Dynamite Friction 600-40018 Disc Brake Rotor - Front
Front Vented Brake Rotor for Chrysler and Dodge
The Dynamite Friction DFC Brake Rotor, part number 600-40018, is a front disc brake rotor built for select Chrysler and Dodge applications. It features a vented design with a 297 mm outside diameter, 54 mm height, and 5-bolt pattern for direct-fit replacement use on listed vehicles.
DFC Brake Rotor Line Details
The DFC Brake Rotor line focuses on replacement rotors with application-specific dimensions and fitment. This 600-40018 rotor is sized for front axle use on vehicles that require a 297 mm vented rotor, helping maintain the original brake system geometry on the listed Chrysler 300M, Concorde, Intrepid, and LHS applications.
Key Features
- Part number 600-40018
- Front disc brake rotor for select Chrysler and Dodge models
- Vented rotor construction for front brake use
- Outside diameter: 297 mm
- Nominal thickness: 26.1 mm
- Discard thickness: 24.4 mm
- Height: 54 mm
- 5 bolt holes with 14.5 mm bolt hole diameter
- Inside diameter: 73.5 mm
Detailed Description
Dynamite Friction 600-40018 is a vented front brake rotor engineered around the listed dimensional requirements for Chrysler and Dodge sedans using 297 mm front rotors. It is a direct replacement option for 1998-2004 Chrysler Concorde, 1998-2004 Chrysler Intrepid, 1999-2004 Chrysler 300M, and 1999-2001 Chrysler LHS front brake applications, plus the corresponding Dodge Intrepid listings. If you are searching for a front brake rotor for a 1999-2004 Chrysler 300M, front, or a 2001-2004 Dodge Intrepid, front, this part number 600-40018 matches the specified fitment data.
What This Rotor Helps Address
- Front brake pulsation caused by worn rotor surfaces
- Brake noise related to rotor wear or uneven braking contact
- Reduced braking consistency from rotors below discard thickness
- Service replacement needs for 297 mm front rotor applications
- Fitment issues when replacing a vented front rotor on listed Chrysler and Dodge models
Installation Notes and Tips
Verify rotor diameter, height, bolt pattern, and thickness before installation. This rotor is listed for front position only and is not for Performance Package applications where noted. Confirm wheel and brake package details on 1998-2000 Chrysler and Dodge Intrepid and Concorde models, since some listings specify 16-inch or 17-inch wheels and 297 mm front rotors. For best results, inspect pads, calipers, and hub surfaces during brake service and replace components as needed to restore even braking contact.
Quality Assurance
Use the published dimensions and vehicle fitment data to confirm application before ordering. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Front Vented Brake Rotor for Chrysler and Dodge
The Dynamite Friction DFC Brake Rotor, part number 600-40018, is a front disc brake rotor built for select Chrysler and Dodge applications. It features a vented design with a 297 mm outside diameter, 54 mm height, and 5-bolt pattern for direct-fit replacement use on listed vehicles.
DFC Brake Rotor Line Details
The DFC Brake Rotor line focuses on replacement rotors with application-specific dimensions and fitment. This 600-40018 rotor is sized for front axle use on vehicles that require a 297 mm vented rotor, helping maintain the original brake system geometry on the listed Chrysler 300M, Concorde, Intrepid, and LHS applications.
Key Features
- Part number 600-40018
- Front disc brake rotor for select Chrysler and Dodge models
- Vented rotor construction for front brake use
- Outside diameter: 297 mm
- Nominal thickness: 26.1 mm
- Discard thickness: 24.4 mm
- Height: 54 mm
- 5 bolt holes with 14.5 mm bolt hole diameter
- Inside diameter: 73.5 mm
Detailed Description
Dynamite Friction 600-40018 is a vented front brake rotor engineered around the listed dimensional requirements for Chrysler and Dodge sedans using 297 mm front rotors. It is a direct replacement option for 1998-2004 Chrysler Concorde, 1998-2004 Chrysler Intrepid, 1999-2004 Chrysler 300M, and 1999-2001 Chrysler LHS front brake applications, plus the corresponding Dodge Intrepid listings. If you are searching for a front brake rotor for a 1999-2004 Chrysler 300M, front, or a 2001-2004 Dodge Intrepid, front, this part number 600-40018 matches the specified fitment data.
What This Rotor Helps Address
- Front brake pulsation caused by worn rotor surfaces
- Brake noise related to rotor wear or uneven braking contact
- Reduced braking consistency from rotors below discard thickness
- Service replacement needs for 297 mm front rotor applications
- Fitment issues when replacing a vented front rotor on listed Chrysler and Dodge models
Installation Notes and Tips
Verify rotor diameter, height, bolt pattern, and thickness before installation. This rotor is listed for front position only and is not for Performance Package applications where noted. Confirm wheel and brake package details on 1998-2000 Chrysler and Dodge Intrepid and Concorde models, since some listings specify 16-inch or 17-inch wheels and 297 mm front rotors. For best results, inspect pads, calipers, and hub surfaces during brake service and replace components as needed to restore even braking contact.
Quality Assurance
Use the published dimensions and vehicle fitment data to confirm application before ordering. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Description
Front Vented Brake Rotor for Chrysler and Dodge
The Dynamite Friction DFC Brake Rotor, part number 600-40018, is a front disc brake rotor built for select Chrysler and Dodge applications. It features a vented design with a 297 mm outside diameter, 54 mm height, and 5-bolt pattern for direct-fit replacement use on listed vehicles.
DFC Brake Rotor Line Details
The DFC Brake Rotor line focuses on replacement rotors with application-specific dimensions and fitment. This 600-40018 rotor is sized for front axle use on vehicles that require a 297 mm vented rotor, helping maintain the original brake system geometry on the listed Chrysler 300M, Concorde, Intrepid, and LHS applications.
Key Features
- Part number 600-40018
- Front disc brake rotor for select Chrysler and Dodge models
- Vented rotor construction for front brake use
- Outside diameter: 297 mm
- Nominal thickness: 26.1 mm
- Discard thickness: 24.4 mm
- Height: 54 mm
- 5 bolt holes with 14.5 mm bolt hole diameter
- Inside diameter: 73.5 mm
Detailed Description
Dynamite Friction 600-40018 is a vented front brake rotor engineered around the listed dimensional requirements for Chrysler and Dodge sedans using 297 mm front rotors. It is a direct replacement option for 1998-2004 Chrysler Concorde, 1998-2004 Chrysler Intrepid, 1999-2004 Chrysler 300M, and 1999-2001 Chrysler LHS front brake applications, plus the corresponding Dodge Intrepid listings. If you are searching for a front brake rotor for a 1999-2004 Chrysler 300M, front, or a 2001-2004 Dodge Intrepid, front, this part number 600-40018 matches the specified fitment data.
What This Rotor Helps Address
- Front brake pulsation caused by worn rotor surfaces
- Brake noise related to rotor wear or uneven braking contact
- Reduced braking consistency from rotors below discard thickness
- Service replacement needs for 297 mm front rotor applications
- Fitment issues when replacing a vented front rotor on listed Chrysler and Dodge models
Installation Notes and Tips
Verify rotor diameter, height, bolt pattern, and thickness before installation. This rotor is listed for front position only and is not for Performance Package applications where noted. Confirm wheel and brake package details on 1998-2000 Chrysler and Dodge Intrepid and Concorde models, since some listings specify 16-inch or 17-inch wheels and 297 mm front rotors. For best results, inspect pads, calipers, and hub surfaces during brake service and replace components as needed to restore even braking contact.
Quality Assurance
Use the published dimensions and vehicle fitment data to confirm application before ordering. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
