased and greaseable, so service intervals can be maintained through the included fitting.
Quality Assurance
Mevotech Supreme Parts are engineered in-house with application-specific design updates for durability and performance in commercial and passenger vehicle service. CMS401286 is built as a service-ready suspension assembly for the Ford Explorer platform and is backed by Mevotech’s product engineering standards.
Description
Front Left Lower Forward Control Arm for Explorer
Mevotech CMS401286 is a suspension control arm and ball joint assembly for the front left lower forward position on 2020-2025 Ford Explorer models. Built with an aluminum arm, pre-greased components, and a threaded ball joint stud, it is set up for direct replacement service on high-use passenger and utility vehicles.
Key Features
- Fits 2020-2025 Ford Explorer, front left lower forward
- Mevotech Supreme Parts engineered with application-specific upgrades
- Aluminum control arm with silver finish
- Ball joint included with threaded stud design
- Pre-greased with grease fitting included
- Bushings, dust boot, mounting hardware, and locking nut included
- Greaseable design for serviceability
- Rubber bushings, sintered metal bearing material, and neoprene dust boot
Detailed Description
This Mevotech Supreme control arm assembly, part number CMS401286, is built for the front left lower forward suspension position on the Ford Explorer. It combines the control arm and ball joint into one service part, helping restore steering geometry and suspension movement when the original assembly is worn. The aluminum construction supports reduced unsprung weight, while the pre-greased, greaseable design and included grease fitting simplify maintenance. This part cross-references Ford OE numbers such as LB5Z3083A and LB5Z3083B for the same application.
Mevotech Supreme Parts are developed in-house with upgrades targeted at durability and everyday performance. For Ford Explorer owners servicing the front suspension, CMS401286 provides a direct replacement solution for the 2020-2025 model years and is built for demanding passenger and fleet use. The part number CMS401286 is also useful when searching for a Ford Explorer front left lower forward control arm and ball joint assembly.
Common Problems This Part Can Address
- Clunking or knocking from the front suspension
- Excessive play in the lower control arm or ball joint
- Uneven tire wear caused by worn suspension joints
- Loose or unstable steering feel
- Cracked or deteriorated control arm bushings
Installation Notes and Tips
Verify the front left lower forward position before installation on the Ford Explorer. Inspect adjacent suspension components, alignment angles, and fasteners during service. Because the assembly includes a threaded ball joint stud and locking nut, confirm proper torque specifications and alignment after installation. CMS401286 is pre-greased and greaseable, so service intervals can be maintained through the included fitting.
Quality Assurance
Mevotech Supreme Parts are engineered in-house with application-specific design updates for durability and performance in commercial and passenger vehicle service. CMS401286 is built as a service-ready suspension assembly for the Ford Explorer platform and is backed by Mevotech’s product engineering standards.
