Dynamite Friction 830-59026R Disc Brake Rotor - Rear Right
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-59026R, is a rear right disc brake rotor built for specific Honda and Acura applications. It combines a slotted X drilled surface with a rust resistant coating and Geospec Silver Grey hat finish for a clean, service-ready appearance.
Compatible with 1997-2001 Acura Integra, 1998-2002 Honda Accord, 2004-2005 Honda Civic, and 2002-2006 Acura RSX in the rear right position, this rotor is sized for a 260 mm outside diameter, 10 mm nominal thickness, and 8 mm discard thickness. The directional braking surface and solid rotor design support consistent rear brake service on the listed vehicles.
Key Features
- Part number 830-59026R for rear right brake service
- Slotted X drilled surface type with directional brake surface
- Rust resistant coating for added corrosion protection
- Geospec Silver Grey hat finish with plain disc finish
- 260 mm outside diameter, 10 mm nominal thickness, 8 mm discard thickness
- 5-lug pattern with 114.3 mm bolt circle diameter
- 64.2 mm center hole diameter and 12.6 mm bolt hole diameter
- Solid rotor construction for the specified rear application
DFC Geoperformance Rotor Line
The DFC Geoperformance Rotor line focuses on application-specific brake rotors with performance-oriented surface machining and corrosion protection. For Acura RSX, Honda Civic, Honda Accord, and Acura Integra rear brake service, this rotor line provides a direct-fit option matched to the listed dimensions and mounting pattern.
Detailed Description
Built by Dynamite Friction, this DFC Geoperformance Rotor is engineered for the rear right position on select Acura and Honda models. The drilled and slotted face helps maintain a clean braking surface, while the rust resistant coating and silver-grey hat finish support long-term appearance in everyday driving conditions. The rotor’s 5-bolt layout, 114.3 mm bolt circle, and 64.2 mm center bore align with the confirmed fitment data for the listed vehicles.
This part number 830-59026R is a direct replacement choice for drivers servicing the rear brake system on a 1997-2001 Acura Integra, 1998-2002 Honda Accord, 2004-2005 Honda Civic, or 2002-2006 Acura RSX. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Rotor Helps Address
- Rear brake rotor wear on the listed Acura and Honda applications
- Surface corrosion on exposed brake components
- Brake pulsation caused by an out-of-spec rotor
- Uneven braking performance from a worn rear rotor
- Service replacement needs for the rear right brake position
Installation Notes and Tips
Install only on the confirmed rear right position for the listed vehicles. Verify rotor dimensions, bolt pattern, center bore, and thickness before installation, and inspect pads, caliper condition, and hub surface during brake service. Because this rotor uses a directional braking surface, follow the correct orientation during installation.
Quality Assurance
Product quality is supported by the specified Geoperformance rotor construction, corrosion-resistant coating, and application-matched dimensions for the listed Acura and Honda fitments. No warranty information was provided in the product data.
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-59026R, is a rear right disc brake rotor built for specific Honda and Acura applications. It combines a slotted X drilled surface with a rust resistant coating and Geospec Silver Grey hat finish for a clean, service-ready appearance.
Compatible with 1997-2001 Acura Integra, 1998-2002 Honda Accord, 2004-2005 Honda Civic, and 2002-2006 Acura RSX in the rear right position, this rotor is sized for a 260 mm outside diameter, 10 mm nominal thickness, and 8 mm discard thickness. The directional braking surface and solid rotor design support consistent rear brake service on the listed vehicles.
Key Features
- Part number 830-59026R for rear right brake service
- Slotted X drilled surface type with directional brake surface
- Rust resistant coating for added corrosion protection
- Geospec Silver Grey hat finish with plain disc finish
- 260 mm outside diameter, 10 mm nominal thickness, 8 mm discard thickness
- 5-lug pattern with 114.3 mm bolt circle diameter
- 64.2 mm center hole diameter and 12.6 mm bolt hole diameter
- Solid rotor construction for the specified rear application
DFC Geoperformance Rotor Line
The DFC Geoperformance Rotor line focuses on application-specific brake rotors with performance-oriented surface machining and corrosion protection. For Acura RSX, Honda Civic, Honda Accord, and Acura Integra rear brake service, this rotor line provides a direct-fit option matched to the listed dimensions and mounting pattern.
Detailed Description
Built by Dynamite Friction, this DFC Geoperformance Rotor is engineered for the rear right position on select Acura and Honda models. The drilled and slotted face helps maintain a clean braking surface, while the rust resistant coating and silver-grey hat finish support long-term appearance in everyday driving conditions. The rotor’s 5-bolt layout, 114.3 mm bolt circle, and 64.2 mm center bore align with the confirmed fitment data for the listed vehicles.
This part number 830-59026R is a direct replacement choice for drivers servicing the rear brake system on a 1997-2001 Acura Integra, 1998-2002 Honda Accord, 2004-2005 Honda Civic, or 2002-2006 Acura RSX. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Rotor Helps Address
- Rear brake rotor wear on the listed Acura and Honda applications
- Surface corrosion on exposed brake components
- Brake pulsation caused by an out-of-spec rotor
- Uneven braking performance from a worn rear rotor
- Service replacement needs for the rear right brake position
Installation Notes and Tips
Install only on the confirmed rear right position for the listed vehicles. Verify rotor dimensions, bolt pattern, center bore, and thickness before installation, and inspect pads, caliper condition, and hub surface during brake service. Because this rotor uses a directional braking surface, follow the correct orientation during installation.
Quality Assurance
Product quality is supported by the specified Geoperformance rotor construction, corrosion-resistant coating, and application-matched dimensions for the listed Acura and Honda fitments. No warranty information was provided in the product data.
Original: $93.53
-65%$93.53
$32.74Description
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-59026R, is a rear right disc brake rotor built for specific Honda and Acura applications. It combines a slotted X drilled surface with a rust resistant coating and Geospec Silver Grey hat finish for a clean, service-ready appearance.
Compatible with 1997-2001 Acura Integra, 1998-2002 Honda Accord, 2004-2005 Honda Civic, and 2002-2006 Acura RSX in the rear right position, this rotor is sized for a 260 mm outside diameter, 10 mm nominal thickness, and 8 mm discard thickness. The directional braking surface and solid rotor design support consistent rear brake service on the listed vehicles.
Key Features
- Part number 830-59026R for rear right brake service
- Slotted X drilled surface type with directional brake surface
- Rust resistant coating for added corrosion protection
- Geospec Silver Grey hat finish with plain disc finish
- 260 mm outside diameter, 10 mm nominal thickness, 8 mm discard thickness
- 5-lug pattern with 114.3 mm bolt circle diameter
- 64.2 mm center hole diameter and 12.6 mm bolt hole diameter
- Solid rotor construction for the specified rear application
DFC Geoperformance Rotor Line
The DFC Geoperformance Rotor line focuses on application-specific brake rotors with performance-oriented surface machining and corrosion protection. For Acura RSX, Honda Civic, Honda Accord, and Acura Integra rear brake service, this rotor line provides a direct-fit option matched to the listed dimensions and mounting pattern.
Detailed Description
Built by Dynamite Friction, this DFC Geoperformance Rotor is engineered for the rear right position on select Acura and Honda models. The drilled and slotted face helps maintain a clean braking surface, while the rust resistant coating and silver-grey hat finish support long-term appearance in everyday driving conditions. The rotor’s 5-bolt layout, 114.3 mm bolt circle, and 64.2 mm center bore align with the confirmed fitment data for the listed vehicles.
This part number 830-59026R is a direct replacement choice for drivers servicing the rear brake system on a 1997-2001 Acura Integra, 1998-2002 Honda Accord, 2004-2005 Honda Civic, or 2002-2006 Acura RSX. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Rotor Helps Address
- Rear brake rotor wear on the listed Acura and Honda applications
- Surface corrosion on exposed brake components
- Brake pulsation caused by an out-of-spec rotor
- Uneven braking performance from a worn rear rotor
- Service replacement needs for the rear right brake position
Installation Notes and Tips
Install only on the confirmed rear right position for the listed vehicles. Verify rotor dimensions, bolt pattern, center bore, and thickness before installation, and inspect pads, caliper condition, and hub surface during brake service. Because this rotor uses a directional braking surface, follow the correct orientation during installation.
Quality Assurance
Product quality is supported by the specified Geoperformance rotor construction, corrosion-resistant coating, and application-matched dimensions for the listed Acura and Honda fitments. No warranty information was provided in the product data.
