Dynamite Friction 4514-80009 Disc Brake Kit - Front and Rear
Brake Kit for Mazda 3 and Mazda 3 Sport
Built for front and rear service on select Mazda applications, this DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic pads, and matching hardware in one package. Part number 4514-80009 is engineered for 2004-2013 Mazda 3 and 2010-2013 Mazda 3 Sport brake service.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor surface helps reduce prep time during brake service
- G3000/G11H18 cast iron construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic brake pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC Friction designed this complete brake service kit to bring together the rotor, pad, and hardware components needed for a full front and rear brake refresh. The GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required for consistent operation. The 5000 Advanced ceramic pads are formulated for broad vehicle coverage and stable stopping performance, while the hardware kit addresses worn or corroded clips and related brake noise concerns. Part number 4514-80009 is a direct-fit brake kit for Mazda 3 and Mazda 3 Sport applications listed below.
Compatible With
- Fits 2004-2013 Mazda 3, front and rear
- Fits 2010-2013 Mazda 3 Sport, front and rear
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping consistency from aged pads
- Longer install time from oil-coated replacement rotors
- Uneven pad wear from worn caliper hardware
Installation Notes
Each rotor is processed dry and ready to install, which eliminates the need to clean off protective oil before assembly. The non-directional finish supports faster pad bed-in, and the included hardware should be inspected against the original brake setup before installation. For Mazda 3 and Mazda 3 Sport brake service, follow factory torque specifications and verify rotor orientation and pad fitment on both axles.
Quality Assurance
DFC states that each rotor passes 100% inspection for critical attributes and meets OE specifications. The rotors carry a 12-month warranty against defects in material and workmanship.
Brake Kit for Mazda 3 and Mazda 3 Sport
Built for front and rear service on select Mazda applications, this DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic pads, and matching hardware in one package. Part number 4514-80009 is engineered for 2004-2013 Mazda 3 and 2010-2013 Mazda 3 Sport brake service.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor surface helps reduce prep time during brake service
- G3000/G11H18 cast iron construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic brake pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC Friction designed this complete brake service kit to bring together the rotor, pad, and hardware components needed for a full front and rear brake refresh. The GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required for consistent operation. The 5000 Advanced ceramic pads are formulated for broad vehicle coverage and stable stopping performance, while the hardware kit addresses worn or corroded clips and related brake noise concerns. Part number 4514-80009 is a direct-fit brake kit for Mazda 3 and Mazda 3 Sport applications listed below.
Compatible With
- Fits 2004-2013 Mazda 3, front and rear
- Fits 2010-2013 Mazda 3 Sport, front and rear
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping consistency from aged pads
- Longer install time from oil-coated replacement rotors
- Uneven pad wear from worn caliper hardware
Installation Notes
Each rotor is processed dry and ready to install, which eliminates the need to clean off protective oil before assembly. The non-directional finish supports faster pad bed-in, and the included hardware should be inspected against the original brake setup before installation. For Mazda 3 and Mazda 3 Sport brake service, follow factory torque specifications and verify rotor orientation and pad fitment on both axles.
Quality Assurance
DFC states that each rotor passes 100% inspection for critical attributes and meets OE specifications. The rotors carry a 12-month warranty against defects in material and workmanship.
Original: $311.12
-65%$311.12
$108.89Description
Brake Kit for Mazda 3 and Mazda 3 Sport
Built for front and rear service on select Mazda applications, this DFC brake kit combines GEOSPEC coated rotors, 5000 Advanced ceramic pads, and matching hardware in one package. Part number 4514-80009 is engineered for 2004-2013 Mazda 3 and 2010-2013 Mazda 3 Sport brake service.
Key Features
- DFC GEOSPEC coated rotors with a silver-gray corrosion-resistant finish
- Dry-to-install rotor surface helps reduce prep time during brake service
- G3000/G11H18 cast iron construction for OE-style durability and stability
- Non-directional rotor finish supports even pad bed-in and smoother braking
- 5000 Advanced ceramic brake pads are post-cured and scorched for stable friction
- Premium rubber-steel-rubber shims help reduce noise, vibration, and harshness
- Hardware kit uses PTFE coating, vulcanized rubber, and stainless steel
Product Details
DFC Friction designed this complete brake service kit to bring together the rotor, pad, and hardware components needed for a full front and rear brake refresh. The GEOSPEC coated rotors are machined to tight tolerances, inspected for critical dimensions, and balanced where required for consistent operation. The 5000 Advanced ceramic pads are formulated for broad vehicle coverage and stable stopping performance, while the hardware kit addresses worn or corroded clips and related brake noise concerns. Part number 4514-80009 is a direct-fit brake kit for Mazda 3 and Mazda 3 Sport applications listed below.
Compatible With
- Fits 2004-2013 Mazda 3, front and rear
- Fits 2010-2013 Mazda 3 Sport, front and rear
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Helps Address
- Brake pulsation from worn or uneven rotors
- Noise caused by fatigued or corroded hardware
- Reduced stopping consistency from aged pads
- Longer install time from oil-coated replacement rotors
- Uneven pad wear from worn caliper hardware
Installation Notes
Each rotor is processed dry and ready to install, which eliminates the need to clean off protective oil before assembly. The non-directional finish supports faster pad bed-in, and the included hardware should be inspected against the original brake setup before installation. For Mazda 3 and Mazda 3 Sport brake service, follow factory torque specifications and verify rotor orientation and pad fitment on both axles.
Quality Assurance
DFC states that each rotor passes 100% inspection for critical attributes and meets OE specifications. The rotors carry a 12-month warranty against defects in material and workmanship.
