Dynamite Friction 830-59061R Disc Brake Rotor - Front Right
Front Right Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-59061R, is a vented disc brake rotor for the front right position. It is built for 2016-2026 Honda Civic, 2019-2022 Honda Insight, and 2016-2017 Honda Accord applications that use a 5-lug, 114.3 mm bolt circle setup.
This rotor combines a slotted X drilled surface with a directional brake face to support consistent pad contact and heat management in demanding stop-and-go driving. The Geospec Silver Grey hat finish and rust resistant coating help protect exposed areas, while the plain disc finish keeps the braking surface focused on function.
- Part number 830-59061R for front right brake service
- Fits 2016-2026 Honda Civic, front right
- Fits 2019-2022 Honda Insight, front right
- Fits 2016-2017 Honda Accord, front right
- Vented rotor construction with 282 mm outside diameter
- Directional slotted X drilled surface for brake performance tuning
- Rust resistant coating with Geospec Silver Grey hat finish
- 5 bolt holes, 5 stud/lug holes, 64.2 mm center hole diameter
DFC Geoperformance Rotor Line
The DFC Geoperformance Rotor line focuses on application-specific brake rotors with performance-oriented surface patterns and corrosion protection. For this front right rotor, the drilled and slotted design is paired with a vented structure and directional surface layout to match the needs of Civic, Insight, and Accord front brake systems.
Detailed Fitment and Specs
Use this rotor when replacing the front right disc brake rotor on the listed Honda models. Key dimensions include 21 mm discard thickness, 22.9 mm nominal thickness, 47.5 mm height, and a 114.3 mm bolt circle diameter. The directional brake surface and 5-lug pattern make part number 830-59061R a direct-match service part for the confirmed applications.
Common Brake Issues It Can Address
- Brake pulsation from a worn or uneven rotor surface
- Reduced braking consistency from heat buildup
- Surface corrosion on the rotor hat or exposed areas
- Noise caused by glazed or uneven brake contact surfaces
- Rotor replacement needs on front right Honda brake service
Installation Notes and Quality Assurance
Confirm rotor orientation before installation because this is a directional front right rotor. Verify discard thickness, hub dimensions, and wheel fitment against the vehicle before service, and inspect pads and caliper components at the same time. Part number 830-59061R is built to the listed specifications for the confirmed Honda Civic, Honda Insight, and Honda Accord applications.
Cross-reference note: This part cross-references Monroe Shocks & Struts (e.g., 172286) for the same application.
Front Right Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-59061R, is a vented disc brake rotor for the front right position. It is built for 2016-2026 Honda Civic, 2019-2022 Honda Insight, and 2016-2017 Honda Accord applications that use a 5-lug, 114.3 mm bolt circle setup.
This rotor combines a slotted X drilled surface with a directional brake face to support consistent pad contact and heat management in demanding stop-and-go driving. The Geospec Silver Grey hat finish and rust resistant coating help protect exposed areas, while the plain disc finish keeps the braking surface focused on function.
- Part number 830-59061R for front right brake service
- Fits 2016-2026 Honda Civic, front right
- Fits 2019-2022 Honda Insight, front right
- Fits 2016-2017 Honda Accord, front right
- Vented rotor construction with 282 mm outside diameter
- Directional slotted X drilled surface for brake performance tuning
- Rust resistant coating with Geospec Silver Grey hat finish
- 5 bolt holes, 5 stud/lug holes, 64.2 mm center hole diameter
DFC Geoperformance Rotor Line
The DFC Geoperformance Rotor line focuses on application-specific brake rotors with performance-oriented surface patterns and corrosion protection. For this front right rotor, the drilled and slotted design is paired with a vented structure and directional surface layout to match the needs of Civic, Insight, and Accord front brake systems.
Detailed Fitment and Specs
Use this rotor when replacing the front right disc brake rotor on the listed Honda models. Key dimensions include 21 mm discard thickness, 22.9 mm nominal thickness, 47.5 mm height, and a 114.3 mm bolt circle diameter. The directional brake surface and 5-lug pattern make part number 830-59061R a direct-match service part for the confirmed applications.
Common Brake Issues It Can Address
- Brake pulsation from a worn or uneven rotor surface
- Reduced braking consistency from heat buildup
- Surface corrosion on the rotor hat or exposed areas
- Noise caused by glazed or uneven brake contact surfaces
- Rotor replacement needs on front right Honda brake service
Installation Notes and Quality Assurance
Confirm rotor orientation before installation because this is a directional front right rotor. Verify discard thickness, hub dimensions, and wheel fitment against the vehicle before service, and inspect pads and caliper components at the same time. Part number 830-59061R is built to the listed specifications for the confirmed Honda Civic, Honda Insight, and Honda Accord applications.
Cross-reference note: This part cross-references Monroe Shocks & Struts (e.g., 172286) for the same application.
Description
Front Right Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-59061R, is a vented disc brake rotor for the front right position. It is built for 2016-2026 Honda Civic, 2019-2022 Honda Insight, and 2016-2017 Honda Accord applications that use a 5-lug, 114.3 mm bolt circle setup.
This rotor combines a slotted X drilled surface with a directional brake face to support consistent pad contact and heat management in demanding stop-and-go driving. The Geospec Silver Grey hat finish and rust resistant coating help protect exposed areas, while the plain disc finish keeps the braking surface focused on function.
- Part number 830-59061R for front right brake service
- Fits 2016-2026 Honda Civic, front right
- Fits 2019-2022 Honda Insight, front right
- Fits 2016-2017 Honda Accord, front right
- Vented rotor construction with 282 mm outside diameter
- Directional slotted X drilled surface for brake performance tuning
- Rust resistant coating with Geospec Silver Grey hat finish
- 5 bolt holes, 5 stud/lug holes, 64.2 mm center hole diameter
DFC Geoperformance Rotor Line
The DFC Geoperformance Rotor line focuses on application-specific brake rotors with performance-oriented surface patterns and corrosion protection. For this front right rotor, the drilled and slotted design is paired with a vented structure and directional surface layout to match the needs of Civic, Insight, and Accord front brake systems.
Detailed Fitment and Specs
Use this rotor when replacing the front right disc brake rotor on the listed Honda models. Key dimensions include 21 mm discard thickness, 22.9 mm nominal thickness, 47.5 mm height, and a 114.3 mm bolt circle diameter. The directional brake surface and 5-lug pattern make part number 830-59061R a direct-match service part for the confirmed applications.
Common Brake Issues It Can Address
- Brake pulsation from a worn or uneven rotor surface
- Reduced braking consistency from heat buildup
- Surface corrosion on the rotor hat or exposed areas
- Noise caused by glazed or uneven brake contact surfaces
- Rotor replacement needs on front right Honda brake service
Installation Notes and Quality Assurance
Confirm rotor orientation before installation because this is a directional front right rotor. Verify discard thickness, hub dimensions, and wheel fitment against the vehicle before service, and inspect pads and caliper components at the same time. Part number 830-59061R is built to the listed specifications for the confirmed Honda Civic, Honda Insight, and Honda Accord applications.
Cross-reference note: This part cross-references Monroe Shocks & Struts (e.g., 172286) for the same application.
