Dynamite Friction 830-03003L Disc Brake Rotor - Front Left
Front Left Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-03003L, is a vented disc brake rotor built for the front left position. It features a 320 mm outside diameter, 28 mm nominal thickness, and a 26.4 mm discard thickness for applications that require a precise OE-style brake rotor replacement.
Compatible with select Hyundai Nexo, Kia Sportage, Hyundai Sonata, Kia Optima, Hyundai Azera, and Kia Cadenza front left applications, this rotor uses a directional slotted X drilled surface and a rust resistant coating to support consistent braking performance and corrosion protection.
Key Features
- Part number 830-03003L
- Front left disc brake rotor for select Hyundai and Kia vehicles
- Vented rotor construction
- Slotted X drilled surface type
- Directional brake surface design
- 320 mm outside diameter
- 28 mm nominal thickness and 26.4 mm discard thickness
- 5-bolt pattern with 114.3 mm bolt circle diameter
- 69 mm center hole diameter
- Rust resistant coating with Geospec Silver Grey hat finish
DFC Geoperformance Rotor Line
The DFC Geoperformance Rotor line focuses on application-specific brake rotors with drilled and slotted surfaces for drivers who need a direct-fit replacement with performance-oriented rotor geometry. On this 830-03003L rotor, the plain disc finish, vented design, and directional slot pattern are matched to the listed Hyundai and Kia front left applications.
Detailed Description
This Dynamite Friction rotor is engineered for vehicles that use a 320 mm front left brake rotor with a 5-lug, 114.3 mm bolt circle layout. The drilled and slotted face helps maintain pad contact consistency, while the vented rotor design supports heat management during repeated stops. The Geospec Silver Grey hat finish and rust resistant coating add a clean, corrosion-resistant appearance on the hub area.
Fits 2019-2025 Hyundai Nexo, front left. Fits 2017-2022 Kia Sportage, front left, Electric Parking Brake. Fits 2020 Kia Optima, front left. Fits 2011-2017 Kia Optima, front left. Fits 2015-2019 Hyundai Sonata, front left, Electric Parking Brake. Fits 2018-2019 Kia Optima, front left, Electric Parking Brake. Fits 2012-2017 Hyundai Azera, front left. Fits 2014-2016 Kia Cadenza, front left.
This part cross-references no listed alternate part numbers for the same application.
What It Helps Address
- Front brake rotor wear on the listed Hyundai and Kia models
- Rotor scoring or uneven braking surface condition
- Corrosion on the rotor hat area
- Brake pulsation related to a worn front left rotor
- Replacement needs for drilled and slotted vented rotor applications
Installation Notes
Verify rotor diameter, thickness, center hole diameter, and bolt pattern before installation. This rotor is directional, so confirm left-side orientation and match the slot pattern to the vehicle position. For 2017-2022 Kia Sportage and 2015-2019 Hyundai Sonata applications, confirm the Electric Parking Brake configuration before ordering. Always inspect pads, caliper condition, and hub surface during brake service.
Quality Assurance
Dynamite Friction supplies application-specific brake components for direct-fit replacement use. This rotor includes a rust resistant coating and a Geospec Silver Grey hat finish for added surface protection on the hub area.
Front Left Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-03003L, is a vented disc brake rotor built for the front left position. It features a 320 mm outside diameter, 28 mm nominal thickness, and a 26.4 mm discard thickness for applications that require a precise OE-style brake rotor replacement.
Compatible with select Hyundai Nexo, Kia Sportage, Hyundai Sonata, Kia Optima, Hyundai Azera, and Kia Cadenza front left applications, this rotor uses a directional slotted X drilled surface and a rust resistant coating to support consistent braking performance and corrosion protection.
Key Features
- Part number 830-03003L
- Front left disc brake rotor for select Hyundai and Kia vehicles
- Vented rotor construction
- Slotted X drilled surface type
- Directional brake surface design
- 320 mm outside diameter
- 28 mm nominal thickness and 26.4 mm discard thickness
- 5-bolt pattern with 114.3 mm bolt circle diameter
- 69 mm center hole diameter
- Rust resistant coating with Geospec Silver Grey hat finish
DFC Geoperformance Rotor Line
The DFC Geoperformance Rotor line focuses on application-specific brake rotors with drilled and slotted surfaces for drivers who need a direct-fit replacement with performance-oriented rotor geometry. On this 830-03003L rotor, the plain disc finish, vented design, and directional slot pattern are matched to the listed Hyundai and Kia front left applications.
Detailed Description
This Dynamite Friction rotor is engineered for vehicles that use a 320 mm front left brake rotor with a 5-lug, 114.3 mm bolt circle layout. The drilled and slotted face helps maintain pad contact consistency, while the vented rotor design supports heat management during repeated stops. The Geospec Silver Grey hat finish and rust resistant coating add a clean, corrosion-resistant appearance on the hub area.
Fits 2019-2025 Hyundai Nexo, front left. Fits 2017-2022 Kia Sportage, front left, Electric Parking Brake. Fits 2020 Kia Optima, front left. Fits 2011-2017 Kia Optima, front left. Fits 2015-2019 Hyundai Sonata, front left, Electric Parking Brake. Fits 2018-2019 Kia Optima, front left, Electric Parking Brake. Fits 2012-2017 Hyundai Azera, front left. Fits 2014-2016 Kia Cadenza, front left.
This part cross-references no listed alternate part numbers for the same application.
What It Helps Address
- Front brake rotor wear on the listed Hyundai and Kia models
- Rotor scoring or uneven braking surface condition
- Corrosion on the rotor hat area
- Brake pulsation related to a worn front left rotor
- Replacement needs for drilled and slotted vented rotor applications
Installation Notes
Verify rotor diameter, thickness, center hole diameter, and bolt pattern before installation. This rotor is directional, so confirm left-side orientation and match the slot pattern to the vehicle position. For 2017-2022 Kia Sportage and 2015-2019 Hyundai Sonata applications, confirm the Electric Parking Brake configuration before ordering. Always inspect pads, caliper condition, and hub surface during brake service.
Quality Assurance
Dynamite Friction supplies application-specific brake components for direct-fit replacement use. This rotor includes a rust resistant coating and a Geospec Silver Grey hat finish for added surface protection on the hub area.
Original: $163.92
-65%$163.92
$57.37Description
Front Left Drilled and Slotted Rotor
The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-03003L, is a vented disc brake rotor built for the front left position. It features a 320 mm outside diameter, 28 mm nominal thickness, and a 26.4 mm discard thickness for applications that require a precise OE-style brake rotor replacement.
Compatible with select Hyundai Nexo, Kia Sportage, Hyundai Sonata, Kia Optima, Hyundai Azera, and Kia Cadenza front left applications, this rotor uses a directional slotted X drilled surface and a rust resistant coating to support consistent braking performance and corrosion protection.
Key Features
- Part number 830-03003L
- Front left disc brake rotor for select Hyundai and Kia vehicles
- Vented rotor construction
- Slotted X drilled surface type
- Directional brake surface design
- 320 mm outside diameter
- 28 mm nominal thickness and 26.4 mm discard thickness
- 5-bolt pattern with 114.3 mm bolt circle diameter
- 69 mm center hole diameter
- Rust resistant coating with Geospec Silver Grey hat finish
DFC Geoperformance Rotor Line
The DFC Geoperformance Rotor line focuses on application-specific brake rotors with drilled and slotted surfaces for drivers who need a direct-fit replacement with performance-oriented rotor geometry. On this 830-03003L rotor, the plain disc finish, vented design, and directional slot pattern are matched to the listed Hyundai and Kia front left applications.
Detailed Description
This Dynamite Friction rotor is engineered for vehicles that use a 320 mm front left brake rotor with a 5-lug, 114.3 mm bolt circle layout. The drilled and slotted face helps maintain pad contact consistency, while the vented rotor design supports heat management during repeated stops. The Geospec Silver Grey hat finish and rust resistant coating add a clean, corrosion-resistant appearance on the hub area.
Fits 2019-2025 Hyundai Nexo, front left. Fits 2017-2022 Kia Sportage, front left, Electric Parking Brake. Fits 2020 Kia Optima, front left. Fits 2011-2017 Kia Optima, front left. Fits 2015-2019 Hyundai Sonata, front left, Electric Parking Brake. Fits 2018-2019 Kia Optima, front left, Electric Parking Brake. Fits 2012-2017 Hyundai Azera, front left. Fits 2014-2016 Kia Cadenza, front left.
This part cross-references no listed alternate part numbers for the same application.
What It Helps Address
- Front brake rotor wear on the listed Hyundai and Kia models
- Rotor scoring or uneven braking surface condition
- Corrosion on the rotor hat area
- Brake pulsation related to a worn front left rotor
- Replacement needs for drilled and slotted vented rotor applications
Installation Notes
Verify rotor diameter, thickness, center hole diameter, and bolt pattern before installation. This rotor is directional, so confirm left-side orientation and match the slot pattern to the vehicle position. For 2017-2022 Kia Sportage and 2015-2019 Hyundai Sonata applications, confirm the Electric Parking Brake configuration before ordering. Always inspect pads, caliper condition, and hub surface during brake service.
Quality Assurance
Dynamite Friction supplies application-specific brake components for direct-fit replacement use. This rotor includes a rust resistant coating and a Geospec Silver Grey hat finish for added surface protection on the hub area.
