Dynamite Friction 830-76141R Disc Brake Rotor - Rear Right
Dynamite Friction Rear Right Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-76141R, is a rear right disc brake rotor built for select Toyota and Lexus applications. It features a slotted X drilled surface, rust resistant coating, and Geospec Silver Grey hat finish for a clean, corrosion-conscious brake service replacement.
Key Features
- Part number 830-76141R for rear right brake service
- Slotted X drilled rotor surface for directional braking performance
- Rust resistant coating for added protection against corrosion
- Geospec Silver Grey hat finish
- Solid rotor design with 5 bolt holes
- Outside diameter: 309 mm
- Nominal thickness: 10 mm; discard thickness: 8.5 mm
- 5-lug pattern with 114.3 mm bolt circle diameter
Product Details
The DFC Geoperformance Rotor line focuses on application-specific brake rotors with drilled and slotted surfaces for consistent pad contact and heat management. This rear right rotor uses a directional braking surface and a plain disc finish, with a 62 mm center hole diameter and 62.7 mm overall height. The part number 830-76141R is listed for 2011-2020 Toyota Sienna rear right, 2014-2019 Toyota Highlander rear right, 2010-2015 Lexus RX350 rear right, and 2010-2015 Lexus RX450h rear right.
Common Brake Issues This Rotor Can Address
- Rear brake rotor wear at or near discard thickness
- Brake pulsation from uneven rotor surface condition
- Corrosion on the rotor hat or exposed metal surfaces
- Reduced braking consistency on the rear right corner
- Noise or vibration associated with worn brake rotors
Installation Notes and Fitment
- Fits 2011-2020 Toyota Sienna, rear right.
- Fits 2014-2019 Toyota Highlander, rear right.
- Fits 2010-2015 Lexus RX350, rear right.
- Fits 2010-2015 Lexus RX450h, rear right.
- Confirm rotor dimensions, bolt pattern, and directional orientation before installation.
- Inspect pads, caliper condition, and hub surface during brake service.
Quality Assurance
Dynamite Friction builds this rotor as a direct-fit brake replacement for the listed Toyota Sienna, Toyota Highlander, Lexus RX350, and Lexus RX450h rear right applications. The rust resistant coating and Geospec Silver Grey hat finish support long-term appearance and service durability in everyday brake use.
Dynamite Friction Rear Right Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-76141R, is a rear right disc brake rotor built for select Toyota and Lexus applications. It features a slotted X drilled surface, rust resistant coating, and Geospec Silver Grey hat finish for a clean, corrosion-conscious brake service replacement.
Key Features
- Part number 830-76141R for rear right brake service
- Slotted X drilled rotor surface for directional braking performance
- Rust resistant coating for added protection against corrosion
- Geospec Silver Grey hat finish
- Solid rotor design with 5 bolt holes
- Outside diameter: 309 mm
- Nominal thickness: 10 mm; discard thickness: 8.5 mm
- 5-lug pattern with 114.3 mm bolt circle diameter
Product Details
The DFC Geoperformance Rotor line focuses on application-specific brake rotors with drilled and slotted surfaces for consistent pad contact and heat management. This rear right rotor uses a directional braking surface and a plain disc finish, with a 62 mm center hole diameter and 62.7 mm overall height. The part number 830-76141R is listed for 2011-2020 Toyota Sienna rear right, 2014-2019 Toyota Highlander rear right, 2010-2015 Lexus RX350 rear right, and 2010-2015 Lexus RX450h rear right.
Common Brake Issues This Rotor Can Address
- Rear brake rotor wear at or near discard thickness
- Brake pulsation from uneven rotor surface condition
- Corrosion on the rotor hat or exposed metal surfaces
- Reduced braking consistency on the rear right corner
- Noise or vibration associated with worn brake rotors
Installation Notes and Fitment
- Fits 2011-2020 Toyota Sienna, rear right.
- Fits 2014-2019 Toyota Highlander, rear right.
- Fits 2010-2015 Lexus RX350, rear right.
- Fits 2010-2015 Lexus RX450h, rear right.
- Confirm rotor dimensions, bolt pattern, and directional orientation before installation.
- Inspect pads, caliper condition, and hub surface during brake service.
Quality Assurance
Dynamite Friction builds this rotor as a direct-fit brake replacement for the listed Toyota Sienna, Toyota Highlander, Lexus RX350, and Lexus RX450h rear right applications. The rust resistant coating and Geospec Silver Grey hat finish support long-term appearance and service durability in everyday brake use.
Description
Dynamite Friction Rear Right Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-76141R, is a rear right disc brake rotor built for select Toyota and Lexus applications. It features a slotted X drilled surface, rust resistant coating, and Geospec Silver Grey hat finish for a clean, corrosion-conscious brake service replacement.
Key Features
- Part number 830-76141R for rear right brake service
- Slotted X drilled rotor surface for directional braking performance
- Rust resistant coating for added protection against corrosion
- Geospec Silver Grey hat finish
- Solid rotor design with 5 bolt holes
- Outside diameter: 309 mm
- Nominal thickness: 10 mm; discard thickness: 8.5 mm
- 5-lug pattern with 114.3 mm bolt circle diameter
Product Details
The DFC Geoperformance Rotor line focuses on application-specific brake rotors with drilled and slotted surfaces for consistent pad contact and heat management. This rear right rotor uses a directional braking surface and a plain disc finish, with a 62 mm center hole diameter and 62.7 mm overall height. The part number 830-76141R is listed for 2011-2020 Toyota Sienna rear right, 2014-2019 Toyota Highlander rear right, 2010-2015 Lexus RX350 rear right, and 2010-2015 Lexus RX450h rear right.
Common Brake Issues This Rotor Can Address
- Rear brake rotor wear at or near discard thickness
- Brake pulsation from uneven rotor surface condition
- Corrosion on the rotor hat or exposed metal surfaces
- Reduced braking consistency on the rear right corner
- Noise or vibration associated with worn brake rotors
Installation Notes and Fitment
- Fits 2011-2020 Toyota Sienna, rear right.
- Fits 2014-2019 Toyota Highlander, rear right.
- Fits 2010-2015 Lexus RX350, rear right.
- Fits 2010-2015 Lexus RX450h, rear right.
- Confirm rotor dimensions, bolt pattern, and directional orientation before installation.
- Inspect pads, caliper condition, and hub surface during brake service.
Quality Assurance
Dynamite Friction builds this rotor as a direct-fit brake replacement for the listed Toyota Sienna, Toyota Highlander, Lexus RX350, and Lexus RX450h rear right applications. The rust resistant coating and Geospec Silver Grey hat finish support long-term appearance and service durability in everyday brake use.
