Dynamite Friction 633-67113L Disc Brake Rotor - Rear Left
Drilled and Slotted Rear Left Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-67113L, is a rear left disc brake rotor built for select Nissan applications. It combines a slotted X drilled surface with a black zinc hat finish and rust resistant coating for a clean, service-ready appearance.
Compatible With Nissan Altima and Nissan Kicks rear left brake service, this rotor is sized at 280 mm outside diameter with a 68 mm center hole and 5-lug, 114.3 mm bolt circle fitment. The directional braking surface and 9.5 mm nominal thickness support consistent rear brake replacement on the listed vehicles.
Key Features
- Part number 633-67113L
- Disc brake rotor for rear left position
- Slotted X drilled surface type
- Black zinc hat finish with rust resistant coating
- 280 mm outside diameter
- 9.5 mm nominal thickness and 8.6 mm discard thickness
- 5 bolt holes and 5 stud/lug holes
- Directional brake surface design
- 68 mm center hole diameter
- 114.3 mm bolt circle diameter
Product Details
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on rotor construction and corrosion protection for everyday brake service. On this application, the rotor uses a plain disc finish with a black zinc hat finish, giving the hub area added resistance to rust while maintaining the specified braking surface geometry. For shoppers searching for a rear left Nissan Altima brake rotor or rear left Nissan Kicks drilled and slotted rotor, 633-67113L matches the listed fitment and dimensions.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Rotor Can Address
- Rear brake rotor wear at or near discard thickness
- Brake pulsation from an uneven or worn rotor surface
- Surface corrosion on the rotor hat area
- Noise or inconsistent braking from a damaged rear rotor
- Need for a direct replacement rear left rotor on listed Nissan models
Installation Notes and Fitment
Fits 2025-2026 Nissan Kicks, rear left.
Fits 2021 Nissan Kicks, rear left.
Fits 2022-2024 Nissan Kicks, rear left, rear disc.
Fits 2025 Nissan Altima, rear left.
Fits 2023-2024 Nissan Altima, rear left, VC-Turbo: electric parking brake.
Fits 2019-2022 Nissan Altima, rear left.
Fits 2019-2021 Nissan Altima, rear left, electronic parking brake (switch applied).
Verify rotor side, brake system configuration, and dimensions before installation. This rotor is directional, so install it in the correct rear left position as listed for the vehicle application.
Quality Assurance
Dynamite Friction supplies this rotor as a specification-based replacement part built around the listed dimensions, finish, and fitment data. Part number 633-67113L is cataloged for the confirmed Nissan Altima and Nissan Kicks rear left applications shown above.
Drilled and Slotted Rear Left Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-67113L, is a rear left disc brake rotor built for select Nissan applications. It combines a slotted X drilled surface with a black zinc hat finish and rust resistant coating for a clean, service-ready appearance.
Compatible With Nissan Altima and Nissan Kicks rear left brake service, this rotor is sized at 280 mm outside diameter with a 68 mm center hole and 5-lug, 114.3 mm bolt circle fitment. The directional braking surface and 9.5 mm nominal thickness support consistent rear brake replacement on the listed vehicles.
Key Features
- Part number 633-67113L
- Disc brake rotor for rear left position
- Slotted X drilled surface type
- Black zinc hat finish with rust resistant coating
- 280 mm outside diameter
- 9.5 mm nominal thickness and 8.6 mm discard thickness
- 5 bolt holes and 5 stud/lug holes
- Directional brake surface design
- 68 mm center hole diameter
- 114.3 mm bolt circle diameter
Product Details
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on rotor construction and corrosion protection for everyday brake service. On this application, the rotor uses a plain disc finish with a black zinc hat finish, giving the hub area added resistance to rust while maintaining the specified braking surface geometry. For shoppers searching for a rear left Nissan Altima brake rotor or rear left Nissan Kicks drilled and slotted rotor, 633-67113L matches the listed fitment and dimensions.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Rotor Can Address
- Rear brake rotor wear at or near discard thickness
- Brake pulsation from an uneven or worn rotor surface
- Surface corrosion on the rotor hat area
- Noise or inconsistent braking from a damaged rear rotor
- Need for a direct replacement rear left rotor on listed Nissan models
Installation Notes and Fitment
Fits 2025-2026 Nissan Kicks, rear left.
Fits 2021 Nissan Kicks, rear left.
Fits 2022-2024 Nissan Kicks, rear left, rear disc.
Fits 2025 Nissan Altima, rear left.
Fits 2023-2024 Nissan Altima, rear left, VC-Turbo: electric parking brake.
Fits 2019-2022 Nissan Altima, rear left.
Fits 2019-2021 Nissan Altima, rear left, electronic parking brake (switch applied).
Verify rotor side, brake system configuration, and dimensions before installation. This rotor is directional, so install it in the correct rear left position as listed for the vehicle application.
Quality Assurance
Dynamite Friction supplies this rotor as a specification-based replacement part built around the listed dimensions, finish, and fitment data. Part number 633-67113L is cataloged for the confirmed Nissan Altima and Nissan Kicks rear left applications shown above.
Description
Drilled and Slotted Rear Left Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-67113L, is a rear left disc brake rotor built for select Nissan applications. It combines a slotted X drilled surface with a black zinc hat finish and rust resistant coating for a clean, service-ready appearance.
Compatible With Nissan Altima and Nissan Kicks rear left brake service, this rotor is sized at 280 mm outside diameter with a 68 mm center hole and 5-lug, 114.3 mm bolt circle fitment. The directional braking surface and 9.5 mm nominal thickness support consistent rear brake replacement on the listed vehicles.
Key Features
- Part number 633-67113L
- Disc brake rotor for rear left position
- Slotted X drilled surface type
- Black zinc hat finish with rust resistant coating
- 280 mm outside diameter
- 9.5 mm nominal thickness and 8.6 mm discard thickness
- 5 bolt holes and 5 stud/lug holes
- Directional brake surface design
- 68 mm center hole diameter
- 114.3 mm bolt circle diameter
Product Details
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on rotor construction and corrosion protection for everyday brake service. On this application, the rotor uses a plain disc finish with a black zinc hat finish, giving the hub area added resistance to rust while maintaining the specified braking surface geometry. For shoppers searching for a rear left Nissan Altima brake rotor or rear left Nissan Kicks drilled and slotted rotor, 633-67113L matches the listed fitment and dimensions.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Issues This Rotor Can Address
- Rear brake rotor wear at or near discard thickness
- Brake pulsation from an uneven or worn rotor surface
- Surface corrosion on the rotor hat area
- Noise or inconsistent braking from a damaged rear rotor
- Need for a direct replacement rear left rotor on listed Nissan models
Installation Notes and Fitment
Fits 2025-2026 Nissan Kicks, rear left.
Fits 2021 Nissan Kicks, rear left.
Fits 2022-2024 Nissan Kicks, rear left, rear disc.
Fits 2025 Nissan Altima, rear left.
Fits 2023-2024 Nissan Altima, rear left, VC-Turbo: electric parking brake.
Fits 2019-2022 Nissan Altima, rear left.
Fits 2019-2021 Nissan Altima, rear left, electronic parking brake (switch applied).
Verify rotor side, brake system configuration, and dimensions before installation. This rotor is directional, so install it in the correct rear left position as listed for the vehicle application.
Quality Assurance
Dynamite Friction supplies this rotor as a specification-based replacement part built around the listed dimensions, finish, and fitment data. Part number 633-67113L is cataloged for the confirmed Nissan Altima and Nissan Kicks rear left applications shown above.
