Dynamite Friction 633-59037R Disc Brake Rotor - Front Right
Dynamite Friction DFC Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-59037R, is a vented front right disc brake rotor built for specific Honda applications. It combines a slotted X drilled surface with a black zinc hat finish and rust-resistant coating for a clean, service-ready appearance.
Key Features
- Part number: 633-59037R
- Disc brake rotor for the front right position
- Slotted X drilled brake surface for directional braking performance
- Vented rotor design
- Outside diameter: 293 mm
- Nominal thickness: 25 mm
- Discard thickness: 23 mm
- Center hole diameter: 64.1 mm
- 5-bolt, 5-lug pattern with 114.3 mm bolt circle diameter
- Black zinc hat finish with rust-resistant coating
Product Details
This DFC rotor is engineered for Honda Civic, Honda Accord, and Honda HR-V front right brake applications listed below. The directional slotted X drilled surface is paired with a plain disc finish and vented construction to match the fitment and braking layout of the specified vehicles. The black hat finish helps maintain a cleaner appearance in the wheel area, while the rust-resistant coating adds protection to exposed surfaces. If you are searching for a Honda Civic front right drilled and slotted rotor or a Honda Accord front right brake rotor, part number 633-59037R is the exact reference to use.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rotor wear that requires replacement at the front right corner
- Brake surface scoring or uneven contact on the existing rotor
- Corrosion on exposed rotor and hat surfaces
- Brake service needs on Honda Civic, Honda Accord, or Honda HR-V front right applications
- Replacement needs for a vented, drilled and slotted rotor with the correct 5-lug fitment
Installation Notes and Tips
Verify rotor dimensions, bolt circle diameter, center hole diameter, and position before installation. This rotor is directional, so confirm the correct side and orientation during service. For best results, inspect pads, caliper condition, and hub surfaces before installing the new rotor. Confirm compatibility with the exact vehicle year and trim listed below.
- Fits 2025-2026 Honda Civic, front right
- Fits 2023-2025 Honda Accord, front right
- Fits 2013-2017 Honda Accord, front right
- Fits 2016-2022 Honda HR-V, front right
Quality Assurance
Dynamite Friction DFC brake components are built around application-specific fitment and measured rotor specifications for accurate replacement selection. Part number 633-59037R is listed for the confirmed Honda applications shown above, including Honda Civic, Honda Accord, and Honda HR-V front right use.
Dynamite Friction DFC Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-59037R, is a vented front right disc brake rotor built for specific Honda applications. It combines a slotted X drilled surface with a black zinc hat finish and rust-resistant coating for a clean, service-ready appearance.
Key Features
- Part number: 633-59037R
- Disc brake rotor for the front right position
- Slotted X drilled brake surface for directional braking performance
- Vented rotor design
- Outside diameter: 293 mm
- Nominal thickness: 25 mm
- Discard thickness: 23 mm
- Center hole diameter: 64.1 mm
- 5-bolt, 5-lug pattern with 114.3 mm bolt circle diameter
- Black zinc hat finish with rust-resistant coating
Product Details
This DFC rotor is engineered for Honda Civic, Honda Accord, and Honda HR-V front right brake applications listed below. The directional slotted X drilled surface is paired with a plain disc finish and vented construction to match the fitment and braking layout of the specified vehicles. The black hat finish helps maintain a cleaner appearance in the wheel area, while the rust-resistant coating adds protection to exposed surfaces. If you are searching for a Honda Civic front right drilled and slotted rotor or a Honda Accord front right brake rotor, part number 633-59037R is the exact reference to use.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rotor wear that requires replacement at the front right corner
- Brake surface scoring or uneven contact on the existing rotor
- Corrosion on exposed rotor and hat surfaces
- Brake service needs on Honda Civic, Honda Accord, or Honda HR-V front right applications
- Replacement needs for a vented, drilled and slotted rotor with the correct 5-lug fitment
Installation Notes and Tips
Verify rotor dimensions, bolt circle diameter, center hole diameter, and position before installation. This rotor is directional, so confirm the correct side and orientation during service. For best results, inspect pads, caliper condition, and hub surfaces before installing the new rotor. Confirm compatibility with the exact vehicle year and trim listed below.
- Fits 2025-2026 Honda Civic, front right
- Fits 2023-2025 Honda Accord, front right
- Fits 2013-2017 Honda Accord, front right
- Fits 2016-2022 Honda HR-V, front right
Quality Assurance
Dynamite Friction DFC brake components are built around application-specific fitment and measured rotor specifications for accurate replacement selection. Part number 633-59037R is listed for the confirmed Honda applications shown above, including Honda Civic, Honda Accord, and Honda HR-V front right use.
Description
Dynamite Friction DFC Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-59037R, is a vented front right disc brake rotor built for specific Honda applications. It combines a slotted X drilled surface with a black zinc hat finish and rust-resistant coating for a clean, service-ready appearance.
Key Features
- Part number: 633-59037R
- Disc brake rotor for the front right position
- Slotted X drilled brake surface for directional braking performance
- Vented rotor design
- Outside diameter: 293 mm
- Nominal thickness: 25 mm
- Discard thickness: 23 mm
- Center hole diameter: 64.1 mm
- 5-bolt, 5-lug pattern with 114.3 mm bolt circle diameter
- Black zinc hat finish with rust-resistant coating
Product Details
This DFC rotor is engineered for Honda Civic, Honda Accord, and Honda HR-V front right brake applications listed below. The directional slotted X drilled surface is paired with a plain disc finish and vented construction to match the fitment and braking layout of the specified vehicles. The black hat finish helps maintain a cleaner appearance in the wheel area, while the rust-resistant coating adds protection to exposed surfaces. If you are searching for a Honda Civic front right drilled and slotted rotor or a Honda Accord front right brake rotor, part number 633-59037R is the exact reference to use.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Rotor wear that requires replacement at the front right corner
- Brake surface scoring or uneven contact on the existing rotor
- Corrosion on exposed rotor and hat surfaces
- Brake service needs on Honda Civic, Honda Accord, or Honda HR-V front right applications
- Replacement needs for a vented, drilled and slotted rotor with the correct 5-lug fitment
Installation Notes and Tips
Verify rotor dimensions, bolt circle diameter, center hole diameter, and position before installation. This rotor is directional, so confirm the correct side and orientation during service. For best results, inspect pads, caliper condition, and hub surfaces before installing the new rotor. Confirm compatibility with the exact vehicle year and trim listed below.
- Fits 2025-2026 Honda Civic, front right
- Fits 2023-2025 Honda Accord, front right
- Fits 2013-2017 Honda Accord, front right
- Fits 2016-2022 Honda HR-V, front right
Quality Assurance
Dynamite Friction DFC brake components are built around application-specific fitment and measured rotor specifications for accurate replacement selection. Part number 633-59037R is listed for the confirmed Honda applications shown above, including Honda Civic, Honda Accord, and Honda HR-V front right use.
