Dynamite Friction 633-54062L Disc Brake Rotor - Front Left
Drilled and Slotted Front Left Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-54062L, is a vented disc brake rotor built for the front left position. It features a slotted X drilled surface, a zinc black hat finish, and a rust resistant coating for added corrosion protection.
Compatible with select Ford Flex, Ford Taurus, Lincoln MKS, and Lincoln MKT applications, this rotor is sized for a 325 mm outside diameter, 30 mm nominal thickness, and 28.5 mm discard thickness. The directional braking surface and 5-lug, 114.3 mm bolt circle layout support the specified fitment.
DFC Brake Rotor Line Details
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on rotor construction that combines drilled and slotted surface geometry with a black-coated hat finish. For buyers searching for a Ford Taurus front left brake rotor or a Lincoln MKS drilled and slotted rotor, this line provides a direct replacement format with the listed OE-style dimensions.
Key Features
- Part number 633-54062L
- Front left disc brake rotor
- Slotted X drilled surface type
- Vented rotor design
- Zinc black hat finish
- Rust resistant coating
- 5 bolt holes with 114.3 mm bolt circle diameter
- 325 mm outside diameter
Detailed Description
This Dynamite Friction rotor is built for vehicles that require a front left vented disc brake rotor with a directional braking surface. The drilled and slotted face supports consistent pad contact, while the black hat finish and rust resistant coating help maintain a cleaner appearance on exposed brake components. The rotor measures 47.1 mm in overall height, 68 mm center hole diameter, and 14.3 mm stud/lug hole diameter.
Searches for a 2010 Ford Taurus front left drilled and slotted brake rotor, a 2009-2010 Ford Flex front left rotor, or a 2009-2010 Lincoln MKS front left brake rotor point to this application. The 633-54062L part number is also relevant for 2010 Lincoln MKT front left brake rotor replacement needs.
What This Rotor Helps Address
- Front left rotor replacement for worn brake surfaces
- Brake pulsation caused by rotor wear or thickness loss
- Corrosion on exposed rotor and hat surfaces
- Uneven pad contact on a directional brake surface
- Service needs on Ford Flex, Ford Taurus, Lincoln MKS, and Lincoln MKT front brake systems
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and position before installation. This rotor is listed for the front left position only, so confirm side-specific fitment on the vehicle before ordering. Inspect pads, caliper condition, and hub surface during brake service to ensure proper rotor seating and braking performance.
Quality Assurance
Dynamite Friction identifies this rotor with a rust resistant coating, zinc black hat finish, and specified dimensional tolerances for the listed applications. Part number 633-54062L is cataloged for direct fitment on the vehicles shown below.
Compatible Vehicles
- Fits 2009-2010 Ford Flex, front left
- Fits 2010 Ford Taurus, front left
- Fits 2009-2010 Lincoln MKS, front left
- Fits 2010 Lincoln MKT, front left
Drilled and Slotted Front Left Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-54062L, is a vented disc brake rotor built for the front left position. It features a slotted X drilled surface, a zinc black hat finish, and a rust resistant coating for added corrosion protection.
Compatible with select Ford Flex, Ford Taurus, Lincoln MKS, and Lincoln MKT applications, this rotor is sized for a 325 mm outside diameter, 30 mm nominal thickness, and 28.5 mm discard thickness. The directional braking surface and 5-lug, 114.3 mm bolt circle layout support the specified fitment.
DFC Brake Rotor Line Details
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on rotor construction that combines drilled and slotted surface geometry with a black-coated hat finish. For buyers searching for a Ford Taurus front left brake rotor or a Lincoln MKS drilled and slotted rotor, this line provides a direct replacement format with the listed OE-style dimensions.
Key Features
- Part number 633-54062L
- Front left disc brake rotor
- Slotted X drilled surface type
- Vented rotor design
- Zinc black hat finish
- Rust resistant coating
- 5 bolt holes with 114.3 mm bolt circle diameter
- 325 mm outside diameter
Detailed Description
This Dynamite Friction rotor is built for vehicles that require a front left vented disc brake rotor with a directional braking surface. The drilled and slotted face supports consistent pad contact, while the black hat finish and rust resistant coating help maintain a cleaner appearance on exposed brake components. The rotor measures 47.1 mm in overall height, 68 mm center hole diameter, and 14.3 mm stud/lug hole diameter.
Searches for a 2010 Ford Taurus front left drilled and slotted brake rotor, a 2009-2010 Ford Flex front left rotor, or a 2009-2010 Lincoln MKS front left brake rotor point to this application. The 633-54062L part number is also relevant for 2010 Lincoln MKT front left brake rotor replacement needs.
What This Rotor Helps Address
- Front left rotor replacement for worn brake surfaces
- Brake pulsation caused by rotor wear or thickness loss
- Corrosion on exposed rotor and hat surfaces
- Uneven pad contact on a directional brake surface
- Service needs on Ford Flex, Ford Taurus, Lincoln MKS, and Lincoln MKT front brake systems
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and position before installation. This rotor is listed for the front left position only, so confirm side-specific fitment on the vehicle before ordering. Inspect pads, caliper condition, and hub surface during brake service to ensure proper rotor seating and braking performance.
Quality Assurance
Dynamite Friction identifies this rotor with a rust resistant coating, zinc black hat finish, and specified dimensional tolerances for the listed applications. Part number 633-54062L is cataloged for direct fitment on the vehicles shown below.
Compatible Vehicles
- Fits 2009-2010 Ford Flex, front left
- Fits 2010 Ford Taurus, front left
- Fits 2009-2010 Lincoln MKS, front left
- Fits 2010 Lincoln MKT, front left
Original: $175.74
-65%$175.74
$61.51Description
Drilled and Slotted Front Left Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-54062L, is a vented disc brake rotor built for the front left position. It features a slotted X drilled surface, a zinc black hat finish, and a rust resistant coating for added corrosion protection.
Compatible with select Ford Flex, Ford Taurus, Lincoln MKS, and Lincoln MKT applications, this rotor is sized for a 325 mm outside diameter, 30 mm nominal thickness, and 28.5 mm discard thickness. The directional braking surface and 5-lug, 114.3 mm bolt circle layout support the specified fitment.
DFC Brake Rotor Line Details
The DFC Brake Rotor - Drilled and Slotted - Black line focuses on rotor construction that combines drilled and slotted surface geometry with a black-coated hat finish. For buyers searching for a Ford Taurus front left brake rotor or a Lincoln MKS drilled and slotted rotor, this line provides a direct replacement format with the listed OE-style dimensions.
Key Features
- Part number 633-54062L
- Front left disc brake rotor
- Slotted X drilled surface type
- Vented rotor design
- Zinc black hat finish
- Rust resistant coating
- 5 bolt holes with 114.3 mm bolt circle diameter
- 325 mm outside diameter
Detailed Description
This Dynamite Friction rotor is built for vehicles that require a front left vented disc brake rotor with a directional braking surface. The drilled and slotted face supports consistent pad contact, while the black hat finish and rust resistant coating help maintain a cleaner appearance on exposed brake components. The rotor measures 47.1 mm in overall height, 68 mm center hole diameter, and 14.3 mm stud/lug hole diameter.
Searches for a 2010 Ford Taurus front left drilled and slotted brake rotor, a 2009-2010 Ford Flex front left rotor, or a 2009-2010 Lincoln MKS front left brake rotor point to this application. The 633-54062L part number is also relevant for 2010 Lincoln MKT front left brake rotor replacement needs.
What This Rotor Helps Address
- Front left rotor replacement for worn brake surfaces
- Brake pulsation caused by rotor wear or thickness loss
- Corrosion on exposed rotor and hat surfaces
- Uneven pad contact on a directional brake surface
- Service needs on Ford Flex, Ford Taurus, Lincoln MKS, and Lincoln MKT front brake systems
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and position before installation. This rotor is listed for the front left position only, so confirm side-specific fitment on the vehicle before ordering. Inspect pads, caliper condition, and hub surface during brake service to ensure proper rotor seating and braking performance.
Quality Assurance
Dynamite Friction identifies this rotor with a rust resistant coating, zinc black hat finish, and specified dimensional tolerances for the listed applications. Part number 633-54062L is cataloged for direct fitment on the vehicles shown below.
Compatible Vehicles
- Fits 2009-2010 Ford Flex, front left
- Fits 2010 Ford Taurus, front left
- Fits 2009-2010 Lincoln MKS, front left
- Fits 2010 Lincoln MKT, front left
