Dynamite Friction 830-13023R Disc Brake Rotor - Rear Right
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-13023R, is a vented rear disc brake rotor built for specific Subaru, Toyota, and Scion applications. It features a directional slotted X-drilled surface, rust resistant coating, and Geospec Silver Grey hat finish for a clean, corrosion-resistant appearance.
Key Features
- Part number 830-13023R for rear right brake service
- Vented rotor construction with 290 mm outside diameter
- Directional slotted X-drilled braking surface
- Rust resistant coating for added corrosion protection
- Plain disc finish with Geospec Silver Grey hat finish
- 5-lug pattern with 100 mm bolt circle diameter
- Center hole diameter: 58 mm
- Nominal thickness: 18 mm; discard thickness: 16 mm
Product Details
The DFC Geoperformance Rotor line focuses on performance-oriented brake rotor construction with drilled and slotted surfaces that support consistent pad contact and heat management. This rear right rotor is built for vehicles that use a 5 x 100 bolt pattern and a vented rear disc setup, including select Toyota GR86, Subaru BRZ, Toyota 86, Scion FR-S, Subaru Legacy, and Subaru Outback applications. The 830-13023R rotor combines a directional braking surface with a corrosion-resistant finish to help maintain service life and appearance in everyday driving conditions.
Common Issues This Rotor Helps Address
- Rear brake rotor wear that has reached discard thickness
- Brake pulsation caused by uneven rotor surfaces
- Reduced braking consistency from heat buildup
- Corrosion on exposed rotor and hat surfaces
- Noise or vibration associated with worn rear rotors
Installation Notes and Fitment
Fits 2022-2026 Toyota GR86, rear right.
Fits 2022-2025 Subaru BRZ, rear right.
Fits 2016-2019 Subaru BRZ, rear right.
Fits 2020 Subaru BRZ, rear right, except Brembo Performance Brake System.
Fits 2017-2020 Toyota 86, rear right.
Fits 2013-2016 Scion FR-S, rear right.
Fits 2013-2015 Subaru BRZ, rear right, vented rear disc.
Fits 2010-2014 Subaru Legacy, rear right.
Fits 2010-2014 Subaru Outback, rear right.
Verify rotor dimensions, rear brake configuration, and vehicle brake package before installation. This part number 830-13023R is for the rear right position only and should be matched to the vehicle’s vented rear disc setup where noted.
Quality Assurance
Dynamite Friction supplies the DFC Geoperformance Rotor line with application-specific sizing and finish details for direct-fit brake service on listed vehicles. Part number 830-13023R is built to the published specifications shown above for accurate fitment and service replacement.
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-13023R, is a vented rear disc brake rotor built for specific Subaru, Toyota, and Scion applications. It features a directional slotted X-drilled surface, rust resistant coating, and Geospec Silver Grey hat finish for a clean, corrosion-resistant appearance.
Key Features
- Part number 830-13023R for rear right brake service
- Vented rotor construction with 290 mm outside diameter
- Directional slotted X-drilled braking surface
- Rust resistant coating for added corrosion protection
- Plain disc finish with Geospec Silver Grey hat finish
- 5-lug pattern with 100 mm bolt circle diameter
- Center hole diameter: 58 mm
- Nominal thickness: 18 mm; discard thickness: 16 mm
Product Details
The DFC Geoperformance Rotor line focuses on performance-oriented brake rotor construction with drilled and slotted surfaces that support consistent pad contact and heat management. This rear right rotor is built for vehicles that use a 5 x 100 bolt pattern and a vented rear disc setup, including select Toyota GR86, Subaru BRZ, Toyota 86, Scion FR-S, Subaru Legacy, and Subaru Outback applications. The 830-13023R rotor combines a directional braking surface with a corrosion-resistant finish to help maintain service life and appearance in everyday driving conditions.
Common Issues This Rotor Helps Address
- Rear brake rotor wear that has reached discard thickness
- Brake pulsation caused by uneven rotor surfaces
- Reduced braking consistency from heat buildup
- Corrosion on exposed rotor and hat surfaces
- Noise or vibration associated with worn rear rotors
Installation Notes and Fitment
Fits 2022-2026 Toyota GR86, rear right.
Fits 2022-2025 Subaru BRZ, rear right.
Fits 2016-2019 Subaru BRZ, rear right.
Fits 2020 Subaru BRZ, rear right, except Brembo Performance Brake System.
Fits 2017-2020 Toyota 86, rear right.
Fits 2013-2016 Scion FR-S, rear right.
Fits 2013-2015 Subaru BRZ, rear right, vented rear disc.
Fits 2010-2014 Subaru Legacy, rear right.
Fits 2010-2014 Subaru Outback, rear right.
Verify rotor dimensions, rear brake configuration, and vehicle brake package before installation. This part number 830-13023R is for the rear right position only and should be matched to the vehicle’s vented rear disc setup where noted.
Quality Assurance
Dynamite Friction supplies the DFC Geoperformance Rotor line with application-specific sizing and finish details for direct-fit brake service on listed vehicles. Part number 830-13023R is built to the published specifications shown above for accurate fitment and service replacement.
Original: $122.70
-65%$122.70
$42.95Description
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-13023R, is a vented rear disc brake rotor built for specific Subaru, Toyota, and Scion applications. It features a directional slotted X-drilled surface, rust resistant coating, and Geospec Silver Grey hat finish for a clean, corrosion-resistant appearance.
Key Features
- Part number 830-13023R for rear right brake service
- Vented rotor construction with 290 mm outside diameter
- Directional slotted X-drilled braking surface
- Rust resistant coating for added corrosion protection
- Plain disc finish with Geospec Silver Grey hat finish
- 5-lug pattern with 100 mm bolt circle diameter
- Center hole diameter: 58 mm
- Nominal thickness: 18 mm; discard thickness: 16 mm
Product Details
The DFC Geoperformance Rotor line focuses on performance-oriented brake rotor construction with drilled and slotted surfaces that support consistent pad contact and heat management. This rear right rotor is built for vehicles that use a 5 x 100 bolt pattern and a vented rear disc setup, including select Toyota GR86, Subaru BRZ, Toyota 86, Scion FR-S, Subaru Legacy, and Subaru Outback applications. The 830-13023R rotor combines a directional braking surface with a corrosion-resistant finish to help maintain service life and appearance in everyday driving conditions.
Common Issues This Rotor Helps Address
- Rear brake rotor wear that has reached discard thickness
- Brake pulsation caused by uneven rotor surfaces
- Reduced braking consistency from heat buildup
- Corrosion on exposed rotor and hat surfaces
- Noise or vibration associated with worn rear rotors
Installation Notes and Fitment
Fits 2022-2026 Toyota GR86, rear right.
Fits 2022-2025 Subaru BRZ, rear right.
Fits 2016-2019 Subaru BRZ, rear right.
Fits 2020 Subaru BRZ, rear right, except Brembo Performance Brake System.
Fits 2017-2020 Toyota 86, rear right.
Fits 2013-2016 Scion FR-S, rear right.
Fits 2013-2015 Subaru BRZ, rear right, vented rear disc.
Fits 2010-2014 Subaru Legacy, rear right.
Fits 2010-2014 Subaru Outback, rear right.
Verify rotor dimensions, rear brake configuration, and vehicle brake package before installation. This part number 830-13023R is for the rear right position only and should be matched to the vehicle’s vented rear disc setup where noted.
Quality Assurance
Dynamite Friction supplies the DFC Geoperformance Rotor line with application-specific sizing and finish details for direct-fit brake service on listed vehicles. Part number 830-13023R is built to the published specifications shown above for accurate fitment and service replacement.
