Dynamite Friction 4514-80014 Disc Brake Kit - Front and Rear
Brake Kit for Mazda CX-7
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 2007-2012 Mazda CX-7. Part number 4514-80014 combines coated rotors, ceramic pads, and matching hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2007-2012 Mazda CX-7, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Part number 4514-80014 for brake service identification
Product Details
DFC Complete Brake Kits are organized to simplify brake service by combining the major wear components needed for a full axle job. This kit uses DFC GEOSPEC coated rotors, which are processed dry and ready to install, helping reduce prep time during service. The rotors are machined to OE-style tolerances and inspected for balance and critical dimensions, while the vented rotors receive electronic mill-balancing when required.
The 5000 Advanced brake pads are formulated for stable friction performance and are assembled with premium shims to help control brake noise and pedal harshness. The hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction to address worn or corroded brake hardware during service. Part number 4514-80014 is a direct service solution for Mazda CX-7 brake replacement work.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake components
Installation Notes
Fits 2007-2012 Mazda CX-7, front and rear. Before installation, confirm rotor size and brake configuration against the vehicle’s existing components. Clean all mating surfaces, inspect calipers and slides, and follow the manufacturer’s bed-in procedure after installation. The coated rotor surface is designed to be installed dry and will wear away normally during braking.
Quality Assurance
DFC rotors are manufactured to OE-style specifications and each rotor is covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for consistent friction performance, and the hardware kit is engineered to OE form, fit, and function. Part number 4514-80014 is built for dependable brake service on the Mazda CX-7.
Brake Kit for Mazda CX-7
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 2007-2012 Mazda CX-7. Part number 4514-80014 combines coated rotors, ceramic pads, and matching hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2007-2012 Mazda CX-7, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Part number 4514-80014 for brake service identification
Product Details
DFC Complete Brake Kits are organized to simplify brake service by combining the major wear components needed for a full axle job. This kit uses DFC GEOSPEC coated rotors, which are processed dry and ready to install, helping reduce prep time during service. The rotors are machined to OE-style tolerances and inspected for balance and critical dimensions, while the vented rotors receive electronic mill-balancing when required.
The 5000 Advanced brake pads are formulated for stable friction performance and are assembled with premium shims to help control brake noise and pedal harshness. The hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction to address worn or corroded brake hardware during service. Part number 4514-80014 is a direct service solution for Mazda CX-7 brake replacement work.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake components
Installation Notes
Fits 2007-2012 Mazda CX-7, front and rear. Before installation, confirm rotor size and brake configuration against the vehicle’s existing components. Clean all mating surfaces, inspect calipers and slides, and follow the manufacturer’s bed-in procedure after installation. The coated rotor surface is designed to be installed dry and will wear away normally during braking.
Quality Assurance
DFC rotors are manufactured to OE-style specifications and each rotor is covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for consistent friction performance, and the hardware kit is engineered to OE form, fit, and function. Part number 4514-80014 is built for dependable brake service on the Mazda CX-7.
Original: $362.49
-65%$362.49
$126.87Description
Brake Kit for Mazda CX-7
The Dynamite Friction DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is built for front and rear brake service on the 2007-2012 Mazda CX-7. Part number 4514-80014 combines coated rotors, ceramic pads, and matching hardware in one service kit for a complete brake refresh.
Key Features
- Fits 2007-2012 Mazda CX-7, front and rear
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- 5000 Advanced ceramic brake pads with post-cured friction material
- Scorched pad surface to reduce initial break-in time
- Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
- Non-directional rotor finish for more even pad bed-in and smoother braking
- Part number 4514-80014 for brake service identification
Product Details
DFC Complete Brake Kits are organized to simplify brake service by combining the major wear components needed for a full axle job. This kit uses DFC GEOSPEC coated rotors, which are processed dry and ready to install, helping reduce prep time during service. The rotors are machined to OE-style tolerances and inspected for balance and critical dimensions, while the vented rotors receive electronic mill-balancing when required.
The 5000 Advanced brake pads are formulated for stable friction performance and are assembled with premium shims to help control brake noise and pedal harshness. The hardware kit uses PTFE coating, vulcanized rubber, and stainless steel construction to address worn or corroded brake hardware during service. Part number 4514-80014 is a direct service solution for Mazda CX-7 brake replacement work.
Common Brake Issues This Kit Can Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping performance from worn pads
- Rust buildup on exposed rotor surfaces
- Uneven pad wear from aged brake components
Installation Notes
Fits 2007-2012 Mazda CX-7, front and rear. Before installation, confirm rotor size and brake configuration against the vehicle’s existing components. Clean all mating surfaces, inspect calipers and slides, and follow the manufacturer’s bed-in procedure after installation. The coated rotor surface is designed to be installed dry and will wear away normally during braking.
Quality Assurance
DFC rotors are manufactured to OE-style specifications and each rotor is covered by a 12-month warranty against defects in material and workmanship. The 5000 Advanced pads are post-cured and scorched for consistent friction performance, and the hardware kit is engineered to OE form, fit, and function. Part number 4514-80014 is built for dependable brake service on the Mazda CX-7.
