Dynamite Friction 633-47052R Disc Brake Rotor - Rear Right
Drilled and Slotted Rear Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-47052R, is a rear right disc brake rotor built for specific Chevrolet applications. It features a slotted X drilled surface, a zinc black hat finish, and a rust resistant coating for a clean, service-ready appearance.
Compatible With 2022-2023 Chevrolet Bolt EUV, rear right; 2017-2023 Chevrolet Bolt EV, rear right; 2016-2019 Chevrolet Cruze, rear right; and 2016-2019 Chevrolet Volt, rear right. The 633-47052R rotor is also listed for 2016-2019 Cruze models with either Chevrolet Performance upgraded brakes or standard brakes, depending on front rotor size.
Key Features
- Part number 633-47052R rear right disc brake rotor
- Slotted X drilled brake surface for directional braking performance
- Solid rotor design with 264 mm outside diameter
- Nominal thickness: 10 mm; discard thickness: 8 mm
- 5-lug pattern with 105 mm bolt circle diameter
- 60 mm center hole diameter and 14 mm lug holes
- Zinc black hat finish with rust resistant coating
- Plain disc finish
Product Details
This Dynamite Friction rotor is engineered as a direct-fit rear right replacement for Chevrolet Bolt EV, Chevrolet Bolt EUV, Chevrolet Cruze, and Chevrolet Volt applications listed in the fitment data. The directional slotted and drilled surface supports consistent brake contact, while the black-coated hat and rust resistant coating help maintain a cleaner appearance over time. If you are replacing a worn rear rotor on a 2022-2023 Bolt EUV or a 2017-2023 Bolt EV, 633-47052R provides the correct dimensions and bolt pattern for the specified vehicles.
Common Problems This Rotor Can Address
- Rear rotor wear that has reached discard thickness
- Brake pulsation caused by uneven rotor surfaces
- Corrosion on the rotor hat or exposed metal surfaces
- Noise or vibration from a worn rear brake rotor
- Replacement needs for drilled and slotted rear brake service
Installation Notes and Tips
Verify rear right position, bolt circle diameter, center hole diameter, and rotor thickness before installation. This rotor is directional, so install it in the correct orientation for the rear right side. Confirm vehicle brake configuration on 2016-2019 Chevrolet Cruze models, since fitment differs between standard brakes and Chevrolet Performance upgraded brakes. Always inspect pads, caliper condition, and hub surface before completing brake service.
Quality Assurance
Dynamite Friction supplies this DFC Brake Rotor - Drilled and Slotted - Black as a specification-based replacement part for the listed Chevrolet applications. Part number 633-47052R is built around the published dimensions and finish details for accurate fitment and consistent service replacement.
Drilled and Slotted Rear Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-47052R, is a rear right disc brake rotor built for specific Chevrolet applications. It features a slotted X drilled surface, a zinc black hat finish, and a rust resistant coating for a clean, service-ready appearance.
Compatible With 2022-2023 Chevrolet Bolt EUV, rear right; 2017-2023 Chevrolet Bolt EV, rear right; 2016-2019 Chevrolet Cruze, rear right; and 2016-2019 Chevrolet Volt, rear right. The 633-47052R rotor is also listed for 2016-2019 Cruze models with either Chevrolet Performance upgraded brakes or standard brakes, depending on front rotor size.
Key Features
- Part number 633-47052R rear right disc brake rotor
- Slotted X drilled brake surface for directional braking performance
- Solid rotor design with 264 mm outside diameter
- Nominal thickness: 10 mm; discard thickness: 8 mm
- 5-lug pattern with 105 mm bolt circle diameter
- 60 mm center hole diameter and 14 mm lug holes
- Zinc black hat finish with rust resistant coating
- Plain disc finish
Product Details
This Dynamite Friction rotor is engineered as a direct-fit rear right replacement for Chevrolet Bolt EV, Chevrolet Bolt EUV, Chevrolet Cruze, and Chevrolet Volt applications listed in the fitment data. The directional slotted and drilled surface supports consistent brake contact, while the black-coated hat and rust resistant coating help maintain a cleaner appearance over time. If you are replacing a worn rear rotor on a 2022-2023 Bolt EUV or a 2017-2023 Bolt EV, 633-47052R provides the correct dimensions and bolt pattern for the specified vehicles.
Common Problems This Rotor Can Address
- Rear rotor wear that has reached discard thickness
- Brake pulsation caused by uneven rotor surfaces
- Corrosion on the rotor hat or exposed metal surfaces
- Noise or vibration from a worn rear brake rotor
- Replacement needs for drilled and slotted rear brake service
Installation Notes and Tips
Verify rear right position, bolt circle diameter, center hole diameter, and rotor thickness before installation. This rotor is directional, so install it in the correct orientation for the rear right side. Confirm vehicle brake configuration on 2016-2019 Chevrolet Cruze models, since fitment differs between standard brakes and Chevrolet Performance upgraded brakes. Always inspect pads, caliper condition, and hub surface before completing brake service.
Quality Assurance
Dynamite Friction supplies this DFC Brake Rotor - Drilled and Slotted - Black as a specification-based replacement part for the listed Chevrolet applications. Part number 633-47052R is built around the published dimensions and finish details for accurate fitment and consistent service replacement.
Original: $98.69
-65%$98.69
$34.54Description
Drilled and Slotted Rear Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-47052R, is a rear right disc brake rotor built for specific Chevrolet applications. It features a slotted X drilled surface, a zinc black hat finish, and a rust resistant coating for a clean, service-ready appearance.
Compatible With 2022-2023 Chevrolet Bolt EUV, rear right; 2017-2023 Chevrolet Bolt EV, rear right; 2016-2019 Chevrolet Cruze, rear right; and 2016-2019 Chevrolet Volt, rear right. The 633-47052R rotor is also listed for 2016-2019 Cruze models with either Chevrolet Performance upgraded brakes or standard brakes, depending on front rotor size.
Key Features
- Part number 633-47052R rear right disc brake rotor
- Slotted X drilled brake surface for directional braking performance
- Solid rotor design with 264 mm outside diameter
- Nominal thickness: 10 mm; discard thickness: 8 mm
- 5-lug pattern with 105 mm bolt circle diameter
- 60 mm center hole diameter and 14 mm lug holes
- Zinc black hat finish with rust resistant coating
- Plain disc finish
Product Details
This Dynamite Friction rotor is engineered as a direct-fit rear right replacement for Chevrolet Bolt EV, Chevrolet Bolt EUV, Chevrolet Cruze, and Chevrolet Volt applications listed in the fitment data. The directional slotted and drilled surface supports consistent brake contact, while the black-coated hat and rust resistant coating help maintain a cleaner appearance over time. If you are replacing a worn rear rotor on a 2022-2023 Bolt EUV or a 2017-2023 Bolt EV, 633-47052R provides the correct dimensions and bolt pattern for the specified vehicles.
Common Problems This Rotor Can Address
- Rear rotor wear that has reached discard thickness
- Brake pulsation caused by uneven rotor surfaces
- Corrosion on the rotor hat or exposed metal surfaces
- Noise or vibration from a worn rear brake rotor
- Replacement needs for drilled and slotted rear brake service
Installation Notes and Tips
Verify rear right position, bolt circle diameter, center hole diameter, and rotor thickness before installation. This rotor is directional, so install it in the correct orientation for the rear right side. Confirm vehicle brake configuration on 2016-2019 Chevrolet Cruze models, since fitment differs between standard brakes and Chevrolet Performance upgraded brakes. Always inspect pads, caliper condition, and hub surface before completing brake service.
Quality Assurance
Dynamite Friction supplies this DFC Brake Rotor - Drilled and Slotted - Black as a specification-based replacement part for the listed Chevrolet applications. Part number 633-47052R is built around the published dimensions and finish details for accurate fitment and consistent service replacement.
