Dynamite Friction 633-67113R Disc Brake Rotor - Rear Right
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-67113R, is a rear right disc brake rotor built for Nissan applications that call for a 5-lug, directional rotor with a black zinc hat finish. It combines a slotted X drilled surface with rust-resistant coating protection for a clean service replacement on select Nissan Altima and Nissan Kicks models.
Key Features
- Part number 633-67113R for rear right brake service
- Slotted X drilled braking surface for directional operation
- 280 mm outside diameter with 47.3 mm height
- Nominal thickness: 9.5 mm; discard thickness: 8.6 mm
- 5 bolt holes and 5 stud/lug holes
- 68 mm center hole diameter and 114.3 mm bolt circle diameter
- Plain disc finish with zinc black hat finish
- Rust resistant coating included
Product Details
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on rotor construction and finish details that matter during brake service. This rotor uses a directional braking surface, which means the vane and slot pattern is engineered for the specified side and position. For drivers servicing a Nissan Altima rear right brake rotor or a Nissan Kicks rear right brake rotor, 633-67113R provides the correct fitment profile for the listed vehicles and configurations.
Compatible With 2019-2025 Nissan Altima, rear right; 2021 Nissan Kicks, rear right; 2022-2024 Nissan Kicks, rear right with rear disc; and 2025-2026 Nissan Kicks, rear right. It also fits 2019-2021 Nissan Altima, rear right with electronic parking brake (switch applied). This part cross-references no listed alternate part numbers in the provided data.
What This Rotor Helps Address
- Rear brake rotor wear that requires replacement at the specified discard thickness
- Brake pulsation caused by rotor surface irregularity
- Corrosion on exposed rotor surfaces in daily driving conditions
- Service needs for a rear right Nissan Altima brake rotor replacement
- Service needs for a rear right Nissan Kicks brake rotor replacement
Installation Notes
Install only on the rear right position listed in the fitment data. Confirm rotor dimensions, bolt pattern, center bore, and directional orientation before installation. Because this rotor is directional, match the side and rotation requirements exactly. Verify brake system configuration on 2019-2021 Nissan Altima models with electronic parking brake and on 2022-2024 Nissan Kicks models with rear disc brakes.
Quality Assurance
Dynamite Friction supplies this rotor with a rust resistant coating and a zinc black hat finish for added surface protection during service and storage. The part is built to the stated dimensional specifications for the listed Nissan Altima and Nissan Kicks applications.
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-67113R, is a rear right disc brake rotor built for Nissan applications that call for a 5-lug, directional rotor with a black zinc hat finish. It combines a slotted X drilled surface with rust-resistant coating protection for a clean service replacement on select Nissan Altima and Nissan Kicks models.
Key Features
- Part number 633-67113R for rear right brake service
- Slotted X drilled braking surface for directional operation
- 280 mm outside diameter with 47.3 mm height
- Nominal thickness: 9.5 mm; discard thickness: 8.6 mm
- 5 bolt holes and 5 stud/lug holes
- 68 mm center hole diameter and 114.3 mm bolt circle diameter
- Plain disc finish with zinc black hat finish
- Rust resistant coating included
Product Details
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on rotor construction and finish details that matter during brake service. This rotor uses a directional braking surface, which means the vane and slot pattern is engineered for the specified side and position. For drivers servicing a Nissan Altima rear right brake rotor or a Nissan Kicks rear right brake rotor, 633-67113R provides the correct fitment profile for the listed vehicles and configurations.
Compatible With 2019-2025 Nissan Altima, rear right; 2021 Nissan Kicks, rear right; 2022-2024 Nissan Kicks, rear right with rear disc; and 2025-2026 Nissan Kicks, rear right. It also fits 2019-2021 Nissan Altima, rear right with electronic parking brake (switch applied). This part cross-references no listed alternate part numbers in the provided data.
What This Rotor Helps Address
- Rear brake rotor wear that requires replacement at the specified discard thickness
- Brake pulsation caused by rotor surface irregularity
- Corrosion on exposed rotor surfaces in daily driving conditions
- Service needs for a rear right Nissan Altima brake rotor replacement
- Service needs for a rear right Nissan Kicks brake rotor replacement
Installation Notes
Install only on the rear right position listed in the fitment data. Confirm rotor dimensions, bolt pattern, center bore, and directional orientation before installation. Because this rotor is directional, match the side and rotation requirements exactly. Verify brake system configuration on 2019-2021 Nissan Altima models with electronic parking brake and on 2022-2024 Nissan Kicks models with rear disc brakes.
Quality Assurance
Dynamite Friction supplies this rotor with a rust resistant coating and a zinc black hat finish for added surface protection during service and storage. The part is built to the stated dimensional specifications for the listed Nissan Altima and Nissan Kicks applications.
Description
Rear Right Drilled and Slotted Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-67113R, is a rear right disc brake rotor built for Nissan applications that call for a 5-lug, directional rotor with a black zinc hat finish. It combines a slotted X drilled surface with rust-resistant coating protection for a clean service replacement on select Nissan Altima and Nissan Kicks models.
Key Features
- Part number 633-67113R for rear right brake service
- Slotted X drilled braking surface for directional operation
- 280 mm outside diameter with 47.3 mm height
- Nominal thickness: 9.5 mm; discard thickness: 8.6 mm
- 5 bolt holes and 5 stud/lug holes
- 68 mm center hole diameter and 114.3 mm bolt circle diameter
- Plain disc finish with zinc black hat finish
- Rust resistant coating included
Product Details
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on rotor construction and finish details that matter during brake service. This rotor uses a directional braking surface, which means the vane and slot pattern is engineered for the specified side and position. For drivers servicing a Nissan Altima rear right brake rotor or a Nissan Kicks rear right brake rotor, 633-67113R provides the correct fitment profile for the listed vehicles and configurations.
Compatible With 2019-2025 Nissan Altima, rear right; 2021 Nissan Kicks, rear right; 2022-2024 Nissan Kicks, rear right with rear disc; and 2025-2026 Nissan Kicks, rear right. It also fits 2019-2021 Nissan Altima, rear right with electronic parking brake (switch applied). This part cross-references no listed alternate part numbers in the provided data.
What This Rotor Helps Address
- Rear brake rotor wear that requires replacement at the specified discard thickness
- Brake pulsation caused by rotor surface irregularity
- Corrosion on exposed rotor surfaces in daily driving conditions
- Service needs for a rear right Nissan Altima brake rotor replacement
- Service needs for a rear right Nissan Kicks brake rotor replacement
Installation Notes
Install only on the rear right position listed in the fitment data. Confirm rotor dimensions, bolt pattern, center bore, and directional orientation before installation. Because this rotor is directional, match the side and rotation requirements exactly. Verify brake system configuration on 2019-2021 Nissan Altima models with electronic parking brake and on 2022-2024 Nissan Kicks models with rear disc brakes.
Quality Assurance
Dynamite Friction supplies this rotor with a rust resistant coating and a zinc black hat finish for added surface protection during service and storage. The part is built to the stated dimensional specifications for the listed Nissan Altima and Nissan Kicks applications.
