Dynamite Friction 633-54062R Disc Brake Rotor - Front Right
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-54062R, is a vented front right disc brake rotor built for select Ford, Lincoln, and Taurus applications. Its slotted X drilled surface, black zinc hat finish, and rust-resistant coating support consistent braking performance and corrosion protection.
Key Features
- Part number 633-54062R for direct reference
- 325 mm outside diameter with 30 mm nominal thickness and 28.5 mm discard thickness
- Vented rotor design for front brake use
- Slotted X drilled directional braking surface
- Black zinc hat finish with rust-resistant coating
- 5-lug pattern with 114.3 mm bolt circle diameter
- 68 mm center hole diameter and 14.3 mm bolt hole diameter
Product Details
The DFC Brake Rotor - Drilled and Slotted - Black is engineered as a front right disc brake rotor for 2009-2010 Ford Flex, 2010 Ford Taurus, 2009-2010 Lincoln MKS, and 2010 Lincoln MKT applications. The directional slotted and drilled surface is paired with a vented rotor body to help manage heat and maintain a stable brake surface under repeated stops. The black-coated hat adds a clean finish while the rust-resistant coating helps protect exposed surfaces. Part number 633-54062R is a direct match for the listed fitments, including 2010 Ford Taurus front right applications with and without the Performance Package.
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on application-specific rotors with performance-oriented surface machining and corrosion-resistant finishes. For buyers searching for a 2009-2010 Ford Flex front right brake rotor, 2010 Lincoln MKT front right rotor, or 2010 Ford Taurus front right drilled and slotted rotor, this part provides the listed dimensions and fitment details in one replacement component.
What This Rotor Helps Address
- Brake pulsation caused by uneven rotor wear
- Heat buildup during repeated braking events
- Surface corrosion on exposed rotor areas
- Reduced braking consistency from worn front rotors
- Fitment issues when replacing the front right rotor on listed Ford and Lincoln models
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, center hole diameter, and position before installation. This rotor is listed for the front right position only, so confirm side and axle placement before ordering. Inspect pads, caliper condition, and hub surface during replacement to help ensure proper rotor seating and braking performance. Part number 633-54062R should be matched to the vehicle application exactly as listed.
Quality Assurance
This Dynamite Friction rotor is built with a rust-resistant coating and a black zinc hat finish for added surface protection. Confirmed fitment includes 2009-2010 Ford Flex front right, 2010 Ford Taurus front right, 2009-2010 Lincoln MKS front right, and 2010 Lincoln MKT front right applications.
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-54062R, is a vented front right disc brake rotor built for select Ford, Lincoln, and Taurus applications. Its slotted X drilled surface, black zinc hat finish, and rust-resistant coating support consistent braking performance and corrosion protection.
Key Features
- Part number 633-54062R for direct reference
- 325 mm outside diameter with 30 mm nominal thickness and 28.5 mm discard thickness
- Vented rotor design for front brake use
- Slotted X drilled directional braking surface
- Black zinc hat finish with rust-resistant coating
- 5-lug pattern with 114.3 mm bolt circle diameter
- 68 mm center hole diameter and 14.3 mm bolt hole diameter
Product Details
The DFC Brake Rotor - Drilled and Slotted - Black is engineered as a front right disc brake rotor for 2009-2010 Ford Flex, 2010 Ford Taurus, 2009-2010 Lincoln MKS, and 2010 Lincoln MKT applications. The directional slotted and drilled surface is paired with a vented rotor body to help manage heat and maintain a stable brake surface under repeated stops. The black-coated hat adds a clean finish while the rust-resistant coating helps protect exposed surfaces. Part number 633-54062R is a direct match for the listed fitments, including 2010 Ford Taurus front right applications with and without the Performance Package.
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on application-specific rotors with performance-oriented surface machining and corrosion-resistant finishes. For buyers searching for a 2009-2010 Ford Flex front right brake rotor, 2010 Lincoln MKT front right rotor, or 2010 Ford Taurus front right drilled and slotted rotor, this part provides the listed dimensions and fitment details in one replacement component.
What This Rotor Helps Address
- Brake pulsation caused by uneven rotor wear
- Heat buildup during repeated braking events
- Surface corrosion on exposed rotor areas
- Reduced braking consistency from worn front rotors
- Fitment issues when replacing the front right rotor on listed Ford and Lincoln models
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, center hole diameter, and position before installation. This rotor is listed for the front right position only, so confirm side and axle placement before ordering. Inspect pads, caliper condition, and hub surface during replacement to help ensure proper rotor seating and braking performance. Part number 633-54062R should be matched to the vehicle application exactly as listed.
Quality Assurance
This Dynamite Friction rotor is built with a rust-resistant coating and a black zinc hat finish for added surface protection. Confirmed fitment includes 2009-2010 Ford Flex front right, 2010 Ford Taurus front right, 2009-2010 Lincoln MKS front right, and 2010 Lincoln MKT front right applications.
Description
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-54062R, is a vented front right disc brake rotor built for select Ford, Lincoln, and Taurus applications. Its slotted X drilled surface, black zinc hat finish, and rust-resistant coating support consistent braking performance and corrosion protection.
Key Features
- Part number 633-54062R for direct reference
- 325 mm outside diameter with 30 mm nominal thickness and 28.5 mm discard thickness
- Vented rotor design for front brake use
- Slotted X drilled directional braking surface
- Black zinc hat finish with rust-resistant coating
- 5-lug pattern with 114.3 mm bolt circle diameter
- 68 mm center hole diameter and 14.3 mm bolt hole diameter
Product Details
The DFC Brake Rotor - Drilled and Slotted - Black is engineered as a front right disc brake rotor for 2009-2010 Ford Flex, 2010 Ford Taurus, 2009-2010 Lincoln MKS, and 2010 Lincoln MKT applications. The directional slotted and drilled surface is paired with a vented rotor body to help manage heat and maintain a stable brake surface under repeated stops. The black-coated hat adds a clean finish while the rust-resistant coating helps protect exposed surfaces. Part number 633-54062R is a direct match for the listed fitments, including 2010 Ford Taurus front right applications with and without the Performance Package.
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on application-specific rotors with performance-oriented surface machining and corrosion-resistant finishes. For buyers searching for a 2009-2010 Ford Flex front right brake rotor, 2010 Lincoln MKT front right rotor, or 2010 Ford Taurus front right drilled and slotted rotor, this part provides the listed dimensions and fitment details in one replacement component.
What This Rotor Helps Address
- Brake pulsation caused by uneven rotor wear
- Heat buildup during repeated braking events
- Surface corrosion on exposed rotor areas
- Reduced braking consistency from worn front rotors
- Fitment issues when replacing the front right rotor on listed Ford and Lincoln models
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, center hole diameter, and position before installation. This rotor is listed for the front right position only, so confirm side and axle placement before ordering. Inspect pads, caliper condition, and hub surface during replacement to help ensure proper rotor seating and braking performance. Part number 633-54062R should be matched to the vehicle application exactly as listed.
Quality Assurance
This Dynamite Friction rotor is built with a rust-resistant coating and a black zinc hat finish for added surface protection. Confirmed fitment includes 2009-2010 Ford Flex front right, 2010 Ford Taurus front right, 2009-2010 Lincoln MKS front right, and 2010 Lincoln MKT front right applications.
