Dynamite Friction 631-03064R Disc Brake Rotor - Front Right
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver, part number 631-03064R, is a vented front right disc brake rotor built for the 2019-2022 Hyundai Veloster N with the standard package and red calipers without the N logo. It features a 330 mm outside diameter, directional slotted X drilled surface, and a zinc silver hat finish with rust-resistant coating.
For shoppers searching for a 2019-2022 Hyundai Veloster N front right brake rotor, 631-03064R provides the correct fitment details and rotor dimensions for this application. The silver finish and vented construction support a clean OE-style appearance with performance-oriented rotor surface design.
- Fits 2019-2022 Hyundai Veloster N, front right
- 330 mm outside diameter with 52.8 mm overall height
- Vented rotor construction for front axle use
- Directional slotted X drilled braking surface
- Zinc silver hat finish with rust-resistant coating
- 5-lug pattern with 114.3 mm bolt circle diameter
- Center hole diameter: 69 mm
- Nominal thickness: 30 mm; discard thickness: 28 mm
Product Details and Fitment
This DFC Brake Rotor - Drilled and Slotted - Silver is engineered as a direct replacement disc brake rotor for the front right position on the Hyundai Veloster N. The rotor uses a plain disc finish with a slotted X drilled surface and directional brake face, along with 12.6 mm bolt holes and a 5-hole layout. Part number 631-03064R is the reference to use when matching the correct rotor for this specific vehicle configuration.
The Brand Line identifies this rotor as part of Dynamite Friction’s drilled and slotted silver rotor line, which focuses on application-specific fitment, corrosion protection, and a performance-style surface design. This part cross-references no listed alternate part numbers for the same application.
What This Rotor Helps Address
- Front right rotor wear on a 2019-2022 Hyundai Veloster N
- Brake pulsation caused by a worn or uneven rotor surface
- Corrosion on the rotor hat or exposed metal surfaces
- Reduced braking consistency from an out-of-spec rotor
- Replacement needs for the standard package with red calipers without N logo
Installation Notes and Quality
Install on the front right position only and verify rotor dimensions, bolt circle diameter, center hole diameter, and thickness before installation. Confirm the vehicle is equipped with the standard package and red calipers without the N logo, as listed in the fitment data for the 330 mm front disc application. Proper brake service procedures should be followed, including inspection of pads, caliper condition, and hub surface cleanliness.
Quality is supported by the rotor’s rust-resistant coating, zinc silver hat finish, and application-specific dimensions for the 2019-2022 Hyundai Veloster N. Part number 631-03064R is built to match the confirmed fitment and rotor specification shown above.
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver, part number 631-03064R, is a vented front right disc brake rotor built for the 2019-2022 Hyundai Veloster N with the standard package and red calipers without the N logo. It features a 330 mm outside diameter, directional slotted X drilled surface, and a zinc silver hat finish with rust-resistant coating.
For shoppers searching for a 2019-2022 Hyundai Veloster N front right brake rotor, 631-03064R provides the correct fitment details and rotor dimensions for this application. The silver finish and vented construction support a clean OE-style appearance with performance-oriented rotor surface design.
- Fits 2019-2022 Hyundai Veloster N, front right
- 330 mm outside diameter with 52.8 mm overall height
- Vented rotor construction for front axle use
- Directional slotted X drilled braking surface
- Zinc silver hat finish with rust-resistant coating
- 5-lug pattern with 114.3 mm bolt circle diameter
- Center hole diameter: 69 mm
- Nominal thickness: 30 mm; discard thickness: 28 mm
Product Details and Fitment
This DFC Brake Rotor - Drilled and Slotted - Silver is engineered as a direct replacement disc brake rotor for the front right position on the Hyundai Veloster N. The rotor uses a plain disc finish with a slotted X drilled surface and directional brake face, along with 12.6 mm bolt holes and a 5-hole layout. Part number 631-03064R is the reference to use when matching the correct rotor for this specific vehicle configuration.
The Brand Line identifies this rotor as part of Dynamite Friction’s drilled and slotted silver rotor line, which focuses on application-specific fitment, corrosion protection, and a performance-style surface design. This part cross-references no listed alternate part numbers for the same application.
What This Rotor Helps Address
- Front right rotor wear on a 2019-2022 Hyundai Veloster N
- Brake pulsation caused by a worn or uneven rotor surface
- Corrosion on the rotor hat or exposed metal surfaces
- Reduced braking consistency from an out-of-spec rotor
- Replacement needs for the standard package with red calipers without N logo
Installation Notes and Quality
Install on the front right position only and verify rotor dimensions, bolt circle diameter, center hole diameter, and thickness before installation. Confirm the vehicle is equipped with the standard package and red calipers without the N logo, as listed in the fitment data for the 330 mm front disc application. Proper brake service procedures should be followed, including inspection of pads, caliper condition, and hub surface cleanliness.
Quality is supported by the rotor’s rust-resistant coating, zinc silver hat finish, and application-specific dimensions for the 2019-2022 Hyundai Veloster N. Part number 631-03064R is built to match the confirmed fitment and rotor specification shown above.
Original: $150.14
-65%$150.14
$52.55Description
Drilled and Slotted Front Right Rotor
The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver, part number 631-03064R, is a vented front right disc brake rotor built for the 2019-2022 Hyundai Veloster N with the standard package and red calipers without the N logo. It features a 330 mm outside diameter, directional slotted X drilled surface, and a zinc silver hat finish with rust-resistant coating.
For shoppers searching for a 2019-2022 Hyundai Veloster N front right brake rotor, 631-03064R provides the correct fitment details and rotor dimensions for this application. The silver finish and vented construction support a clean OE-style appearance with performance-oriented rotor surface design.
- Fits 2019-2022 Hyundai Veloster N, front right
- 330 mm outside diameter with 52.8 mm overall height
- Vented rotor construction for front axle use
- Directional slotted X drilled braking surface
- Zinc silver hat finish with rust-resistant coating
- 5-lug pattern with 114.3 mm bolt circle diameter
- Center hole diameter: 69 mm
- Nominal thickness: 30 mm; discard thickness: 28 mm
Product Details and Fitment
This DFC Brake Rotor - Drilled and Slotted - Silver is engineered as a direct replacement disc brake rotor for the front right position on the Hyundai Veloster N. The rotor uses a plain disc finish with a slotted X drilled surface and directional brake face, along with 12.6 mm bolt holes and a 5-hole layout. Part number 631-03064R is the reference to use when matching the correct rotor for this specific vehicle configuration.
The Brand Line identifies this rotor as part of Dynamite Friction’s drilled and slotted silver rotor line, which focuses on application-specific fitment, corrosion protection, and a performance-style surface design. This part cross-references no listed alternate part numbers for the same application.
What This Rotor Helps Address
- Front right rotor wear on a 2019-2022 Hyundai Veloster N
- Brake pulsation caused by a worn or uneven rotor surface
- Corrosion on the rotor hat or exposed metal surfaces
- Reduced braking consistency from an out-of-spec rotor
- Replacement needs for the standard package with red calipers without N logo
Installation Notes and Quality
Install on the front right position only and verify rotor dimensions, bolt circle diameter, center hole diameter, and thickness before installation. Confirm the vehicle is equipped with the standard package and red calipers without the N logo, as listed in the fitment data for the 330 mm front disc application. Proper brake service procedures should be followed, including inspection of pads, caliper condition, and hub surface cleanliness.
Quality is supported by the rotor’s rust-resistant coating, zinc silver hat finish, and application-specific dimensions for the 2019-2022 Hyundai Veloster N. Part number 631-03064R is built to match the confirmed fitment and rotor specification shown above.
