Luk DMF196 Clutch Flywheel
LuK DMF196 Dual Mass Flywheel Overview
The LuK DMF196 is a clutch flywheel engineered as a dual mass flywheel for select Volkswagen applications. It is tuned to reduce drivetrain stress and help protect components that can be affected by the vibration transfer common with solid flywheels.
Compatible with 2013-2018 Volkswagen Jetta and 2013-2017 Volkswagen Beetle applications, this LuK flywheel is built around OE-style dimensions and tooth count for proper transmission interface. The LuK DMF196 is a direct-fit option for drivers replacing a worn dual mass flywheel on a Volkswagen Jetta or Volkswagen Beetle.
Key Specifications
- Part number: DMF196
- Flywheel diameter: 24.3 in. / 9.567 in.
- Flywheel inner diameter: 15.2 in. / 5.984 in.
- Flywheel cup depth/step height: -0.394 in. / -10 mm
- Number of teeth: 132
- Dual mass design tuned for specific vehicle applications
Detailed Product Description
LuK designs this dual mass flywheel to match the vibration and load characteristics of the original drivetrain setup. The DMF196 helps isolate torsional vibration before it reaches the gearbox, which is important in vehicles that rely on a balanced clutch and flywheel assembly for smooth operation. For Volkswagen Jetta and Volkswagen Beetle models in the listed years, the DMF196 provides the dimensional and tooth-count match needed for proper engagement.
This part cross-references 06J105266AC and 4150834100 for the same application. When replacing a flywheel on a 2013-2018 Volkswagen Jetta or 2013-2017 Volkswagen Beetle, using the correct dual mass design helps maintain the intended drivetrain behavior.
Common Problems This Part Addresses
- Excess drivetrain vibration transferred into the transmission
- Noise from a worn or failing flywheel assembly
- Premature wear on engine mounts caused by vibration loading
- Gearbox stress associated with solid flywheel conversions
- Crankshaft damage linked to uncontrolled torsional movement
Installation Notes and Tips
Inspect the clutch system, release components, and related drivetrain parts before installation. Confirm the flywheel diameter, inner diameter, step height, and 132-tooth count match the original specification for the vehicle. Proper torque procedures and clean mating surfaces are important for a secure installation on Volkswagen Jetta and Volkswagen Beetle applications.
Quality Assurance
LuK supplies OE-level drivetrain components and tunes each dual mass flywheel to the vehicle application rather than using a one-size-fits-all design. The DMF196 follows that approach with application-specific sizing and construction for consistent fitment and function.
LuK DMF196 Dual Mass Flywheel Overview
The LuK DMF196 is a clutch flywheel engineered as a dual mass flywheel for select Volkswagen applications. It is tuned to reduce drivetrain stress and help protect components that can be affected by the vibration transfer common with solid flywheels.
Compatible with 2013-2018 Volkswagen Jetta and 2013-2017 Volkswagen Beetle applications, this LuK flywheel is built around OE-style dimensions and tooth count for proper transmission interface. The LuK DMF196 is a direct-fit option for drivers replacing a worn dual mass flywheel on a Volkswagen Jetta or Volkswagen Beetle.
Key Specifications
- Part number: DMF196
- Flywheel diameter: 24.3 in. / 9.567 in.
- Flywheel inner diameter: 15.2 in. / 5.984 in.
- Flywheel cup depth/step height: -0.394 in. / -10 mm
- Number of teeth: 132
- Dual mass design tuned for specific vehicle applications
Detailed Product Description
LuK designs this dual mass flywheel to match the vibration and load characteristics of the original drivetrain setup. The DMF196 helps isolate torsional vibration before it reaches the gearbox, which is important in vehicles that rely on a balanced clutch and flywheel assembly for smooth operation. For Volkswagen Jetta and Volkswagen Beetle models in the listed years, the DMF196 provides the dimensional and tooth-count match needed for proper engagement.
This part cross-references 06J105266AC and 4150834100 for the same application. When replacing a flywheel on a 2013-2018 Volkswagen Jetta or 2013-2017 Volkswagen Beetle, using the correct dual mass design helps maintain the intended drivetrain behavior.
Common Problems This Part Addresses
- Excess drivetrain vibration transferred into the transmission
- Noise from a worn or failing flywheel assembly
- Premature wear on engine mounts caused by vibration loading
- Gearbox stress associated with solid flywheel conversions
- Crankshaft damage linked to uncontrolled torsional movement
Installation Notes and Tips
Inspect the clutch system, release components, and related drivetrain parts before installation. Confirm the flywheel diameter, inner diameter, step height, and 132-tooth count match the original specification for the vehicle. Proper torque procedures and clean mating surfaces are important for a secure installation on Volkswagen Jetta and Volkswagen Beetle applications.
Quality Assurance
LuK supplies OE-level drivetrain components and tunes each dual mass flywheel to the vehicle application rather than using a one-size-fits-all design. The DMF196 follows that approach with application-specific sizing and construction for consistent fitment and function.
Original: $694.61
-65%$694.61
$243.11Description
LuK DMF196 Dual Mass Flywheel Overview
The LuK DMF196 is a clutch flywheel engineered as a dual mass flywheel for select Volkswagen applications. It is tuned to reduce drivetrain stress and help protect components that can be affected by the vibration transfer common with solid flywheels.
Compatible with 2013-2018 Volkswagen Jetta and 2013-2017 Volkswagen Beetle applications, this LuK flywheel is built around OE-style dimensions and tooth count for proper transmission interface. The LuK DMF196 is a direct-fit option for drivers replacing a worn dual mass flywheel on a Volkswagen Jetta or Volkswagen Beetle.
Key Specifications
- Part number: DMF196
- Flywheel diameter: 24.3 in. / 9.567 in.
- Flywheel inner diameter: 15.2 in. / 5.984 in.
- Flywheel cup depth/step height: -0.394 in. / -10 mm
- Number of teeth: 132
- Dual mass design tuned for specific vehicle applications
Detailed Product Description
LuK designs this dual mass flywheel to match the vibration and load characteristics of the original drivetrain setup. The DMF196 helps isolate torsional vibration before it reaches the gearbox, which is important in vehicles that rely on a balanced clutch and flywheel assembly for smooth operation. For Volkswagen Jetta and Volkswagen Beetle models in the listed years, the DMF196 provides the dimensional and tooth-count match needed for proper engagement.
This part cross-references 06J105266AC and 4150834100 for the same application. When replacing a flywheel on a 2013-2018 Volkswagen Jetta or 2013-2017 Volkswagen Beetle, using the correct dual mass design helps maintain the intended drivetrain behavior.
Common Problems This Part Addresses
- Excess drivetrain vibration transferred into the transmission
- Noise from a worn or failing flywheel assembly
- Premature wear on engine mounts caused by vibration loading
- Gearbox stress associated with solid flywheel conversions
- Crankshaft damage linked to uncontrolled torsional movement
Installation Notes and Tips
Inspect the clutch system, release components, and related drivetrain parts before installation. Confirm the flywheel diameter, inner diameter, step height, and 132-tooth count match the original specification for the vehicle. Proper torque procedures and clean mating surfaces are important for a secure installation on Volkswagen Jetta and Volkswagen Beetle applications.
Quality Assurance
LuK supplies OE-level drivetrain components and tunes each dual mass flywheel to the vehicle application rather than using a one-size-fits-all design. The DMF196 follows that approach with application-specific sizing and construction for consistent fitment and function.
