Dynamite Friction 633-76068R Disc Brake Rotor - Front Right
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-76068R, is a front right disc brake rotor built for select Toyota, Scion, and Pontiac applications. It features a vented design with a directional slotted X drilled surface, zinc black hat finish, and rust resistant coating for a clean, service-ready appearance.
Key Features
- Part number 633-76068R for front right brake service
- Slotted X drilled rotor surface for directional braking performance
- Vented disc brake rotor construction
- Zinc black hat finish with rust resistant coating
- 275 mm outside diameter and 55.1 mm center hole diameter
- 5-lug pattern with 100 mm bolt circle diameter
- Nominal thickness: 25 mm; discard thickness: 23 mm
Product Line Details
The DFC Brake Rotor - Drilled and Slotted - Black line from Dynamite Friction focuses on application-specific brake rotors with a finished appearance and corrosion protection. This rotor is built for vehicles that use a 5-lug, 100 mm bolt pattern and a directional front right rotor configuration.
Detailed Description
Part number 633-76068R is a direct-fit front right disc brake rotor for select 2000-2010 Toyota Celica, Toyota Corolla, Toyota Matrix, Scion tC, and Pontiac Vibe applications. It is also listed for 2003-2008 Toyota Corolla variants, including 2004 production split coverage for vehicles built before and after 4/03, with Japan- and USA-built notes where specified. The rotor’s vented construction, drilled and slotted braking surface, and plain disc finish support consistent brake contact while the zinc black hat finish and rust resistant coating help maintain appearance over time.
Vehicle Fitment
- Fits 2005-2010 Scion tC, front right.
- Fits 2003-2008 Pontiac Vibe, front right.
- Fits 2005-2008 Toyota Corolla, front right, Made in Japan.
- Fits 2005-2008 Toyota Corolla, front right, Made in USA.
- Fits 2003-2008 Toyota Matrix, front right.
- Fits 2005-2006 Toyota Corolla, front right.
- Fits 2000-2005 Toyota Celica, front right.
- Fits 2004 Toyota Corolla, front right, Vehicle Production Date From 4/03; Made in Japan.
- Fits 2004 Toyota Corolla, front right, Vehicle Production Date From 4/03; Made in USA.
- Fits 2003 Toyota Corolla, front right, Vehicle Production Date To 4/03.
What It Helps Address
- Front brake rotor wear on supported Toyota, Scion, and Pontiac models
- Rotor surface corrosion on exposed brake components
- Brake pulsation related to worn or damaged rotors
- Uneven braking feel from a compromised front right rotor
- Replacement needs for 5-lug, 100 mm bolt pattern vehicles
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and vehicle production date before installation, especially on 2004 Toyota Corolla applications with build-date-specific coverage. This rotor is directional, so install it on the front right position only as listed. Confirm the 5-bolt, 100 mm bolt circle and 14.5 mm lug hole diameter match the vehicle before service.
Quality Assurance
Built by Dynamite Friction for listed OE-style applications, this rotor uses a rust resistant coating and zinc black hat finish to support long-term appearance and serviceability. Part number 633-76068R is specified for the exact fitment rows shown above.
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-76068R, is a front right disc brake rotor built for select Toyota, Scion, and Pontiac applications. It features a vented design with a directional slotted X drilled surface, zinc black hat finish, and rust resistant coating for a clean, service-ready appearance.
Key Features
- Part number 633-76068R for front right brake service
- Slotted X drilled rotor surface for directional braking performance
- Vented disc brake rotor construction
- Zinc black hat finish with rust resistant coating
- 275 mm outside diameter and 55.1 mm center hole diameter
- 5-lug pattern with 100 mm bolt circle diameter
- Nominal thickness: 25 mm; discard thickness: 23 mm
Product Line Details
The DFC Brake Rotor - Drilled and Slotted - Black line from Dynamite Friction focuses on application-specific brake rotors with a finished appearance and corrosion protection. This rotor is built for vehicles that use a 5-lug, 100 mm bolt pattern and a directional front right rotor configuration.
Detailed Description
Part number 633-76068R is a direct-fit front right disc brake rotor for select 2000-2010 Toyota Celica, Toyota Corolla, Toyota Matrix, Scion tC, and Pontiac Vibe applications. It is also listed for 2003-2008 Toyota Corolla variants, including 2004 production split coverage for vehicles built before and after 4/03, with Japan- and USA-built notes where specified. The rotor’s vented construction, drilled and slotted braking surface, and plain disc finish support consistent brake contact while the zinc black hat finish and rust resistant coating help maintain appearance over time.
Vehicle Fitment
- Fits 2005-2010 Scion tC, front right.
- Fits 2003-2008 Pontiac Vibe, front right.
- Fits 2005-2008 Toyota Corolla, front right, Made in Japan.
- Fits 2005-2008 Toyota Corolla, front right, Made in USA.
- Fits 2003-2008 Toyota Matrix, front right.
- Fits 2005-2006 Toyota Corolla, front right.
- Fits 2000-2005 Toyota Celica, front right.
- Fits 2004 Toyota Corolla, front right, Vehicle Production Date From 4/03; Made in Japan.
- Fits 2004 Toyota Corolla, front right, Vehicle Production Date From 4/03; Made in USA.
- Fits 2003 Toyota Corolla, front right, Vehicle Production Date To 4/03.
What It Helps Address
- Front brake rotor wear on supported Toyota, Scion, and Pontiac models
- Rotor surface corrosion on exposed brake components
- Brake pulsation related to worn or damaged rotors
- Uneven braking feel from a compromised front right rotor
- Replacement needs for 5-lug, 100 mm bolt pattern vehicles
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and vehicle production date before installation, especially on 2004 Toyota Corolla applications with build-date-specific coverage. This rotor is directional, so install it on the front right position only as listed. Confirm the 5-bolt, 100 mm bolt circle and 14.5 mm lug hole diameter match the vehicle before service.
Quality Assurance
Built by Dynamite Friction for listed OE-style applications, this rotor uses a rust resistant coating and zinc black hat finish to support long-term appearance and serviceability. Part number 633-76068R is specified for the exact fitment rows shown above.
Description
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-76068R, is a front right disc brake rotor built for select Toyota, Scion, and Pontiac applications. It features a vented design with a directional slotted X drilled surface, zinc black hat finish, and rust resistant coating for a clean, service-ready appearance.
Key Features
- Part number 633-76068R for front right brake service
- Slotted X drilled rotor surface for directional braking performance
- Vented disc brake rotor construction
- Zinc black hat finish with rust resistant coating
- 275 mm outside diameter and 55.1 mm center hole diameter
- 5-lug pattern with 100 mm bolt circle diameter
- Nominal thickness: 25 mm; discard thickness: 23 mm
Product Line Details
The DFC Brake Rotor - Drilled and Slotted - Black line from Dynamite Friction focuses on application-specific brake rotors with a finished appearance and corrosion protection. This rotor is built for vehicles that use a 5-lug, 100 mm bolt pattern and a directional front right rotor configuration.
Detailed Description
Part number 633-76068R is a direct-fit front right disc brake rotor for select 2000-2010 Toyota Celica, Toyota Corolla, Toyota Matrix, Scion tC, and Pontiac Vibe applications. It is also listed for 2003-2008 Toyota Corolla variants, including 2004 production split coverage for vehicles built before and after 4/03, with Japan- and USA-built notes where specified. The rotor’s vented construction, drilled and slotted braking surface, and plain disc finish support consistent brake contact while the zinc black hat finish and rust resistant coating help maintain appearance over time.
Vehicle Fitment
- Fits 2005-2010 Scion tC, front right.
- Fits 2003-2008 Pontiac Vibe, front right.
- Fits 2005-2008 Toyota Corolla, front right, Made in Japan.
- Fits 2005-2008 Toyota Corolla, front right, Made in USA.
- Fits 2003-2008 Toyota Matrix, front right.
- Fits 2005-2006 Toyota Corolla, front right.
- Fits 2000-2005 Toyota Celica, front right.
- Fits 2004 Toyota Corolla, front right, Vehicle Production Date From 4/03; Made in Japan.
- Fits 2004 Toyota Corolla, front right, Vehicle Production Date From 4/03; Made in USA.
- Fits 2003 Toyota Corolla, front right, Vehicle Production Date To 4/03.
What It Helps Address
- Front brake rotor wear on supported Toyota, Scion, and Pontiac models
- Rotor surface corrosion on exposed brake components
- Brake pulsation related to worn or damaged rotors
- Uneven braking feel from a compromised front right rotor
- Replacement needs for 5-lug, 100 mm bolt pattern vehicles
Installation Notes and Tips
Verify rotor dimensions, hub fitment, and vehicle production date before installation, especially on 2004 Toyota Corolla applications with build-date-specific coverage. This rotor is directional, so install it on the front right position only as listed. Confirm the 5-bolt, 100 mm bolt circle and 14.5 mm lug hole diameter match the vehicle before service.
Quality Assurance
Built by Dynamite Friction for listed OE-style applications, this rotor uses a rust resistant coating and zinc black hat finish to support long-term appearance and serviceability. Part number 633-76068R is specified for the exact fitment rows shown above.
