Dynamite Friction 830-59043R Disc Brake Rotor - Front Right
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-59043R, is a vented disc brake rotor for the front right position. It features a slotted X drilled surface, a rust resistant coating, and a Geospec Silver Grey hat finish for a clean, corrosion-resistant appearance.
Built with a 300 mm outside diameter, 28 mm nominal thickness, and 26 mm discard thickness, this rotor is sized for select Acura and Honda front brake applications. The directional braking surface and 5-lug, 114.3 mm bolt circle layout support direct replacement use on vehicles such as the Acura TSX, Honda Accord, and Acura TL.
Key Features
- Part number 830-59043R
- DFC Geoperformance Rotor - Drilled and Slotted line
- Front right disc brake rotor
- Vented rotor construction
- Slotted X drilled surface type
- Directional brake surface
- Rust resistant coating
- Geospec Silver Grey hat finish
- 5 bolt holes with 114.3 mm bolt circle diameter
- 300 mm outside diameter
- Nominal thickness: 28 mm
- Discard thickness: 26 mm
Product Line Details
The DFC Geoperformance Rotor - Drilled and Slotted line is focused on brake rotors with a performance-oriented surface design and corrosion-resistant finishing. This rotor combines drilled and slotted face geometry with a vented structure to serve front brake systems on select Acura and Honda models, including the Acura TSX, Honda Accord, Acura TL, Honda Pilot, Acura MDX, Honda Odyssey, and Acura CL.
Vehicle Fitment
- Fits 2004-2014 Acura TSX, front right.
- Fits 2003-2012 Honda Accord, front right.
- Fits 2007-2008 Acura TL, front right.
- Fits 1999-2003 Acura TL, front right.
- Fits 2003-2008 Honda Pilot, front right.
- Fits 2001-2006 Acura MDX, front right.
- Fits 2004-2006 Acura TL, front right, base front brakes.
- Fits 1999-2004 Honda Odyssey, front right.
- Fits 2001-2003 Acura CL, front right.
Common Uses
- Replacing a worn front right brake rotor
- Correcting rotor scoring, grooves, or uneven wear
- Addressing brake pulsation from rotor thickness variation
- Restoring braking performance on drilled and slotted front brake setups
- Replacing a rusted or corroded rotor surface
Installation Notes
Verify rotor dimensions, bolt pattern, center hole diameter, and position before installation. This rotor is for the front right side only and uses a directional braking surface, so orientation matters during installation. Confirm brake pad condition and inspect caliper hardware, hub surface, and wheel bearings before fitting the new rotor.
Quality Assurance
This rotor is manufactured by Dynamite Friction with a rust resistant coating and a corrosion-resistant hat finish for added surface protection. Part number 830-59043R is built to match the listed vehicle applications and brake dimensions for direct replacement service.
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-59043R, is a vented disc brake rotor for the front right position. It features a slotted X drilled surface, a rust resistant coating, and a Geospec Silver Grey hat finish for a clean, corrosion-resistant appearance.
Built with a 300 mm outside diameter, 28 mm nominal thickness, and 26 mm discard thickness, this rotor is sized for select Acura and Honda front brake applications. The directional braking surface and 5-lug, 114.3 mm bolt circle layout support direct replacement use on vehicles such as the Acura TSX, Honda Accord, and Acura TL.
Key Features
- Part number 830-59043R
- DFC Geoperformance Rotor - Drilled and Slotted line
- Front right disc brake rotor
- Vented rotor construction
- Slotted X drilled surface type
- Directional brake surface
- Rust resistant coating
- Geospec Silver Grey hat finish
- 5 bolt holes with 114.3 mm bolt circle diameter
- 300 mm outside diameter
- Nominal thickness: 28 mm
- Discard thickness: 26 mm
Product Line Details
The DFC Geoperformance Rotor - Drilled and Slotted line is focused on brake rotors with a performance-oriented surface design and corrosion-resistant finishing. This rotor combines drilled and slotted face geometry with a vented structure to serve front brake systems on select Acura and Honda models, including the Acura TSX, Honda Accord, Acura TL, Honda Pilot, Acura MDX, Honda Odyssey, and Acura CL.
Vehicle Fitment
- Fits 2004-2014 Acura TSX, front right.
- Fits 2003-2012 Honda Accord, front right.
- Fits 2007-2008 Acura TL, front right.
- Fits 1999-2003 Acura TL, front right.
- Fits 2003-2008 Honda Pilot, front right.
- Fits 2001-2006 Acura MDX, front right.
- Fits 2004-2006 Acura TL, front right, base front brakes.
- Fits 1999-2004 Honda Odyssey, front right.
- Fits 2001-2003 Acura CL, front right.
Common Uses
- Replacing a worn front right brake rotor
- Correcting rotor scoring, grooves, or uneven wear
- Addressing brake pulsation from rotor thickness variation
- Restoring braking performance on drilled and slotted front brake setups
- Replacing a rusted or corroded rotor surface
Installation Notes
Verify rotor dimensions, bolt pattern, center hole diameter, and position before installation. This rotor is for the front right side only and uses a directional braking surface, so orientation matters during installation. Confirm brake pad condition and inspect caliper hardware, hub surface, and wheel bearings before fitting the new rotor.
Quality Assurance
This rotor is manufactured by Dynamite Friction with a rust resistant coating and a corrosion-resistant hat finish for added surface protection. Part number 830-59043R is built to match the listed vehicle applications and brake dimensions for direct replacement service.
Description
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-59043R, is a vented disc brake rotor for the front right position. It features a slotted X drilled surface, a rust resistant coating, and a Geospec Silver Grey hat finish for a clean, corrosion-resistant appearance.
Built with a 300 mm outside diameter, 28 mm nominal thickness, and 26 mm discard thickness, this rotor is sized for select Acura and Honda front brake applications. The directional braking surface and 5-lug, 114.3 mm bolt circle layout support direct replacement use on vehicles such as the Acura TSX, Honda Accord, and Acura TL.
Key Features
- Part number 830-59043R
- DFC Geoperformance Rotor - Drilled and Slotted line
- Front right disc brake rotor
- Vented rotor construction
- Slotted X drilled surface type
- Directional brake surface
- Rust resistant coating
- Geospec Silver Grey hat finish
- 5 bolt holes with 114.3 mm bolt circle diameter
- 300 mm outside diameter
- Nominal thickness: 28 mm
- Discard thickness: 26 mm
Product Line Details
The DFC Geoperformance Rotor - Drilled and Slotted line is focused on brake rotors with a performance-oriented surface design and corrosion-resistant finishing. This rotor combines drilled and slotted face geometry with a vented structure to serve front brake systems on select Acura and Honda models, including the Acura TSX, Honda Accord, Acura TL, Honda Pilot, Acura MDX, Honda Odyssey, and Acura CL.
Vehicle Fitment
- Fits 2004-2014 Acura TSX, front right.
- Fits 2003-2012 Honda Accord, front right.
- Fits 2007-2008 Acura TL, front right.
- Fits 1999-2003 Acura TL, front right.
- Fits 2003-2008 Honda Pilot, front right.
- Fits 2001-2006 Acura MDX, front right.
- Fits 2004-2006 Acura TL, front right, base front brakes.
- Fits 1999-2004 Honda Odyssey, front right.
- Fits 2001-2003 Acura CL, front right.
Common Uses
- Replacing a worn front right brake rotor
- Correcting rotor scoring, grooves, or uneven wear
- Addressing brake pulsation from rotor thickness variation
- Restoring braking performance on drilled and slotted front brake setups
- Replacing a rusted or corroded rotor surface
Installation Notes
Verify rotor dimensions, bolt pattern, center hole diameter, and position before installation. This rotor is for the front right side only and uses a directional braking surface, so orientation matters during installation. Confirm brake pad condition and inspect caliper hardware, hub surface, and wheel bearings before fitting the new rotor.
Quality Assurance
This rotor is manufactured by Dynamite Friction with a rust resistant coating and a corrosion-resistant hat finish for added surface protection. Part number 830-59043R is built to match the listed vehicle applications and brake dimensions for direct replacement service.
